Feiye Plastic Machines

Feiye Plastic Machines Helping you launch plastic bottle production(design,molds, machines & setup)
WhatsApp:+86 15888620201
www.feiyemachinery.cn www.feiyemachinery.com

15/06/2026

After years in the blow molding industry, I’ve learned one thing:

Most production problems start long before production begins.

The best projects are not built by buying the most expensive machine. They are built through proper bottle design, mold design, production planning, and equipment matching.

That’s where the real cost savings and efficiency gains come from.

HDPE

03/06/2026

One more successful testing run.

This fully automatic 2 - cavity wide mouth blow molding machine is designed for stable production of PET jars and containers.

Triple servo driven
Energy saving
Stable operation
Easy maintenance
Suitable for food & daily chemical packaging

From bottle design to stable production, we help customers build reliable packaging solutions. blowmolding

Weekend sourcing for a loyal client's new setup.Trust takes effort. 💪
31/05/2026

Weekend sourcing for a loyal client's new setup.
Trust takes effort. 💪

4 years ago, a client needed a blow molding machine:· 500ml to 2L bottles· Fully automatic· Must fit his existing 2CAV m...
28/05/2026

4 years ago, a client needed a blow molding machine:·
500ml to 2L bottles·
Fully automatic·
Must fit his existing 2CAV mold

We delivered:
🔧 Customized center distance
– old & new molds work
🔄 Interchangeable single/twin die head
– one machine, multiple products
⚙️ Single/dual station switch – capacity on demand

Full transparency: weekly photos/videos. Pre-shipment trial run, parameters saved, samples approved. Plug & produce upon arrival.

Result: 4+ years of 24/7 running, zero major issues.He later bought PET blow molder, robot, etc. Still highly satisfied.
That‘s what “turnkey solution” really means.

17/05/2026

From bottle design to final production, this is one of the blow molding projects I personally followed from start to finish.

The project included machine configuration, mold coordination, installation, and commissioning support.The final fully automatic production line is now running stably at the customer factory for years.

In blow molding projects, stable production depends not only on the machine itself, but also on proper matching of product design, mold structure, and production planning.

Many factories think bottle problems mean mold problems.Recently, a client using their own blow molding machine reported...
13/05/2026

Many factories think bottle problems mean mold problems.

Recently, a client using their own blow molding machine reported neck deformation and uneven bottom on a 20L drum, requesting mold modification.

After checking their machine setup, we found the real issues were incorrect cooling water connection and wrong machine parameters — not the mold.

Without proper technical support, factories often waste material, time, and production capacity.

For 18 years, we’ve focused on complete bottle production solutions:
✔ Machine
✔ Mold
✔ Process setup

24/7 technical support makes the real difference.

I helped a client reduce raw material cost by 25%.Four years ago, I designed two PET production lines for a European cli...
11/05/2026

I helped a client reduce raw material cost by 25%.

Four years ago, I designed two PET production lines for a European client — including machine selection, asdistant machines, 10 mold sets, and complete line planning.

By optimizing preform selection and bottle structure, we reduced a 4L bottle from 120g to 90g while maintaining stable production.

Today, both lines are still running well after 4 years, and we are now discussing a new project together.

Because real success is not just about machines — but long-term stable and profitable production.






The shipment was originally ready to go.Today, I completed the balance payment earlier to secure everything in productio...
09/05/2026

The shipment was originally ready to go.

Today, I completed the balance payment earlier to secure everything in production.

But the client has just added several more machines, so we are now coordinating with the factory to adjust production and ship everything together.

In real projects,
the important part is not only closing the deal —
it’s making sure the whole project runs smoothly.

PET / HDPE Packaging Solutions

08/05/2026

A good production line is not just about buying machines.

4 years ago, I helped a European client build two PET bottle production lines from zero.

One key improvement:
we reduced a 4L bottle from 120g to 90g while keeping strength and stable production.

This helped save around 25% raw material cost over the years.

Today, the lines are still running stable, and we’re discussing a new project together.

Stable production and long-term profit always matter more than short-term solutions.








04/05/2026

Still trimming 20L containers manually?

This line runs fully automatic
:�✓ Auto deflashing
�✓ High efficiency
�✓ Stable output

�In real production, automation is not about “looking advanced” — it’s about saving labor and avoiding inconsistency
�If you’re working on 20L jerry can production, I can help optimize your setup.





Address

Huangyantang
318020

Telephone

+8615888620201

Website

Alerts

Be the first to know and let us send you an email when Feiye Plastic Machines posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Feiye Plastic Machines:

Shortcuts

Share