3DQue Manufacturing

26/09/2025

"The secret behind this consistency is the VAAPR surface. As you can see in the video below, it has incredibly high adhesion while hot but releases parts cleanly and effortlessly when cool.

The bed stays at 60 °C when the printer lifts. And yes - that really is a Post-it note our engineer places on the surface afterward (the release is that clean)."

Read the full blog: https://www.3dque.com/blog/hey-steph-how-do-you-auto-eject-from-corexy-printers

We hear this question all the time: How exactly does auto ejection work on CoreXY printers?‍ Let’s break it down. In this post, I’ll walk you through how our CoreXY auto-ejection system works, the thinking behind it, and why we chose this method over the obvious “just tilt it” approach.

25/09/2025

"Our mission was simple: eject parts without relying on gravity.

Our CoreXY system uses a flex sequence that gently bends the print bed to loosen the part. Right after that, the toolhead performs a carefully calibrated push to slide the print off—no violent fling into a corner, no jammed parts."

Read the full blog: https://www.3dque.com/blog/hey-steph-how-do-you-auto-eject-from-corexy-printers

We hear this question all the time: How exactly does auto ejection work on CoreXY printers?‍ Let’s break it down. In this post, I’ll walk you through how our CoreXY auto-ejection system works, the thinking behind it, and why we chose this method over the obvious “just tilt it” approach.

24/09/2025

We hear this question all the time: How exactly does auto ejection work on CoreXY printers?‍

Let’s break it down. In this post, we’ll walk you through how our CoreXY auto-ejection system works, the thinking behind it, and why we chose this method over the obvious “just tilt it” approach.

Read the blog: https://www.3dque.com/blog/hey-steph-how-do-you-auto-eject-from-corexy-printers

We hear this question all the time: How exactly does auto ejection work on CoreXY printers?‍ Let’s break it down. In this post, I’ll walk you through how our CoreXY auto-ejection system works, the thinking behind it, and why we chose this method over the obvious “just tilt it” approach.

03/09/2025

Running multiple printers with AMS? Your filament slots never line up—so you waste time re-slicing or manually remapping.

Not anymore.

With AutoFarm3D’s AMS Auto Mapping, you just queue your file, set the quantity, and click send. Every printer is automatically mapped—red in slot 2 on one, slot 3 on another—it doesn’t matter. AutoFarm3D gets it right every time.

AMS Auto Mapping in action: https://youtube.com/shorts/Oo8X0e5tkYQ?si=Wx96zzY5vlb-crWK

Tired of reslicing or manually mapping your AMS every time you print on multiple machines?With AutoFarm3D’s AMS Auto Mapping, you just queue the file, set th...

03/09/2025

AMS Auto Mapping in action!

Tired of reslicing or manually mapping your AMS every time you print on multiple machines? With AutoFarm3D’s AMS Auto Mapping, you just queue the file, set the quantity, click send - and we handle the slot mapping for you automatically.

Get AutoFarm3D: https://www.3dque.com/autofarm3d

02/09/2025

"AutoFarm3D doesn’t change how your printers work, it changes how you work.

You don’t have to choose between reliability and flexibility: you can them both. Scalable workflows that integrate with reliable closed systems without disrupting the way they work set you free while keeping your farm running."

Read the full blog: https://www.3dque.com/blog/hey-steph-is-open-hardware-really-dead

Is open hardware really dead? Prusa thinks so. Bambu proves why. But print farms still face one unsolved problem: flexibility.

30/08/2025

Is open hardware really dead? Prusa thinks so. Bambu proves why. But print farms still face one unsolved problem: flexibility.

Read the full blog:

Is open hardware really dead? Prusa thinks so. Bambu proves why. But print farms still face one unsolved problem: flexibility.

29/08/2025

"3DQue’s latest release of AutoFarm3D includes a new feature they call “AMS Mapping”. The idea is to automatically adjust the G-Code of a job to match the particular configuration of materials in a target 3D printer. For example, if the job was sliced to expect pink PLA in slot 3, but it was actually in slot 1, the G-Code would be tweaked automatically to refer to slot 1 instead.

This requires no work for the operator, who simply needs to load the spools in random order. This should significantly simplify the operations."

Read article: https://www.fabbaloo.com/news/3dque-solves-ams-spool-management-for-bambu-lab-print-farms

3DQue just solved a growing issue on large 3D print farms.

29/08/2025

"Closed systems are reliable and consistent [...] You just hit “print” and it works.

But that integration comes with a tradeoff: flexibility.

And for print farm owners with complex operations or who are trying to scale, that’s where things begin to break down."

Read the full blog: https://www.3dque.com/blog/hey-steph-is-open-hardware-really-dead

In a world where “open hardware is dead,” that’s what we believe comes next: open workflows, adaptive automation, and modular systems that let you scale without sacrificing what made you fast in the first place.

26/08/2025

Introducing Automatic AMS Mapping!
­
If you’ve ever had to reslice a file or manually remap AMS slots just to get a print running, we’ve got big news. AMS Mapping is a powerful new feature in AutoFarm3D™ that allows Bambu Lab users to print multicolour files across their entire farm without reslicing or manual colour mapping - even when using third-party filament.

Learn more: https://www.3dque.com/blog/3dque-introduces-ams-auto-mapping

3DQue has released AMS Mapping, a powerful new feature in AutoFarm3D that allows Bambu Lab users to print multicolour file across their entire farm without reslicing or manual colour mapping - even when using third-party filament.

26/06/2025

"With the Door Opener, your enclosed printers:
- Automatically eject completed parts
- Start the next print job as soon as the bed is clear
- Operate 24/7"

Read the full blog: www.3dque.com/blog/enclosed-printing-fully-automated

Enclosures stabilize ambient temperature, improve layer adhesion, and reduce warping. But for anyone operating at scale, enclosed printers have long come with a big constraint: You couldn’t automate them. Until now.

25/06/2025

Print farm operators have asked us to automate enclosed printing, and we're excited to finally do it! What prints are you excited to automate?

https://youtube.com/shorts/8yAtORTDHsY

Introducing the AutoFarm3D Door Opener: the first integrated solution to auto eject high-temp materials that require an enclosure. Designed specifically for ...