Hammam Industries & Co. صناعات همام وشركاه

Hammam Industries & Co. صناعات همام وشركاه Hammam Industries & Co. A Leader In Manufacturing HVAC Industrial Equipment & Industrial fans

is located in Giza, Egypt, with a large capacity to serve all surrounding regional areas & meet ongoing demand. provides expertise knowledge & equipment of HVAC product & service For Most Air & Climate Control Solutions covering projects from the Design phase to operations and maintenance. Industrial fans, cooling towers, dust collectors, industrial air curtains,

Hammam Self-contained ready to install and use Air Shower Chamber or Tunnel type DOSH are designed to reduce contaminant...
19/04/2026

Hammam Self-contained ready to install and use Air Shower Chamber or Tunnel type DOSH are designed to reduce contaminants carried by personnel or by products entering a controlled clean areas and rooms.
DOSH Air Shower is suitable for a wide range of clean space applications and classes. CLASS 100 filtration air supply flow is standard, other classes and special application air showers are possible upon specification.
Before entering the clean rooms, and sterile room personnel or material packages on cart, undergo an air rinse by Pressurized air streams from nozzles at high velocity. which ensure scrubbing action necessary to remove particulate matter.
The air flow covers the entire chamber and directs the particles downward through wall grilles into the filter where all particles as small as 0.3 microns, depending on type of filter used, are removed with 99.95% efficiency

وحدات الدش الهوائى من صناعات همام تورد قطعة واحدة قائمة بذاتها جاهزة للتشغيل بعد توصيل الكهرباء إليها . وتوفر صناعات همام وحدات بتصاميم ومواصفات ودرجة كفاءة حسب طلب العميل ومنها غرف ممرات دخول الى الغرف العقيمة سواء للافراد أو لخامات التصنيع ، حيث يتم نفض الملوثات العالقة بالجسم بواسطة تعريضها لتيارات هواء قوية فى إتجاهات مدروسة بدقة لتكون قادرة على إزالة جزيئات الأتربة العالقة متناهية الصغر بكفاءة فلترة تصل إلى %99.95

كل عام وانتم بخير بمناسبة أعياد الربيع 🌹🌷🌺🌻
13/04/2026

كل عام وانتم بخير
بمناسبة أعياد الربيع 🌹🌷🌺🌻

مراوح همام الطاردة المركزية من طرازHHD  مصممة خصيصاً  للعمل في الظروف الشاقة داخل التطبيقات الصناعية التي تتطلب تحريك كم...
29/03/2026

مراوح همام الطاردة المركزية من طرازHHD مصممة خصيصاً للعمل في الظروف الشاقة داخل التطبيقات الصناعية التي تتطلب تحريك كميات محدودة من الهواء أو الغازات بضغوط مرتفعة ، وتتميز هذه المراوح بعجلة ريش مصنوعة من صفائح حديدية سميكة، ما يمنحها قدرة عالية على تحمل الضغوط الكبيرة.
كما يعتمد هذا الطراز على ريش ذات انحناء خلفي ، وهي ميزة تضمن الحد من زيادة الأحمال، وبالتالي حماية الموتور من تجاوز قدرته التشغيلية ، مع تحقيق كفاءة أعلى للمروحة وتقليل مستوى الضوضاء وإطالة العمر التشغيلي لكلاً من المروحة والموتور.
يتوفر هذا الطراز من المراوح HHD التى تدار مباشرة على عمود الموتور بقدرات من 1200 الى 7000 متر مكعب / ساعة بضغوط تتراوح بين 3200 حتى 9300 باسكال. وتناسب تحريك غازات بدرجة حرارة حتى 120 درجة مئوية.
وتوفر صناعات همام أيضاً هذه المراوح بسعات وضغوط مختلفة لتناسب طبيعة وظروف كل إستخدام وبالمواصفات المقررة من قبل العميل ، بالاضافة إلى توفر مراوح الضغط العالى التى تدار بواسطة سير ناقل للحركة.

Hammam High Pressure Centrifugal Fan type “HHD” direct drive is designed for Heavy duty work in an industrial application when high ratio between developed pressure and flow rate is required.
This series of Hammam fans features none-overloading fully welded steel, backward curved impeller assuring high efficiency performance at low noise and longer life, and are for the conveyance of clean of light dusty air.
The HHD direct drive fan is available for moving flow volume from 1200 m3/hr. to 7000 m3/hr. with static pressure from 3200 to 9300 Pascal and is suitable for handling gases with temperature up to 120°C.
Fan Motor is TEFC, Three-phase 400V.50Hz. Class F, IP55 protection.
For other capacity and pressure a much wider range of high pressure fans for meeting the exact client performance and specification, are available from Hammam including the Belt Driven Fans.

