Jiangxi Guangxin New Materials Co., Ltd.

21/09/2016

Jiangxi Guangxin New Materials Co. LTD.

We supply:
• Silver-copper alloy bar
• Silver-copper strips
• Commutator segment
• Oxygen-free silver copper Profiled bar
• High purity oxygen-free Copper strip
• High purity oxygen-free Copper rod
Contact us at https://www.facebook.com/jiangxiguangxin/

16/08/2016

we are on Twitter as well please do follow us on https://twitter.com/jiangxiguangxin

15/08/2016

high purity -free
C10100 series product, specification Φ10mm～Φ 80mm
contact us at https://www.facebook.com/jiangxiguangxin/

Jiangxi Guangxin has been a private joint-stock enterprise specialized in copper processing and prod

11/08/2016

high purity -free

C10100, C10200 series
product, the width is less
than 160mm and thickness is
within 0.1~2mm
Contact on my email: [email protected]

08/08/2016

-free

C10400, C10500, C10700,
with width of 10~150mm and
thickness of 0.1~2mm

Contact on my email: [email protected]

03/08/2016

segment:

Product shape based on
customer’s drawing, -
and free
C10200, C10500,
C10700, C10400

Contact me at [email protected]

02/08/2016

-

C10400, C10500, C10700
series product, the width is
less than 160mm, thickness is
less than 0.1~2.0mm

contact: [email protected]

01/08/2016

Large width-to thickness
ratio shaped
- bar
and
segment

1.6T/50T/600T
MOQ: 500kg

contact: [email protected]

29/07/2016

Pennies are Worth More Than 1 Cent

A very interesting fact: All pennies before 1982 (and some produced in 1982) are primarily composed of . All pennies after 1982 (and some produced in 1982) are only coated in . The reason for this is is worth more than the face value of the penny itself. The current value of a pre-1982 penny is over 1 cent. In fact, each pre-1982 penny is worth about 2.9 cents (simply amazing)!

21/07/2016

Jiangxi Guangxin has been a private joint-stock enterprise specialized in copper processing and prod

21/07/2016

Bus Bar:

"Busbar systems" refers to conductors that take the form of a bar or bars of . The bars may be exposed or enclosed. The system may have one or more joints to assure proper length and configuration and one or more take-off points connected to end-use equipment.
For energy-efficiency considerations, the design of the system should be based on a 30C rise above ambient, or less. Temperature rises above 65C are not recommended and are not energy-efficient.

20/07/2016

Motor is an motor and it most commonly used in an electrical device for easy to drive the instruments, steel rolling mills, electric cranes, and robotic manipulators due to precise, wide, simple, and continuous control characteristics. To control the speed of low power DC Motor rheostat armature control method were used. The basic parts of the DC motor are- , ( ), , , , and . In the geometry of , contacts, and are arranged in such a manner so that when power is applied then polarities of the energized and the magnets are misaligned and the will start to rotate until it is almost aligned with the stator's field magnets. When the rotor reaches to alignment, the brushes move to next commutator contacts, and energize the next winding.
https://www.facebook.com/jiangxiguangxin/