Digital Electronics PLC

Digital Electronics PLC Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Digital Electronics PLC, Robotics company, 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ. ቁ 103ለ, Addis Ababa.

📱0914839754 📱0703839754
Telegram https://t.me/digitalelectronics_tech
Web https://digitalelectronics.tech
Youtube; http://www.youtube.com/

🔷Ultrasonic sensor♦️Operating Voltage: 5V DC.♦️Operating Current: 15mA ♦️Ultrasonic Frequency: 40 kHz.♦️Measuring Range:...
11/03/2026

🔷Ultrasonic sensor

♦️Operating Voltage: 5V DC.
♦️Operating Current: 15mA
♦️Ultrasonic Frequency: 40 kHz.
♦️Measuring Range: 2 cm to 400 cm
♦️Accuracy/Resolution: ±3 mm accuracy with a 0.3 cm resolution.
♦️Measuring Angle: Effective angle of

📌12-24 v dc motor♦️Voltage: 24V DC♦️Power Output: 30W♦️Rated Speed - 2400 RPM ♦️Rated Current: Approx. 2.2A ♦️Torque: Hi...
10/03/2026

📌12-24 v dc motor

♦️Voltage: 24V DC
♦️Power Output: 30W
♦️Rated Speed - 2400 RPM
♦️Rated Current: Approx. 2.2A
♦️Torque: High torque output
👉 Telegram (https://t.me/digitalelectronics_tech)
👉 Instagram (https://www.instagram.com/digitalelectronics_tech?igsh=MWNscGdqN3F1b3Z0bw%3D%3D&utm_source=qr)
👉 TikTok (https://www.tiktok.com/.tech)
👉 YouTube (http://www.youtube.com/)
👉E-commerce website (https://digitalelectronics.et/)

📌Price 2500
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

3.7 V RECHARGBLE LITHUIM BATTERY♦️Nominal Voltage: 3.7V - 3.8V♦️Maximum Charge Voltage: 4.20V ± 0.05V♦️Discharge Cut-off...
03/03/2026

3.7 V RECHARGBLE LITHUIM BATTERY
♦️Nominal Voltage: 3.7V - 3.8V
♦️Maximum Charge Voltage: 4.20V ± 0.05V
♦️Discharge Cut-off Voltage: 2.75V - 3.0V
♦️Capacity: Varies widely 3800mAh
♦️Cycle Life: 300 - 500 cycles (typical)
👉 Telegram (https://t.me/digitalelectronics_tech)
👉 Instagram (https://www.instagram.com/digitalelectronics_tech?igsh=MWNscGdqN3F1b3Z0bw%3D%3D&utm_source=qr)
👉 TikTok (https://www.tiktok.com/.tech)
👉 YouTube (http://www.youtube.com/)
👉E-commerce website (https://digitalelectronics.et/)

📌Price 580
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

2MD860hs micro steper driver ♦️Input Voltage: 18-80 VAC or 24-110 VDC ...
28/02/2026

2MD860hs micro steper driver ♦️Input Voltage: 18-80 VAC or 24-110 VDC
♦️Output Current: 2.4A - 7.2A (Peak)
♦️Microstep Resolution: 400 - 51,200 steps/rev (16 selectable settings)
♦️Pulse Frequency: Up to 200kHz - 300kHz
♦️Control Mode: Pulse/Direction (PUL/DIR) or CW/CCW
♦️Motor Compatibility: 2-phase/4-phase hybrid stepping motors (4, 6, 8 wires)
♦️Cooling: Requires natural convection or forced air cooling.
♦️Dimensions: Approx. 151 x 97 x 52 mm.
👉 Telegram (https://t.me/digitalelectronics_tech)
👉 Instagram (https://www.instagram.com/digitalelectronics_tech?igsh=MWNscGdqN3F1b3Z0bw%3D%3D&utm_source=qr)
👉 TikTok (https://www.tiktok.com/.tech)
👉 YouTube (http://www.youtube.com/)
👉E-commerce website (https://digitalelectronics.et/)

📌Price 11000
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

📌Joystick Module♦️Dual Axis Joystick Module♦️Dimensions: 40 x 27 x 15 (LxWxH) mm♦️Weight: 10gm (without Hat)♦️2.54mm pin...
23/02/2026

📌Joystick Module

♦️Dual Axis Joystick Module
♦️Dimensions: 40 x 27 x 15 (LxWxH) mm
♦️Weight: 10gm (without Hat)
♦️2.54mm pin interface leads
♦️Operating Voltage: 5V
♦️Cross rocker as a two-way 10K resistor, with the rocker in a different direction
♦️With the help of this Joystick Module, you can measure position coordinates on the X and Y axis by moving the “hat”. It also contains a switch that is press-able by pushing the “hat”. It also contains a switch that is press-able by pushing the “hat” down

