What are the opening hours?

Monday 09:00 - 17:30 Tuesday 08:30 - 17:30 Wednesday 09:00 - 17:30 Thursday 08:30 - 17:30 Friday 08:30 - 17:30

Osstem MEA

Name: Osstem MEA
Address: G23, inside DAFZA, Dubai, 371629, AE
Telephone: +97143491922

Osstem Middle East is a subsidiary of Osstem Implant Co., Ltd.

The company was founded in Dubai, UAE in 2020 to expand its market and support distribution in the Middle East and Africa.

17/08/2026

A 5mm ridge does not always need a graft.

MS is a one-body implant with a minimum diameter of Ø2.0 — in a 5mm ridge
that leaves 1.5mm of clearance on each side, so placement is possible without
bone grafting. The abutment is integrated with the body in Grade 5 titanium,
so there is no screw joint to loosen, and both static and fatigue fracture
testing were run at that smallest diameter.

Two further specifications cover the rest: a ball-type version for
overdentures with an O-ring attachment, and a provisional version that bends
up to 30° for temporary prostheses.

Micro solution. Full result.

Comment 'DM' for more information.

13/08/2026

SSIII is a tissue-level implant — the connection sits above the bone, so the
prosthetic margin stays accessible and the crown margin rests on the implant
rather than the abutment. Sink-down is prevented, the load is carried by the
implant instead of the screw, and the thicker wall at the stress concentration
area gives around twice the strength of TS at the same diameter.

The body is a 1.5° taper. Same design, same protocol as TSIII. And when
placement runs deep, ComOcta Plus compensates the gingival height without
moving the margin.

Above the bone. On purpose.

05/08/2026

Graft space is only useful if it holds.

OssBuilder is a 3D pre-formed titanium membrane in biocompatible Grade 4
titanium. It secures directly to the implant with the OB anchor, or holds
space on its own with a tenting screw where implant placement is not
feasible — supporting vertical and horizontal augmentation over 10mm.
The rounded contour seats firmly on the alveolar bone and keeps its shape
under soft tissue pressure.

No cutting. No bending. No bone tacks.

Comment 'DM' for more information.

31/07/2026

Your planning is already digital. Your drilling should be too.

OneGuide carries the plan from CT data all the way into bone — position, angulation and depth set from the final prosthesis, then held there by double contact between the guide and the prepared bone. Three drilling steps on average, flapless, with the temporary fabricated alongside the guide.

Four kits: edentulous jaw, maxillary sinus, nerve proximity, narrow ridge.

Plan on screen. Place in bone.

Comment 'DM' for more information.

28/07/2026

No more black lines.

The Link Abutment delivers aesthetic digital restorations without metal show-through — even with thin gingiva. Open type for narrow anterior width, Cylinder type for high occlusal load in the premolar region.

Screw access angled up to 20°. Anti-rotation, anti-separation fit. 48 options across type, diameter, height, and G/H.

Every angle. Every case.

Comment 'DM' for more information.

23/07/2026

Any angle. Any case. One system.

The Multi Abutment corrects the prosthetic path of screw-type implant restorations — up to 48° between Multi Abutments, and up to 78° when combined with the Multi Angled Abutment.

Natural contour. Simple placement. Built for every case — from a single bridge to a full arch.

Comment 'DM' for more information.

17/07/2026

No bone? No problem.

The Short Implant is built for limited vertical bone — no bone grafting needed. Place confidently in the posterior mandible and maxilla, even with as little as 4mm of residual bone.
Short on length. Not on performance.

Comment 'DM' for more information.

14/07/2026

Narrow ridge? No problem.
The ESSET KIT is built for safe alveolar ridge expansion in narrow bone — bi-directional, sequential expansion without buccal plate fracture.
Precise placement. Strong stability. Built-in protection.

Comment 'DM' for more information.

09/07/2026

Soft bone. Sinus lift. Immediate placement. These are the cases that demand more — and ET IV is built for all of them.

With a 6° tapered body, open thread design, and progressive apical thread depth, ET IV gently condenses bone while delivering strong, controlled primary stability. The result: cortical bone preservation and long-term osseointegration success.

Comment 'DM' for more details or to request your free sample.

01/07/2026

122 Khalas!! The 122 Taper KIT is built for tapered body implant surgery — fewer steps, lower heat, and consistent performance that lasts beyond 100 uses.

Precision geometry. Integrated depth control. One kit for every bone type.

Comment 'DM' for more information.

Address

G23, Inside DAFZA
Dubai
371629

Opening Hours

Monday	09:00 - 17:30
Tuesday	08:30 - 17:30
Wednesday	09:00 - 17:30
Thursday	08:30 - 17:30
Friday	08:30 - 17:30

Telephone

+97143491922

Website

http://en.osstem.com/

Alerts

Be the first to know and let us send you an email when Osstem MEA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Want your business to be the top-listed Engineering Company in Dubai?