Canrd Technology Co., Ltd.

Website Contact the business

Canrd Technology Co., Ltd. One-stop supplier of battery R&D materials, equipment and testing services

2026/11/02

🔋 Coin Cell Assembly Tips | Have You Tried the Inverted Assembly Method?

Struggling with wobbly spacers and springs, or electrodes that shift and wrinkle during coin cell assembly?

Here's a simple alternative: the inverted assembly method! ✨

Why give it a try?
1️⃣ Easier Assembly: Using the negative case as the base helps keep the spring and spacer in place, making assembly more convenient.
2️⃣ Higher Assembly Tolerance: Electrolyte wetting helps the electrode adhere to the spacer. Adding the separator afterward helps keep everything in position and reduces electrode movement and wrinkling.
3️⃣ Know Its Limitations: This method is not suitable for every battery system, particularly high-voltage applications.

📌 Assembly Sequence:
Negative case → Funnel spring → Spacer → Electrolyte → Electrode → Electrolyte → Separator → Electrolyte → Lithium/Sodium metal → Positive case

💡 Sometimes, a small change in assembly technique can make your lab work a lot easier!

Do you prefer the conventional assembly method or the inverted method? Let us know in the comments!

2026/10/30

Don’t cut your own nickel foam discs!
Pre-cut nickel foam discs: ready-to-use
✅ consistent dimension
✅ no waste
✅ save valuable research time
Essential consumable for electrochemistry work.
👉 Search "nickel foam disc" on the Kelude official website.

2026/10/28

🔥 Tired of active material shedding during electrode calendering?

This issue is super common in battery pole piece rolling!

Test comparison👇
✅ Bare Al foil collector: Material falls off after rolling
✅ Carbon-coated Al foil: Pole piece stays intact

Why?
Bare aluminum foil has a smooth surface with poor coating adhesion.
The rough carbon coating layer boosts binding force between the active material and current collector.

If you’re facing material loss in calendering, try carbon-coated aluminum foil! It could fix your pole piece shedding problem.

2026/10/26

🔥Heatable solid-state test mold for solid-state battery lab research

Traditional workflow: Put the whole mold into a thermal chamber.
⏳ Slow, energy-heavy, and cumbersome.

✅ This heated test mold solves the pain point!
Built-in heating system directly warms the sample, no external oven required.

🔬 Core advantages:
• Precise temperature control: ±2 °C steady accuracy
• Integrated heating & sensing design
• Fluororubber O-ring sealing, reliable airtightness
• Split ceramic cavity, easy for heat treatment

⏱️ What you gain:
Test cycle cut from hours to only 30 mins
Minimal thermal delay = more accurate data
Works stably up to 200 °C
Save budget: No large thermal chamber needed

Accelerate your solid electrolyte & ASSB research!

&D

2026/10/23

Uneven pressure ruining your pouch cell tests?

✅Upgraded pressure fixture tutorial

Prep: Assemble mold core → fill & compact powder
Parts: Base plate, top plate, springs, bolts, silicone pads, spacer paper

How to stack:
Paper > Silicone pad > Cell > Silicone pad > Paper
Align on base plate, add top plate
Tune pressure by equalizing 4 spring lengths

Get stable, repeatable test results!

2026/09/30

Do you often face powder‑falling, burrs or uneven discs when punching coin‑cell electrodes?🔋

Poor‑quality punched electrodes will ruin the repeatability of your coin‑cell test results.
Our electrode puncher is specially built for lab coin‑cell sample preparation:
✅Sharp cutting edge & high precision for complete, uniform electrode discs
✅Compatible with cathode, anode, sodium‑ion electrodes and more
✅Glove‑box‑friendly design for sensitive battery materials
✅Various die sizes available for different disc diameters

💡Lab practical tips:
Use weighing paper for ultra‑thin electrodes. Store punched electrodes separately and bake at proper temperature to avoid powder loss and ensure reliable test data.

What’s your biggest pain point during electrode punching? Leave your comment below.
DM us for more equipment information.

&D

Why SEI Formation Defines Lithium-ion Battery Lifespan?The most important moment in a lithium battery's life happens bef...
2026/09/07

Why SEI Formation Defines Lithium-ion Battery Lifespan?

The most important moment in a lithium battery's life happens before it ever leaves the lab.
It's called formation: the first controlled charge and discharge. During it, a microscopically thin layer forms on the anode surface, the SEI (solid electrolyte interphase).
Get that layer right and the cell can stay stable for years. Get it wrong and you see capacity fade, gassing, and short cycle life, no matter how good your materials are.
Formation is where chemistry, temperature, and current all meet. It's why the protocol matters just as much as the recipe.

How much time does your team spend dialing in formation?

2026/08/31

Slurry quality matters for battery performance🔋
What’s your standard for slurry testing? Comment below.

2026/08/28

Fast & clean electrode disc punching ⚡
Perfect for coin‑cell battery lab preparation.

2026/08/27

Stable temp. Reliable results.✅
Testing thermostatic integrated machine.

Address

523000
Dongguan
No. 9 Jinfeng Road, Houjie Town, Guangdong

Alerts

Be the first to know and let us send you an email when Canrd Technology Co., Ltd. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Canrd Technology Co., Ltd.:

Shortcuts

Share

Category