20/09/2026
Anchor fixings driven straight through a dead flat metal pan, then sealed over. Every fixing a hole, every hole a leak.
This one didn’t need a patch, it needed rebuilding. And instead of a screed, the client went with a tapered board system.
Old pan and flashings stripped. Substrate ground back, primed and sealed. Vapour barrier membrane bonded over the full deck, under the insulation, so moisture from inside can’t get up into the boards. Then tapered boards bonded down on adhesive beads, no mechanical fixings, so nothing new goes through the roof. Boards cut to a tapered plan so the whole deck falls to the outlet. Sheet membrane over the lot and up every upstand as one continuous.
Lighter than screed, no wet trade sitting in the middle of your program, and the fall is set by the layout plan instead of how well someone screeds on the day.
B.Proof Waterproofing | QBCC Licence 15599535
Brisbane, Gold Coast, Sunshine Coast
0422 544 411 - [email protected]