TEYU S&A Chiller

Home
China
Guangzhou
TEYU S&A Chiller

A leading industrial chiller supplier since 2002. Aimed at laser and industrial applications. 230,000+ units delivered worldwide in 2025.

Our water chillers are applicable to cool various kinds of lasers, including CO2 laser, UV laser, fiber laser, YAG laser, ultrafast laser, laser diode and offer different temperature stabilities ranging from ±1℃ to ±0.1℃. They are also applicable to cool different kinds of industrial, medical, analytical and laboratory applications.

27/04/2026

🗯️ Seasonal Fluff & Dust Incoming — How to Keep Your Running Smoothly? 🙋 No worries. TEYU engineers share practical tips: 💡

1⃣. Dust Cleaning
During April–May, it is recommended to clean the dust filter and condenser once a day.

✨Steps:
1) Turn off the chiller power.
2) Remove the dust filter. Use an air gun to blow it clean from the inside out. If fluff or dust is tightly stuck, gently loosen it first with a soft brush.
3) Clean the condenser: keep about 15 cm between the air gun nozzle and the fins. Blow vertically from the inside toward the outside.

*Note:
Do not rinse with water. Wet fluff and dust can stick to the mesh and become harder to remove. If heavy dust buildup is not handled in time, it may trigger high-temperature alarms and cause downtime.

2⃣. Proper Chiller Placement
Maintaining proper spacing and avoiding poor environments can reduce maintenance workload in the long run.

1) Distance from obstacles
Low-power chiller models:
▪️ At least 1.5 m above the top air outlet
▪️ At least 1 m from side air inlets to obstacles

High-power chiller models:
▪️ At least 3.5 m above the top air outlet
▪️ At least 1 m from side air inlets
Insufficient spacing may cause hot air recirculation and reduce cooling efficiency.

2) Environmental requirements
Avoid installing the chiller in areas with: corrosive gases, flammable gases, heavy dust, oil mist, conductive particles, high temperature and humidity, strong magnetic fields, or direct sunlight.

3) Placement method
⭕️ Correct: Place on a flat surface with sufficient space around for ventilation (refer to the manual).
❌ Incorrect: Suspended placement, close to heat sources, attic spaces, confined rooms, or direct sun exposure.

Spending just a few minutes each day cleaning the filter and condenser, combined with proper installation, can significantly reduce chiller failure rates during April and May and help ensure stable production. For more about TEYU chiller maintenance tips, please visit https://www.teyuchiller.com/chiller-maintenance-videos.html 👈

25/04/2026

💥 In high-power , thermal stability directly influences consistency and long term operating cost. The TEYU CWFL-60000 is designed with this balance in mind, supporting 60kW laser systems through dual independent cooling circuits for the laser source and optics. This separation helps maintain stable working conditions without unnecessary energy use. A large cooling capacity, intelligent temperature control, and built-in safety protections contribute to steady day-to-day operation. In practice, this can support smoother production rhythms and more predictable equipment behavior. Rather than focusing on peak specifications alone, many users pay closer attention to how reliably a system performs over time under continuous, high-load conditions.

For more about the fiber laser chiller CWFL-60000, please visit https://www.teyuchiller.com 👈

24/04/2026

📣 Holiday Notice

😃 Dear All,
In observance of International Workers’ Day, our company will be closed from 𝗠𝗮𝘆 𝟭𝘀𝘁 𝘁𝗼 𝗠𝗮𝘆 𝟱𝘁𝗵, 𝟮𝟬𝟮𝟲. We will resume normal business operations on Wednesday, May 6th. ✨

We appreciate your understanding and support. Wishing everyone a restful and enjoyable holiday! For more about TEYU Chiller, please visit www.teyuchiller.com 👈

23/04/2026

😃 The TEYU CWFL-20000 is purpose-built to address the demanding cooling requirements of 20kW high-power laser systems with precision and reliability. Featuring dual independent cooling circuits, it enables simultaneous temperature control of both the fiber laser source and optics, ensuring stable operation and consistent processing quality. With intelligent temperature control and ±1.5°C stability, it effectively minimizes thermal fluctuations that could impact performance. The integrated RS-485 communication allows seamless connection with laser equipment for smarter monitoring and control. Designed for durability, energy efficiency, and continuous operation, the CWFL-20000 delivers dependable cooling that protects critical components and supports long-term productivity in industrial laser applications.

For more about the TEYU chiller CWFL-2000, please visit https://www.teyuchiller.com/high-performance-industrial-cooling-system-cwfl20000.html ❄

22/04/2026

😃📦 Rows of packed crates are staged for dispatch, each containing TEYU configured for fiber laser processing applications. In this batch, some units are heading to tube laser cutting lines for metal components, others to sheet metal fabrication workshops producing electrical enclosures, and several to handheld laser welding stations used in stainless steel assembly.

❄ Every unit represents a client’s trust. Before shipment, rigorous quality control and secure packaging ensure that each chiller arrives in peak condition, ready to support precise, stable operations from day one.

Logistics is more than just moving freight. It is about fulfilling a promise of reliability. While the process is demanding, the knowledge that these machines will soon empower manufacturing facilities globally underscores the importance of every step in the supply chain.

