ARC Coatings

06/05/2026

When the details matter as much as the finish. ✅

We recently finished a powder coating project for a customer who brought in their Polaris parts — still sealed in the factory boxes. When they came to pick everything up, their parts were bubble wrapped and carefully repacked, exactly the way they arrived.

Here's what they had to say:

💬 "The finish looks flawless and whoever handled the coating did an excellent job. I could not have asked for more from you guys. The fact that everything was bubble wrapped and neatly placed back into the boxes was a really professional touch and showed genuine attention to detail in protecting the finish."

That kind of care isn't accidental — it's just how we work.

From surface prep all the way to final packaging, we treat your parts with the same precision we apply to the coating itself. Because a flawless finish means nothing if it's damaged before it ever gets put to use.

Got a powder coating project that deserves that level of attention? We'd love to help.

👇 Send us an email or give us a call to get started!
[email protected]

05/21/2026

Respiratory protection is not optional in coating operations. It is a critical control that directly impacts both worker health and coating quality.

In a shop environment, workers face two distinct exposure risks: hazardous particulate from abrasive blasting and volatile organic compounds (VOCs) from coating application. Each requires a different respiratory solution.

Supplied-air respirators for abrasive blasting. Organic v***r cartridges for solvent exposure. Proper fit testing. Medical clearance. Ongoing training.

These are not recommendations. They are essential safeguards that protect workers throughout their careers in the industrial coatings industry.

At ARC Coatings, safety is not viewed as a checkbox. It is part of the process, the workmanship, and the long-term wellbeing of our team. A worker who cannot breathe properly cannot perform properly and there is no compromise when it comes to health.

Respiratory protection is a technical control that enables safe, precise coating application in demanding industrial environments.

As Rick Morin, President of Morin Group, says:
"No dust is good dust."

05/08/2026

Coating system selection isn't just a product decision — it's an engineering decision. And getting it wrong is one of the most expensive mistakes an asset owner can make.

Here's the framework we follow at ARC to get it right every time:

✅ Define the exposure environment first.
Chemical exposure, temperature range, UV exposure, immersion vs. atmospheric service — each variable narrows your specification significantly.

✅ Assess substrate condition and preparation capability.
High-performance systems demand near-white metal (SSPC-SP 10/NACE 2). Surface-tolerant systems can accommodate a commercial blast (SSPC-SP 6), but that tradeoff costs you longevity. Know what you're accepting before you specify.

✅ Calculate lifecycle cost — not just material cost.
Factor in production downtime, access costs, and reapplication labor. The "cheaper" system rarely ends up being cheaper.

✅ Verify application conditions and contractor capability.
Even a correct specification fails in the wrong hands or the wrong environment. Our climate-controlled shop eliminates one of the biggest variables from that equation.

The right system, properly specified and applied by NACE-certified inspectors with full documentation and traceability, directly protects your equipment reliability and operational continuity.

03/26/2026

Not all coatings are applied under the same conditions 👇

In a controlled shop environment, things like temperature, humidity, and surface condition can be managed consistently across every component.

That level of control has a big impact on:
• coating performance
• finish quality
• long-term durability

It’s one of the key advantages of shop-applied coating systems - especially when consistency and reliability matter.

03/17/2026

Protective coatings take a beating over time - and knowing when to recoat can make a big difference in performance and maintenance costs.

Here are three common signs your equipment may be due for recoating:

• Visible corrosion or rust
• Chalking or fading coatings
• Impact or abrasion damage

A proactive recoating schedule helps protect your equipment and extend its service life - especially in tough industrial environments.

📞 (705) 692-9090
www.arc-coatings.com

03/09/2026

Last week the team was at PDAC 2026 in Toronto connecting with industry partners and meeting new faces.

It was a great few days of conversations around protective coatings, surface preparation, and upcoming projects.

Thanks to everyone who stopped by to chat with us!

Great few days at PDAC 2026.

The teams from Morin Industrial, ARC Coatings, and Pure LaserPrep had an awesome time connecting with people across the industry and sharing what we do.

Thanks to everyone who stopped by Booth 6429N to say hello and grab some swag. Always great catching up with familiar faces and meeting new ones.

Until next year, PDAC!

02/09/2026

Cold temps, big smiles ❄️

Proud to support the Walden Winter Carnival this past weekend. Events like this bring the community together and make winter something to celebrate.

A big thank you to the organizers and volunteers!

02/04/2026

We’re proud to support the Walden Winter Carnival happening February 5th - 8th.
Looking forward to a great weekend celebrating winter with the community.❄️

01/28/2026

ARC Coatings has been providing professional sandblasting and protective coating solutions in the Sudbury area for years.

We specialize in high-performance coating systems, precision surface preparation, and quality workmanship — backed by an experienced team and a state-of-the-art facility.

This page will give a behind-the-scenes look at our work, our process, and the standards we bring to every project.