فى تاريخ 16 فبراير 2026 استلمت صناعات همام تحديث شهادة أمكا العالمية لمنتجاتها من المراوح المحورية طراز ADT "ماركة همام"...
02/03/2026

فى تاريخ 16 فبراير 2026 استلمت صناعات همام تحديث شهادة أمكا العالمية لمنتجاتها من المراوح المحورية طراز ADT "ماركة همام" لتشمل التصريح بمنح المقاس الاكبر من هذا الطراز مروحة قطر 1400مم
ليحمل شهادة AMCA Certified Rating Seal ، بعد إجتيازه الاختبارات بمعامل أمكا، لينضم الى شهادة أمكا لهذا الطراز والتى اًصبحت تغطى 12 مقاس ابتداء من مروحة قطر 315مم وحتى قطر 1400مم.

22/02/2026

HAMMAM Products

Hammam "API " Roof panel axial exhaust fans The right choice ✅for extracting large volume of air💨at lower cost💰مراوح API...
27/01/2026

Hammam "API " Roof panel axial exhaust fans
The right choice ✅for extracting large volume of air💨at lower cost💰

مراوح API من صناعات همام ، هى الاختيار الأمثل للأسقف المعدنية (الجمالونات) لسحب كميات هواء كبيرة بأقل تكلفة

تحية تقدير واعتزاز لرجال الشرطة ، حماة الأمن وسند الوطن كل عام وأنتم درع الأمان لمصر  🇪🇬💪 🇪🇬
25/01/2026

تحية تقدير واعتزاز لرجال الشرطة ، حماة الأمن وسند الوطن
كل عام وأنتم درع الأمان لمصر 🇪🇬💪 🇪🇬

إلتزامنا بمعايير الجودة الصارمة ✅ ليس خياراً بل هو نهج راسخ نطبقه فى كل مرحلة من مراحل التصنيع  📈📊لأننا نؤمن أن الجودة ا...
14/01/2026

إلتزامنا بمعايير الجودة الصارمة ✅ ليس خياراً بل هو نهج راسخ نطبقه فى كل مرحلة من مراحل التصنيع 📈📊لأننا نؤمن أن الجودة الحقيقية تنبع من العناية بالتفاصيل ✍️ لذلك نحرص على مراقبة كل خطوة 🎯 لضمان منتج يليق بعملائنا الكرام ويلبى احتياجاتكم وتوقعاتكم 🤝

31/12/2025

Happy New Year 2026

مراوح سحب أدخنة الحرائق 🔥💨ماركة همام من طراز BIFU إجتازات بنجاح اختبارات الحريق طبقا بمعامل المركز القومى لبحوث الأسكان ...
11/12/2025

مراوح سحب أدخنة الحرائق 🔥💨ماركة همام من طراز BIFU إجتازات بنجاح اختبارات الحريق طبقا بمعامل المركز القومى لبحوث الأسكان و البناء HBRC وكذلك بمعامل MCL كلية الهندسة جامعة القاهرة وحاصله على شهادة مطابقه من الهيئة المصرية للمواصفات والجودة EOS 🇪🇬لصالح شركة صناعات همام وشركاه.
وذلك طبقا للمواصفة الأوروبية EN 12101-3:2015 الخاصة بنظم التحكم فى الادخنة والحرارة

Hammam range of BIFU,🔥💨 is Tested by Housing & Building National Research Center HBRC, as well as tested by MCL Faculty of Engineering Cairo University, and Certified by the Egyptian Organization for Standardization & Quality EOS, 🇪🇬 according to the European standard BS EN 12101-3:2015 "Smoke and heat control Systems

Why Fan Performance Drops After Installation ?And How to Avoid It ?Most fan failures in factories are not manufacturing ...
07/12/2025

Why Fan Performance Drops After Installation ?
And How to Avoid It ?
Most fan failures in factories are not manufacturing defects…
They’re installation mistakes.
In many site visits, I’ve seen perfectly selected fans lose 30–40% of their performance simply because the system was installed without respecting basic aerodynamic principles.
The most common causes are:
Sharp elbows on the fan inlet
Dampers positioned too close to the fan
Sudden duct size transitions
Poor inlet conditions causing turbulence
High system effect due to improper layout
When airflow is choked by turbulence, the fan curve you selected in the office becomes irrelevant on site.
Lesson for young engineers:
Design the ductwork and inlet conditions with the same attention you give to selecting the fan. The best fan cannot fix a bad system.

🎯 What installation issue have you seen most often lately?

Address

6 October City
6 October City

Opening Hours

Monday 7:30am - 4:30pm
Tuesday 7:30am - 4:30pm
Wednesday 7:30am - 4:30pm
Thursday 7:30am - 4:30pm
Sunday 7:30am - 4:30pm

Telephone

+20238201930

Alerts

Be the first to know and let us send you an email when Hammam Industries & Co. صناعات همام وشركاه posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hammam Industries & Co. صناعات همام وشركاه:

Share