Boekestyn Custom Welding & Fabrication

Boekestyn Custom Welding & Fabrication Mobile Welding & Custom Metal Fabrication

New levelling feet for this vibration table
10/09/2026

New levelling feet for this vibration table

10/09/2026

I never thought I’d be welding in an arena, but just goes to show the cool places welding brings you.

A fun little project we completed last week. Modifying some painted stainless steel handrails. We had to park on the 7th...
10/09/2026

A fun little project we completed last week. Modifying some painted stainless steel handrails. We had to park on the 7th floor of the parking garage below and run power up to the 10th floor to get this job done.

08/28/2026

Is 1/4” steel Overkill to hold up loading dock lights?

08/17/2026

All new hardware for this Braun cultivator for Southbrook Organic Vineyards

08/13/2026

Stainless steel grape trailer repair for a local farm

06/30/2026

Down time, We all know it, But who wants to wait. I know farmers don’t. We had this sprayer back up in action in 2 hours from “the call” to pto engage

06/30/2026

Here’s a project we just finished up. A local farm has a field that was only accessible by bridge, the existing bridge had seen the effects of time with large rust holes and an un drivable deck. We made the decision that it was time for an upgrade. With help from an experienced operator we removed the old bridge. For the replacement we choose an aluminum highboy trailer that was no longer road worthy. After a day of cutting the axles, landing gear, and air tanks off the aluminum trailer. It was ready to start a new life as a bridge. Unfortunately a few cracks grew along the front and back of the trailer during transportation. After being placed in its new home we came back to site with a few more tools and got the cracks repaired and all the sharp edges removed. Now it’s safe for the farm to bring tractors and other equipment to their field without the risk of flat tires or tractor is the creek.

06/01/2026

Just another day out in the field

Beautiful day to fix an Orchard Rite wind machine for had to park my truck 100 feet away from the wind machine due to w...
04/09/2026

Beautiful day to fix an Orchard Rite wind machine for had to park my truck 100 feet away from the wind machine due to wet fields and two wheel drive. These fans are mounted to a thick concrete pad with four, two foot long anchor bolts which have a big nut holding the fan down to the concrete pad. In this case it was snapped off nearly flush with the fl**ge on the fan and removing the concrete pad just to replace one anchor wasn’t a cost effective solution due to the age of this fan. I was able to make a new washer out of 3/8” plate at my shop and weld it to the broken anchor bolt on site.

Address

Niagara, ON

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Boekestyn Custom Welding & Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category