GWD Industrial GmbH

Startseite
Österreich
Marchtrenk
GWD Industrial GmbH

Schleifscheiben Abrichtmaschinen mit höchster Präzision.

Informieren Sie sich jetzt unter [email protected]
Wir beraten Sie gerne und stehen Ihnen für Fragen jederzeit zur Verfügung.

05/11/2026

Wir bauen Abrichtmaschinen für Schleifscheiben, und zwar nicht nebenbei, sondern ausschließlich.

Von der manuellen GWDress-250 über die SmartLine bis zur GWDress-500 für Scheiben bis Ø 500 mm. Mit einem Ziel: das Abrichten zurück in Ihre eigene Produktion zu holen.

Wie das im Detail funktioniert, zeigen wir im vollständigen Video auf YouTube.
Deutsch: https://youtu.be/80ik6L7BLpc

—

We build dressing machines for grinding wheels – not on the side, but exclusively.

From the manual GWDress-250 to the SmartLine and the GWDress-500 for wheels up to Ø 500 mm. With one goal: bringing dressing back into your own production.

See exactly how it works in the full video on YouTube.
English: https://youtu.be/DekAN5pdAm8

04/11/2026

🗣️ Five questions we hear at every trade fair, and our honest answers.

After enough days on a booth, you notice the same questions coming back. So here they are, in one place:

❓ Is it worth it for small batches?
❓ Which wheel diameters?
❓ Can we use our own profiles?
❓ Do we pay for software licences?
❓ Who sets the machine up?

👉 Swipe through for the full answers.

💬 Which question is missing? Ask it in the comments. We answer every one.

31/10/2026

🎃 What's the scariest thing in a grinding shop?

Not ghosts.
A wheel that has quietly lost its profile, and nobody noticed until the measuring report came back. 👻

📉 Tolerances drifting over the shift.
🗑️ A pile of parts that have to be scrapped.
⏳ And a set-up that starts all over again.

The cure is less spooky: a stored profile, checked by camera, corrected in the same cycle. ✅

💬 What's the scariest thing that ever happened on your shop floor?

26/10/2026

Built in Austria. Since day one.

On Austria's National Day we want to say thank you: to our team in the hall, to our partners and suppliers in the region, and to every customer who trusts a machine made here. 🤝

Engineering, assembly and testing all happen under one roof, and that won't change.

Einen schönen Nationalfeiertag!

23/10/2026

♻️ Why buy a new grinding wheel when the old one is still good?

Most wheels are taken out of service with plenty of abrasive left. They didn't wear out - they lost their profile. 🛞

Dressing restores the geometry for a fraction of the price of a replacement, and it keeps your set-up exactly where it is: no new alignment, no new trial parts, no new measuring report.

🧮 Count how many wheels you replaced last quarter, then count how many were actually used up. The difference is your saving.

19/10/2026

📐 From DXF file to finished profile. Four steps, no trial and error.

1️⃣ Import your profile as a DXF — no redrawing, no manual coordinates, no transcription errors.
2️⃣ GWDress Studio converts it into the dressing path.
3️⃣ The camera system measures what actually came out.
4️⃣ Profile correction closes the gap, inside the same cycle.

The point of the sequence is that nothing is estimated. Every step is either your data or a measurement. ✅

👉 Swipe through all four steps.
💬 Then send us your profile and we will check feasibility and tolerances.

15/10/2026

💪 Machines built to perform. Day after day.

A dressing machine doesn't prove itself on the first day. It proves itself on day 500, on the night shift, with a hard wheel and a tight tolerance.

That's what we build for:

🏗️ A rigid frame, so the profile holds under load.
⚙️ Industrial components that are still available years from now.
🛞 A 48-hour test run on real wheels before every delivery.
🎯 Repeatability to ±2 µm, shift after shift.

No drama, no downtime. Just a machine that does its job, every day. ✅

💬 How long has your oldest machine been running without a major repair?

11/10/2026

💬 "We don't sell machines. We sell the time they give back."

A dressing machine does not appear in your part price. It appears in the hours you no longer lose. ⏱️

Where those hours are hiding today:

⏳ Wheels sent out to a supplier — transport, queue, transport back. Two weeks per wheel is normal, and in the meantime you grind with a spare that has a slightly different profile.
🔁 Set-up after every wheel change — new alignment, new trial parts, new measuring report before the first good part.
🗑️ Trial parts that exist only because nobody can verify the profile before grinding.
🙋 One experienced operator who is the only person able to get the profile right, and whose holiday shows up in your quality data.

With a GWDress those hours move back into production: the profile is stored once, repeated to ±2 µm, and reproducible by whoever is on shift. ✅

🧮 Count the hours your team spends getting a wheel back into profile this month. That number is the actual business case — not the purchase price.

07/10/2026

🤫 What we would never tell you…

…but we know exactly how your machine needs to be installed. Because we built it, tested it, and set it up ourselves. 🔧

Here is what that means in practice:

🏭 The same team assembles, aligns, and test-runs every GWDress in our hall in Austria
🚚 We deliver it ourselves and travel with it. No subcontractor learning your machine on site.
📐 On arrival we level it, align the axes, load your profiles, and run the first parts with your operators until the tolerance sits.
✅ You do not get a crate and a manual. You get a machine that is already producing.

03/10/2026

"Manual doesn't mean outdated. It means you stay in control."

Julian, CEO of GWD Industrial.

For small batches and frequently changing profiles, a manual GWDress is often the faster answer: no programming, no set-up overhead, a skilled operator and a repeatable mechanical guide.

Automation earns its place at volume. Below that, control wins.

Which one fits your batch sizes? Let's find out: https://www.gwd-industrial.com/

Adresse

Carl-Auer-von-Welsbach-Straße 6a
Marchtrenk
4614

Website

http://www.gwd-industrial.com/, https://www.instagram.com/gwdindustrial/

Benachrichtigungen

Erfahren Sie als Erste/r von Neuigkeiten und Aktionen: Wir schicken Ihnen eine E-Mail, wenn GWD Industrial GmbH etwas veröffentlicht. Ihre E-Mail-Adresse wird für keinen anderen Zweck verwendet, und Sie können sich jederzeit abmelden.