SFC Machinery Co., Ltd in Shanghai

SFC Machinery Co., Ltd in Shanghai Turning wet sludge into manageable cake.

SFC provides screw press, belt press, sludge dryer and complete sludge reduction solutions for municipal and industrial wastewater projects.

Prepare Your Project Data Before Visiting SFC at INDO WATER 2026Different sludge types require different treatment route...
07/08/2026

Prepare Your Project Data Before Visiting SFC at INDO WATER 2026
Different sludge types require different treatment routes.
To help us recommend the most suitable sludge thickening, dewatering, deep dewatering, drying, or resource recovery solution, we welcome customers to prepare basic project information before visiting SFC at Booth C3-50a.
Before the exhibition, you may prepare:
✅ Sludge source
Municipal wastewater, palm oil mill, food processing, paper mill, chemical plant, etc.
✅ Sludge flow rate
Daily or hourly sludge volume to be treated
✅ Inlet solid content
Moisture content or solid concentration before treatment
✅ Target outlet moisture
Required cake moisture or dryness after treatment
✅ Existing treatment process
Current thickening, dewatering, drying, or disposal method
✅ Site conditions
Available installation space, power supply, automation requirements, and operation schedule
With real project data, SFC can help you select the right equipment combination and design a more practical sludge reduction route.
Meet us at INDO WATER 2026:
📅 11–13 August 2026
📍 Jakarta International Expo Kemayoran, Jakarta, Indonesia
📌 Booth C3-50a
Bring your project data. Let’s find the right sludge treatment solution together.
WhatsApp: +86 180 0182 6605
Mail: [email protected]
🌐 www.sfceco.com

What Can You Discuss with SFC at INDO WATER 2026?Next week, SFC will meet customers and partners at INDO WATER 2026 EXPO...
06/08/2026

What Can You Discuss with SFC at INDO WATER 2026?
Next week, SFC will meet customers and partners at INDO WATER 2026 EXPO & FORUM in Jakarta, Indonesia.
At Booth C3-50a, we will introduce SFC Sludge Reduction Island™, an integrated sludge treatment route from sludge thickening to low-temperature drying and resource recovery.
Our product discussion will cover:
✅ STC Sludge Thickening
✅ SRD Wear-free Screw Press Dewatering
✅ HPD High-pressure Sludge Dewatering
✅ LTD Low-temperature Sludge Drying
✅ Resource Recovery
Whether your project is for municipal wastewater, palm oil mills, food processing, paper mills, or other industrial wastewater treatment, SFC can help you evaluate suitable equipment combinations based on your real project conditions.
📅 11–13 August 2026
📍 Jakarta International Expo Kemayoran, Jakarta, Indonesia
📌 Booth C3-50a
Let’s discuss your sludge treatment project face to face.
WhatsApp: +86 180 0182 6605
Mail: [email protected]
🌐 www.sfceco.com

Chemical Plant Sludge? Match the Right Dewatering UnitDoes your chemical plant still send out sludge that is too wet to ...
05/08/2026

Chemical Plant Sludge? Match the Right Dewatering Unit

Does your chemical plant still send out sludge that is too wet to handle cheaply?

After primary mechanical dewatering, many industrial sites face one extra challenge: sludge still holds enough moisture to make transport and disposal expensive. In chemical plant applications, the next step is often a deep dewatering stage—another controlled pass that lowers the remaining moisture before drying, incineration, or final disposal.

Shanghai Fuchan Machinery Technology Co., Ltd. (SFC Machinery) is a Shanghai-based manufacturer of sludge treatment equipment, established in 2007, focused on sludge thickening, dewatering, drying, and chemical dosing systems. For projects that need a second dewatering stage, SFC offers the High-Pressure Belt Deep Sludge Dewatering Machine, model SD Series (SFC-SD05 / SFC-SD10 / SFC-SD15 / SFC-SD20 / SFC-SD25). This machine is used in chemical plant applications to reduce sludge moisture.

The SD Series is a secondary deep dewatering system. Its inlet consistency is listed as S.S. 15–20%, and the applicable industries include chemical plants, municipal wastewater treatment plants, sludge deep treatment, sludge drying pretreatment, and sludge incineration pretreatment. The system is built for continuous automatic operation and typically includes a sludge mixer, modifier dosing system, sludge distribution system, high-pressure belt press, conveyor, and control cabinet. The machine is made with SS304 materials.

