Energy Smart Alberta

Energy Smart Alberta Albertas Trusted Solar Advisors

Working in Alberta means dealing with extremes. Whether it’s freezing your hands off roughing in a house in January or s...
04/28/2026

Working in Alberta means dealing with extremes. Whether it’s freezing your hands off roughing in a house in January or sweating through your coveralls pulling wire in a hot attic in July, the weather dictates how we work. Spring brings its own challenges—muddy job sites, unpredictable temperatures, and the rush to get exterior work done before the next unexpected snowstorm. Managing your tools, your materials, and your own energy levels is a constant balancing act. It takes a certain kind of resilience to thrive in the trades here.

What’s the toughest seasonal challenge you face on the job site, and how do you handle it? Sound off below.

Sunday Code Recap — let’s talk AFCI. We see a lot of confusion around CEC Rule 26-710, especially on renovations.Here’s ...
04/26/2026

Sunday Code Recap — let’s talk AFCI. We see a lot of confusion around CEC Rule 26-710, especially on renovations.

Here’s the straight talk: if you’re adding new receptacles in a bedroom, they need Arc-Fault Circuit Interrupter protection. Period. It’s not just a recommendation — it’s what inspectors are looking for right out of the gate.

A common mistake we see is trying to get away with just a standard breaker when extending a circuit. If you touch it, you bring it up to code. It saves headaches on inspection day and keeps the homeowner safe. Don’t cut corners on this one.

Save this for the job site.

It’s Saturday night, let’s see what you’ve been working on this week! ⚡There’s nothing quite as satisfying as stepping b...
04/26/2026

It’s Saturday night, let’s see what you’ve been working on this week! ⚡

There’s nothing quite as satisfying as stepping back and looking at a perfectly made-up panel. Clean bends, properly torqued lugs, and labels that actually make sense. We know the pride that goes into a top-tier installation.

Drop a photo of your cleanest panel makeup from this week in the comments. Let’s see who’s doing the neatest work in Alberta right now.

Don’t be shy—show off that craftsmanship! 🔧

Solar is booming in Alberta, but what happens when the sun goes down or the grid drops?For residential installs, battery...
04/26/2026

Solar is booming in Alberta, but what happens when the sun goes down or the grid drops?

For residential installs, battery storage is becoming the new standard. Customers are moving past just net metering and asking for true energy independence. When you’re designing a system, you’ve got two main choices for storage: AC-coupled and DC-coupled batteries.

AC-coupled systems are great for retrofitting existing solar setups because they have their own inverter. DC-coupled systems are usually more efficient for new installs since there’s only one power conversion step.

Make sure you’re sizing the battery bank not just for daily use, but considering those long, dark Alberta winter nights.

Are you seeing more customers asking for battery backups on your residential quotes?

Pulling wire in -20°C is a whole different game. If you’ve ever wrestled with stiff NMD90 in an unheated Alberta residen...
04/26/2026

Pulling wire in -20°C is a whole different game. If you’ve ever wrestled with stiff NMD90 in an unheated Alberta residential rough-in, you know the struggle.

Here’s the weekend trade tip: Keep your wire in the truck with the heat on until the exact moment you need it. Better yet, if the site has temporary power, set up a small space heater near your wire spools. Warm wire bends easier, pulls smoother, and won’t crack the jacket when you’re making those tight corners into the panel.

Also, don’t skimp on the pulling l**e for those long conduit runs to detached garages. The cold makes everything stick.

What’s your go-to trick for keeping wire workable on freezing job sites? Drop it in the comments below! 👇

04/24/2026

AFCI breakers aren’t optional, they’re Code. Here’s why they matter on every residential rough-in.

Save this for the job site.

It’s Friday, and the tools are getting packed up for the weekend.Whether you spent the week pulling endless runs of Rome...
04/24/2026

It’s Friday, and the tools are getting packed up for the weekend.

Whether you spent the week pulling endless runs of Romex, fighting with stubborn fish tapes, or finally finishing up a clean panel swap, we want to see it.

There’s nothing quite like stepping back and looking at a perfectly made-up panel or a flawless pipe run before you head home. It’s the kind of work only another sparky truly appreciates.

Drop a photo of your cleanest install from this week in the comments. Let’s see what Alberta’s best have been up to.

Have a great weekend, everyone! Stay safe out there.

With more Alberta homeowners making the switch to EVs, Level 2 charger installs are becoming a weekly staple for residen...
04/24/2026

With more Alberta homeowners making the switch to EVs, Level 2 charger installs are becoming a weekly staple for residential crews. But are you setting your customers up for long-term success?

When sizing a residential EV charger circuit, don’t just look at their current vehicle. A 40-amp breaker might handle their current commuter car, but when they upgrade to an electric truck in three years, they’ll be calling you back complaining about slow charge times.

Always run wire rated for at least a 60-amp circuit (like 6/2 NMD90) if the panel can handle the load calculation. Even if you’re only installing a 40-amp or 50-amp breaker today, future-proofing the wire run saves the homeowner from a costly rewire later and builds massive trust in your expertise.

Remember to factor the continuous load into your residential service calculation according to the CEC.

How many EV charger calls are you getting these days?

Let’s talk about the silent profit killer on residential jobs: hunting for tools and materials in the back of the van.If...
04/24/2026

Let’s talk about the silent profit killer on residential jobs: hunting for tools and materials in the back of the van.

If you’re spending 15 minutes in the morning and 15 minutes packing up just trying to find your wire nuts, staples, or that one specific hole saw, you’re losing hours every week. In a residential service van, organization isn’t just about looking neat — it’s about billable time.

Take 30 minutes this weekend to audit your setup. Group your materials by task (rough-in bins, finishing bins, troubleshooting kits). Keep your daily drivers in a dedicated veto bag or packout that never gets buried.

When you know exactly where everything is, you move faster, look more professional to the homeowner, and get to the next call sooner.

What’s your non-negotiable organization hack for the work van? Drop it in the comments below.

Alright, let’s talk kitchens. We’ve all been there, trying to figure out exactly where to drop those boxes so the inspec...
04/23/2026

Alright, let’s talk kitchens. We’ve all been there, trying to figure out exactly where to drop those boxes so the inspector doesn’t flag us.

Under CEC Rule 26-700, the spacing for receptacles along kitchen counters is strict. You need a receptacle for every 900 mm of usable wall space, and no point along the wall line can be more than 450 mm from a receptacle.

Don’t forget about the islands and peninsulas, either—they have their own specific rules depending on the layout.

Keep your tape measure handy and plan it out before pulling wire.

Save this for the job site. ⚡

Address

Calgary, AB

Website

Alerts

Be the first to know and let us send you an email when Energy Smart Alberta posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category