Next Level Creations

Home
Next Level Creations

Custom aluminium, steel and stainless fabrications. From airbox, intakes and intercooler/piping, as well a bar work and all general fabrication jobs.

Get in contact with us today to see us bring your creations to the next level.

22/05/2026

What's not to love about a grandpa spec ln106 single cab with a tub 😍😍😍
Few little bar work jobs lately, set of sliders for the Ln106 single cab, running back to the rear wheel and some brush bars on a N60 running some roll cage joiners to the arb bar and existing sliders 👌👌👌

25/03/2026

Billet 1kz egr throttle body adaptors!!

Been working on these little buggers for a while now and couldn't be happier with the result. World first i think for the egr style adaptors?!?!?

International shipping available!

These will replace the old welded style throttle body adaptors that were really fiddly and time consuming to make.

The billet design promotes thicker sealing surface with a 12mm base fl**ge.
Improved flow with no internal welds.
And most importantly, a sleek and sharp look, 100% because who doesn't like billet bling!

These will be included with my 1kz hilux front mount kits for the cable style throttles, so the price of those kits will be adjusted accordingly.

Proudly Australian designed and machined!

Live on the website now!

https://www.nextlevelcreations.com.au/store/p/new-billet-1kz-egr-throttle-body-adaptor

16/03/2026

Elijah's super tidy 1kz swapped ln106 all finished up and couldn't be happier with this one.

- Full 3" stainless exhaust with a hurricane muffler keeping it nice and legal, full v band system, 4mm double skinned dump pipe mount.

- 2.5" stainless intercooler piping to the front mount intercooler he had already mounted

- 3" intake pipe to suit. Took advantage of no aircon with this one and ran the intake around the front of the motor. Keeping it further away from the heat of the manifold. With a custom airbox outlet to make it all work.

This thing definitely a few steps closer to being on the road now!

06/03/2026

Reid's Mitsubishi Challanger all wrapped up with a custom snorkel and airbox.
Really taking pride in these custom airboxs
✅️ fully CNC routered airbox
✅️ CNC routered 4mm mounts
✅️ billet maf sensor housing for this Challanger
✅️ Australian made UniFilter custom induction pod
✅️ CNC routered clear acrylic lid and logo

Also woth a 4" raw snorkel plumbed up, using the existing safari snorkel pillar mounts. Unfortunately was unable to cover the safari hole due to the length an positing of the safari snorkel but have made up a little cover plate for this that untill the customer gets a fresh guard then we will refit 👌👌

13/02/2026

First one for the year. From about a month ago.
I had a goal this year to be better on the socials and post more. We're now in February and here's my first post so we're not off to a red hot start 🤣🤣🤣

But here's a VZN luxy from early Jan we fitted a driver's side snorkel and airbox combo as well as a new intake pipe to suit!

Now! Most of you wouldn't know but I actually moved house/ shed early December so was a wild end to the year. BUT now about 8 weeks later im finally fully up and organised in the new place and getting back up too date with orders!

Few exciting new Billet products coming and well as some updates on some existing products. So watch this space!

20/12/2025

Last luxy for the year!
Rainer's black SR5 1kz luxy in for the works. Fitting up one of my 1kz front mount intercooler kits, 4" snorkel, airbox and 3" intake pipe with a trusty UniFilter.

Should be running super happy now for Christmas festivities.

Now! Orders wise. I have just finished up moving house/ shed about 2 weeks ago. So on the back for a bit with orders.i have approx 20 orders that will be going out Monday! So keep an eye on your emails, could be in the post Monday. It not It will be in the new year!

28/11/2025

Kayde's big LS swapped GU in for a 5" snorkel and airbox combo with a washer bottle.
We also did a custom end cap to tie it all together.
Unfortunately the correct size Unifilter didn't turn up in time for the photos 😕 but these will take a 4" x 9" UniFilter.
I will be making a few small tweaks to the washer bottle then these Airbox/ washer bottles will be available for purchase.
Airbox is full CNC routered for the ultimate in accuracy and finish. With a 4.5mm neoprene rubber single peice gasket seal and a 10mm thick CNC routered and engraved lid.

15/08/2025

Patrol lower mount replacments 👌
With the factory mounts being only 3mm thick they are well known for bending and breaking. Quick simple and easy solution are these 6mm replacments! 💪💪
Designed to replicate the factory arm mount these are a great upgrade that can be done when doing long arms or at any time to prevent damage on the trails!

Now live on the website!

https://www.nextlevelcreations.com.au/store/p/nissan-patrol-6mm-lower-control-arm-mounts

01/08/2025

Been seeing all these front end Friday posts so thought maby jump on it and get a thread going.
Matt's ln106 bar all finished up today and ready for powdercoating next week.
P.s. my phone has been running red hot this week and haven't got back to alot of people but will do my best to reply to all over the weekend.
Let's see those front ends!

18/07/2025

Bryce's big GU barwork all finished up!
Been a big effort on this thing fully wrapping it in barwork with bullbar, brush bars, sliders and rear bar. With 40° tyres and a 2" body lift to contend with, full custom was the only way!
Bullbar came up a treat keeping the approach angle as tight as i could whilst covering the body lift gap and squeezing in a highmount winch. With a big 60mm centre hoop and 48mm outers into the brush bars.
Then into some fairly basic but neat sliders to help you get into the thing!
And quater chopping the rear was a must to keep the departure angle as good as possible whilst again covering the 2" body lift gap. With some neat little kickers to protect the rear corners/ tail lights.
All finished off in a texture black powdercoat finish.
Owner is absolutely wrapped and super keen to smash it into some rocks!

Address

Opening Hours

Monday	08:00 - 17:00
Tuesday	08:00 - 17:00
Wednesday	08:00 - 17:00
Thursday	08:00 - 17:00
Friday	08:00 - 17:00

Telephone

+61406000052

Website

http://www.nextlevelcreations.com.au/

Alerts

Be the first to know and let us send you an email when Next Level Creations posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Next Level Creations:

Want your business to be the top-listed Engineering Company?

Country:

City: