07/07/2020
1103-Panel Connections
The client has some drawings already and would like a 3D design, and some ideas on different panel connections.
Well, he sent a design already done to show us, it is not a normal type of building we used to work with.
It is aluminum post and beam structure, that has panels attached to plywood from the inside and outside, it is a modular building,
He would like to show a detailed plan and maybe get better ideas that are better than what he using already.
It is similar to the container house. But all modular and uses panels that are connected with fast mount connectors. He asked for different renders on the inside and outside. and wanted advice on certain panel connections if something would work better for the connections and making it weather tight.
Similar to the building being modular it can change panels as the client wishes with different finishes and thicknesses. So you can show all the connections use in detail. The aluminum is extrusions so no need to know how it all fixes together. And panel sizes thicknesses? with some pics to show the details of the structure.
The red is the main primary framing 100mm x 100mm extruded aluminum. And the green is the secondary framing 50mm x 100mm extruded aluminum. Will use SIPs panels for the roof 150mm thick.
would probably use plywood for the walls and then the main interior panels of choice can be fast mount clipped on to the plywood. And come up with a better method of using the fast mount clips.