How to evaluate fit for your project:
1. Confirm your sludge has already gone through primary dewatering and still needs further moisture reduction before drying, incineration, or disposal.
2. Check feed solids. The SD Series is listed for an inlet consistency of S.S. 15–20%.
3. Plan for sludge testing. Conditioning chemicals and project-specific sludge testing are recommended because sludge characteristics vary by plant.

SFC also supports customization based on sludge characteristics and treatment capacity. Equipment type and model selection, processing capacity, equipment dimensions, PLC control configuration, power configuration, and modular design options can be adjusted to match project requirements. Export markets include Southeast Asia, Russia, South America, and the Middle East.

The practical benefit of deep dewatering is straightforward: lower final moisture content means reduced disposal volume and lower transportation expenses, which supports sludge drying or incineration as the next step.

What moisture level does your current dewatering line leave behind? Share your project conditions in the comments—real sludge data is a useful starting point for matching the right equipment.

SFC Machinery
www.sfceco.com
[email protected]

See You Next Week at INDO WATER 2026!SFC will be at INDO WATER 2026 EXPO & FORUM in Jakarta, Indonesia from 11–13 August...
05/08/2026

See You Next Week at INDO WATER 2026!
SFC will be at INDO WATER 2026 EXPO & FORUM in Jakarta, Indonesia from 11–13 August 2026.
Visit us at Booth C3 50a to explore SFC Sludge Reduction Island™ solutions, including mechanical reduction, deep dewatering, low-temperature drying, and resource recovery.
We look forward to discussing sludge dewatering and wastewater treatment solutions for your projects in Indonesia and Southeast Asia.
📅 11–13 August 2026
📍 Jakarta International Expo Kemayoran, Jakarta, Indonesia
📌 Booth C3 50a
WhatsApp: +86 180 0182 6605
Mail: [email protected]
🌐 www.sfceco.com

50,000 hours vs. 10,000 hours—which screw press wears out first?You’re running a sludge dewatering line, and every few m...
30/07/2026

50,000 hours vs. 10,000 hours—which screw press wears out first?

You’re running a sludge dewatering line, and every few months you’re down for shaft repairs. Sound familiar?

If you handle oily, sticky, or high‑inorganic sludge, standard multi‑disc screw presses can experience severe screw shaft wear after just 10,000 hours of operation. That means more downtime, more spare parts, and higher maintenance costs.

Here’s where the design makes a real difference. The wear‑free screw press from Shanghai Fuchan Machinery eliminates shaft wear entirely. Instead of direct friction between the screw and the rings, the advanced design keeps the shaft untouched. After 50,000 hours of operation, the screw shaft shows zero wear.

What does that mean for your bottom line?
- Maintenance expenses (shaft, rings, spare parts, repair) drop by about 30%.
- The maintenance cycle extends roughly 300%—less frequent inspections and replacements.
- Energy consumption decreases because frictional losses are eliminated.

So next time you’re evaluating sludge dewatering equipment, ask yourself: do I want a machine that starts wearing out at 10,000 hours, or one that stays like new for 50,000 hours?

How many hours does your current screw press run before major repairs? Drop your answer in the comments.

Sludge Dewatering Solutions for Indonesia and Southeast AsiaFrom palm oil mills and food processing plants to municipal ...
29/07/2026

Sludge Dewatering Solutions for Indonesia and Southeast Asia
From palm oil mills and food processing plants to municipal wastewater treatment plants and paper mills, different sludge types require different treatment solutions.
Fuchan supports equipment selection based on real project data, covering sludge thickening, dewatering, deep dewatering, drying, and wastewater treatment support systems.
We help customers reduce sludge volume, improve treatment efficiency, and build more stable wastewater treatment operations.
WhatsApp: +180 0182 6605
Mail: [email protected]
🌐 www.sfceco.com

Sludge Dewatering Equipment That Has Run for 10+ Years? Real CasesWhen you're evaluating sludge dewatering equipment, on...
24/07/2026

Sludge Dewatering Equipment That Has Run for 10+ Years? Real Cases

When you're evaluating sludge dewatering equipment, one question always comes up: how long will it really last under daily operation?

Here's what real-world use looks like.

Shanghai Fuchan Machinery Technology Co., Ltd. (SFC Machinery) is a China-based environmental equipment manufacturer that has been designing and building sludge treatment systems since 2007. Over the years, their machines have been handling everything from vegetable oil processing sludge to pharmaceutical wastewater — and they keep running.