For more about TEYU chillers, please visit www.teyuchiller.com 👈

21/04/2026

😃 Most 20kW systems struggle with a thermal contradiction: the resonator demands extreme stability while the cutting head needs active heat rejection. A single cooling circuit forces a compromise. The TEYU fiber laser chiller CWFL-20000 solves this with two independent cooling channels. One zone maintains tight stability for the laser source. The other adjusts to protect the optics during piercing or full load. This separation prevents thermal interference, reduces condensation risks, and preserves beam quality across shift long operation. For fabricators running high-volume plate processing, the result is repeatable cut-edge consistency and fewer maintenance intervals. True 20kW laser performance requires a reliable .

For more about the TEYU chiller CWFL-20000, please visit https://www.teyuchiller.com/high-performance-industrial-cooling-system-cwfl20000.html.🌐

20/04/2026

💡😃 The key to long-term precision in isn't just about the power of the spindle; it’s about the stability of the thermal management supporting it. At the heart of many CNC machine tools and high-speed spindles, the TEYU CW-3000 series has long been a trusted partner for its passive cooling efficiency and rugged build.

While the classic version remains a staple in many CNC workshops, we are excited to highlight a thoughtful evolution: the chiller CW-3000 with a visible water level indicator.

🆕 This new version focuses on "User-friendly Design" without compromising the "Same Reliability" you’ve come to expect. For operators managing CNC spindles or light-duty engraving equipment, water levels are critical. The new integrated gauge allows users to quickly monitor coolant levels at a glance, ensuring easy refilling to the optimal range and preventing potential downtime or overheating caused by insufficient coolant. It is a small detail that makes a difference in daily operational safety and maintenance convenience.

Beyond the new design, the core of the chiller CW-3000 remains built on global standards. It is fully compliant with CE, RoHS, and REACH certifications, reflecting our commitment to environmental responsibility and international safety protocols. With its compact footprint, intelligent protections, and radiating capacity of 50W/℃, it continues to offer a cost-effective, energy-efficient solution for heat dissipation. ❄

Whether you are upgrading your current CNC setup or integrating a new spindle system, the machine tool chiller CW-3000 provides the transparency you need to keep your production running smoothly.

For more about TEYU cooling solutions, please visit www.teyuchiller.com🌐

17/04/2026

💥 What a rewarding week at .

It was a great opportunity for us to engage with global manufacturers, exchange practical insights, and showcase how precise temperature control supports stable, high-performance CNC machinetools and laser processing.❄

😄We sincerely appreciate every visitor and industry peer who stopped by our booth to connect and share perspectives. Your interest and conversations made this event truly meaningful. We’re already looking forward to the next station in Europe.

For more about TEYU Chiller, please visit www.teyuchiller.com 👈

16/04/2026

❄ Day 4 at 2026 is underway.

Notably, many exhibitors here are using TEYU water to cool their demonstration equipment, such as laser cutting machines, laser welding machines, laser marking machines, CNC routers, ensuring reliable operation throughout the show.✔️

If you're at SIMTOS over the coming days, we warmly invite you to stop by Booth 09G930. Let's explore how TEYU's reliable can support your production goals.

📅 April 13–17, 2026
📍 KINTEX, Hall 9 – Booth 09G930

For more about TEYU chillers that support 100+ industries, please visit www.teyuchiller.com 👈

15/04/2026

😀✨ In 3000-watt tube , the balance between processing capability and cost efficiency often defines laser equipment value. Medium to thick tube cutting demands stable laser output and precise focus control, both of which rely on consistent thermal conditions. The CWFL-3000 supports this by providing dual circuit cooling for the laser source and cutting head, helping maintain energy stability during extended operation. By controlling temperature within a narrow range, the CWFL-3000 reduces thermal variation that can affect cut quality and edge consistency. For manufacturers seeking reliable performance without overinvestment, this combination enables efficient throughput while preserving processing precision across diverse tube materials.

For more about TEYU fiber laser chiller CWFL-3000, please visit https://www.teyuchiller.com/recirculating-water-chiller-cwfl3000-for-3kw-fiber-laser-processing-machine.html.🌐

14/04/2026

😀 Day 2 at 2026 continues. 🔛

We made the most of today’s show by holding in-depth discussions with visitors on cooling solutions for CNC machining, laser processing, and high-precision applications. ✨

On display are a range of industrial , including compact rack-mounted ultrafast laser chiller units, all-in-one handheld laser welding chillers, and dual-circuit chillers designed for fiber laser systems. If you're at SIMTOS over the coming days, we warmly invite you to stop by Booth 09G930. Let's explore how TEYU's reliable chiller solutions can support your production goals.

📅 April 13–17, 2026
📍 KINTEX, Hall 9 – Booth 09G930

For more about TEYU cooling solutions that support 100+ industries, please visit www.teyuchiller.com.🌐

Address

No. 50, Zhongchuang Road, Zhongcun Town, Panyu District
Guangzhou
511495

Website

https://www.teyuchiller.com/

Alerts

Be the first to know and let us send you an email when TEYU S&A Chiller posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to TEYU S&A Chiller:

Shortcuts

Want your business to be the top-listed Engineering Company in Guangzhou?