Axiom Linear Motion

Website

Axiom Linear Motion Manufacturer of linear motion components for industrial machinery and automation. Linear guides, shafts, SBR systems, ball screws and bearings.

02/10/2026

Step inside the assembly process for linear guide blocks. See the work behind a component that becomes part of a machine axis.

Send your guide model or drawing to discuss the required configuration.

A linear shaft may look simple. The working interface is not.In a shaft-and-linear-bearing system, the rolling elements ...
29/09/2026

A linear shaft may look simple. The working interface is not.

In a shaft-and-linear-bearing system, the rolling elements inside the bearing run directly against the shaft surface.

That makes the surface of the shaft part of the motion interface, not simply a piece of round steel.

The mating linear bearing contains a cage and rolling elements that contact this surface during movement.

This explains why surface condition, straightness and the relationship between shaft and bearing matter in practical linear guidance.

The shaft may be visually simple, but its surface is where the motion actually happens.

For more details about linear shafts and matching linear motion components, you can view the product information on our website.

Website: https://axiomchina.com/
Email: [email protected]

25/09/2026

Watch a gear rack take shape during tooth milling. A closer look at the machining behind the finished part.

Message us with your rack drawing and required quantity.

A ball screw and a linear guide may work on the same axis, but they are not doing the same job.The ball screw converts r...
22/09/2026

A ball screw and a linear guide may work on the same axis, but they are not doing the same job.

The ball screw converts rotary motion into linear travel.

The linear guide supports and guides the moving structure along its intended path.

This distinction matters when looking at a complete machine axis.

A motor can rotate the screw and move the nut, but the worktable or carriage still needs a guiding structure to control its movement and support external loads.

That is why ball screws and linear guides often appear together in CNC machines and automation systems.

Instead of choosing each component in isolation, it makes more sense to look at how the drive and guidance systems work together.

To understand how these components can be matched in a motion system, you can review our product range or share the basic application details for discussion.

Website: https://axiomchina.com/
Email: [email protected]

22/09/2026

Need linear guide blocks for your machines or replacement parts?

Here’s a closer look at our steel-retainer guide block assembly process on the workshop floor.

For machine builders, automation equipment companies and linear motion parts distributors, getting the right block starts with the right model and application.

Send us your:
• Guide block model
• Rail model or size
• Required quantity
• Product photo, if available

We’ll help you check the matching option for your application.

20/09/2026

A batch of finished gear racks is heading out. Take a look at the products behind the next machine build.

Send your required module, rack length and quantity to discuss an order.

Two ball screws can look very similar and still behave differently inside a machine.Diameter is only one part of the spe...
15/09/2026

Two ball screws can look very similar and still behave differently inside a machine.

Diameter is only one part of the specification.

A ball screw data table may also include lead, ball diameter, number of circuits, dynamic load rating, static load rating and stiffness.

Each describes a different part of the mechanical relationship between the screw, nut, load and required travel.

For example, lead is directly connected to how much linear travel is produced from screw rotation, while load ratings and stiffness describe different aspects of how the assembly operates under load.

This is why selecting a ball screw from diameter alone leaves too much of the application unanswered.

Start with the axis requirement, then read the specification table.

For more ball screw model information or product details, you can visit our website and review the available series.

Website: https://axiomchina.com/
Email: [email protected]

There is no single linear guide for every machine.That becomes clear when you look at different guide configurations, su...
08/09/2026

There is no single linear guide for every machine.

That becomes clear when you look at different guide configurations, such as high-assembly, low-assembly, heavy-load and miniature guide series.

They all belong to the linear guide category, but a machine designer may be working with very different installation space, carriage dimensions, load conditions and axis structures.

So asking only for “a linear guide” is usually too broad.

A better conversation starts with the machine itself:

How much installation space is available?
How is the moving structure arranged?
What loads will act on the blocks?
How will the rails be mounted?

The product series comes after the application conditions.

If you are comparing linear guide structures for a machine or automation project, our product pages can help you review available series and basic model information.

Website: https://axiomchina.com/
Email: [email protected]

A linear guide is not selected by load capacity alone.Take a closer look at a linear guide specification table and you w...
01/09/2026

A linear guide is not selected by load capacity alone.

Take a closer look at a linear guide specification table and you will usually find more than rail size and load rating.

For example, linear guide data often separates dynamic load, static load and allowable static moment.

Why does moment matter?

Because the force on a moving table or carriage does not always act perfectly through the center of the block. The position of the load and the way the moving structure is arranged can create different moments on the guide block.

That is why linear guide selection should start with the complete mechanical layout, not only with “How much weight can it carry?”

The rail size matters.
The block configuration matters.
The way the load acts on the system matters too.

For more product details or model information, you can check the linear guide section on our website or share your application requirements with us.

Website: https://axiomchina.com/
Email: [email protected]

Address

No. 218, Street-front Commercial Building, North Side Of Shun'ao Jiayuan South Area, Shunhua Road Subdistrict, Jinan High-tech Zone
Jinan
250101

Website

Alerts

Be the first to know and let us send you an email when Axiom Linear Motion posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category