Take a screw press dewatering machine (DL Series) used by a vegetable oil plant in China. Inlet sludge at 97% moisture. After pressing? Down to 77%. The machine has been operating for 8 years, reducing sludge volume by up to 98% with fully automated, low-maintenance operation.

Or look at an automotive parts manufacturer using a low-temperature sludge dryer (SFC-TR Series). They feed sludge at 75% moisture, and the dryer brings it below 25% — removing over 700 kg of water per metric ton. That's more than a 70% volume cut. The system has run 5 years with zero wearing parts.

Even a municipal sewage plant in China trusted a GDY Series belt thickening and dewatering machine to process excess sludge from 99.2% down to below 80% moisture. Five years of continuous, unattended operation later, it still delivers consistent cake dryness with minimal maintenance.

These aren't lab tests. These are real installations, in real plants, year after year.

SFC Machinery offers a full range: screw presses, belt presses, rotary drum thickeners, belt dryers, and deep dewatering systems. Each model is built with SS304, ISO 9001 certified, and backed by OEM/ODM customization.

If you're looking at sludge dewatering equipment right now — what's the main challenge in your plant? High moisture? Energy cost? Maintenance downtime? Drop a comment below, we'd love to hear how your current setup compares.

📩 Want to discuss a machine for your specific sludge type? Contact us at [email protected] or WhatsApp +86 138-1673-2007.

Screw press sludge dewatering machines are widely used in municipal and industrial wastewater treatment projects.Designe...
21/07/2026

Screw press sludge dewatering machines are widely used in municipal and industrial wastewater treatment projects.
Designed for continuous operation, compact installation, and automatic sludge dewatering, they are an ideal choice for plants that require stable performance, easy maintenance, and efficient sludge volume reduction.
SFC SRD Wear-free Multi-disc Screw Press Sludge Dewatering Machine helps improve sludge treatment efficiency while supporting lower operating and disposal costs.
Looking for a reliable sludge dewatering solution?
Contact Fuchan today.
WhatsApp: +86 138 1673 2007
Mail: [email protected]
🌐 www.sfceco.com

See You in Jakarta! SFC Will Attend the Water Treatment Exhibition in IndonesiaWe are excited to announce that SFC will ...
17/07/2026

See You in Jakarta! SFC Will Attend the Water Treatment Exhibition in Indonesia
We are excited to announce that SFC will be exhibiting at the upcoming water treatment exhibition in Jakarta, Indonesia from August 11–13.
As a sludge treatment and wastewater equipment manufacturer, SFC provides integrated solutions covering sludge thickening, dewatering, deep dewatering, drying, conveying & storage, polymer preparation, DAF, lamella clarifiers, solid-liquid separation, and aeration systems.
With years of engineering experience and global project support, we are committed to helping municipal and industrial wastewater treatment plants reduce sludge volume, improve treatment efficiency, lower operating costs, and achieve more stable system performance.

📍 Exhibition Venue: JIEXPO KEMAYORAN, JAKARTA, INDONESIA
📅 Date: August 11–13
📌 Booth No.: C3-50a

We warmly welcome partners, customers, and industry professionals to visit SFC at Booth C3-50a. Let’s discuss efficient, customized, and cost-effective wastewater and sludge treatment solutions for your project.

Contact Fuchan to schedule a meeting in advance:
WhatsApp: +86 138 1673 2007
Mail: [email protected]
🌐 www.sfceco.com

Compact layout. Continuous operation. Automatic sludge dewatering.SFC screw press sludge dewatering machines are widely ...
16/07/2026

Compact layout. Continuous operation. Automatic sludge dewatering.
SFC screw press sludge dewatering machines are widely used in municipal and industrial wastewater treatment projects, especially for small and medium-sized sludge dewatering applications requiring stable operation and easy maintenance.
Suitable for municipal wastewater, food processing, paper making, and industrial sludge treatment.
WhatsApp: +86 138 1673 2007
Mail: [email protected]
🌐 www.sfceco.com

Address

中国上海
Shanghai
201206

Opening Hours

Monday 09:00 - 17:00
Tuesday 09:00 - 17:00
Wednesday 09:00 - 17:00
Thursday 09:00 - 17:00
Friday 09:00 - 17:00

Website

,

Alerts

Be the first to know and let us send you an email when SFC Machinery Co., Ltd in Shanghai posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category