📌Price 750
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

📌Inductive proximity Sensor♦️Output Type: NPN (Normally Open or Normally Closed)♦️Supply Voltage: Typically 6-36V DC, wi...
16/02/2026

📌Inductive proximity Sensor

♦️Output Type: NPN (Normally Open or Normally Closed)
♦️Supply Voltage: Typically 6-36V DC, with some models supporting a wider range.
♦️Detection Distance: Varies by model, commonly ranging from a few millimeters to several centimeters (e.g., 1mm, 2mm, 4mm, 10mm).
♦️Output Current: Limited to a few hundred milliamps (e.g., 300mA).
♦️Response Frequency: Indicates how quickly the sensor can switch, usually in the range of 0.5kHz to 1kHz.
♦️Connection: Typically 3-wire, with connections for power, ground, and the output signal.

📌Price 2500
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

📌Single blade spiral milling cutter♦️Material: Solid Tungsten Steel/Carbide.♦️Coating: Typically Nano Blue Coating (incr...
12/02/2026

📌Single blade spiral milling cutter

♦️Material: Solid Tungsten Steel/Carbide.
♦️Coating: Typically Nano Blue Coating (increases hardness and wear resistance).
♦️Design: Single flute spiral design, often with a high rake angle for faster, smoother cutting and effective chip evacuation.

📌Price 1750
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

📌TRAFFIC LIGHT MODULE♦️The traffic light module is compact in size and easy to install.♦️It usually includes large LEDs,...
11/02/2026

📌TRAFFIC LIGHT MODULE

♦️The traffic light module is compact in size and easy to install.
♦️It usually includes large LEDs, typically 8mm in size, for better visibility.
♦️The LEDs are often active HIGH, meaning they are lit when a logic HIGH signal is applied to the module’s pins.
♦️Built-in current limiting resistors ensure that the LEDs receive the appropriate amount of current.
♦️The module is compatible with both 3.3V and 5V systems, making it versatile for different microcontroller platforms.
♦️Some modules can be connected to the PWM (Pulse Width Modulation) pin of a microcontroller to control the brightness of the LEDs.

📌Price 700
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

📌ብዙ ተማሪዎች እነዚን እቃዎች ይገዛሉ ነገርግን አተቃቀሙን አያቁበትም♦️እነዚን እቃዎች እና ሌሎችንም እኛጋ ከበቂ እገዛ ጋር ያገኛሉContact 📱0914-839754 ...
09/02/2026

📌ብዙ ተማሪዎች እነዚን እቃዎች ይገዛሉ ነገርግን አተቃቀሙን አያቁበትም

♦️እነዚን እቃዎች እና ሌሎችንም እኛጋ ከበቂ እገዛ ጋር ያገኛሉ

Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

Modules students buy but Don’t actually know how to use
09/02/2026

Modules students buy but Don’t actually know how to use

📌RAMPS 1.4 Shield – 3D Printer Control Board♦️Standard interfaces (as that of extruder)♦️Reserved GCI like I2C and RS232...
07/02/2026

📌RAMPS 1.4 Shield – 3D Printer Control Board

♦️Standard interfaces (as that of extruder)
♦️Reserved GCI like I2C and RS232
MOSFET 3 MOSFET are applied to the heater/ fan and thermistor circuit.
♦️Another 5A added to protect the component parts.
♦️An 11A fuse is added to the hotbed
Support 5 stepper drive board
♦️The adoption of Pin Header as pololu makes it more convenient to repair or change.
♦️I2C and SPI are reserved for expanding
♦️All the MOSFET can be controlled by PWM
♦️Use the interface of servo motor to adjust the level of printing platform automatically.
♦️ Adding a SD module for SD ramps module.
♦️LED can indicate the status of the heater (the open and close of MOS).

📌Price 2000
Contact 📱0914-839754
📱09-50-04-49-50
📌 ኣድራሻችን፡ 4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ.ቁ 103
🌐https://digitalelectronics.et/

📌Neodymium Magnet♦️Are made from strong neodymium-iron-boron alloy (NdFeB) and have a stylish nickel coating (Ni-Cu-Ni) ...
05/02/2026

📌Neodymium Magnet

♦️Are made from strong neodymium-iron-boron alloy (NdFeB) and have a stylish nickel coating (Ni-Cu-Ni) with an appealing silver surface that doesn’t rust or scratch
♦️The neodymium magnet is made of strongest magnetic material, which is bound meet your demands
♦️The round magnets are Ideal for DIY craft projects, science project magnets.
♦️Use these crafts magnets for anything, including finding studs in your wall, fastening, lifting, hanging objects, various projects & presentations, education, & more
♦️Made under ISO 9001 Quality Systems.

Address

4 ኪሎ: ቅድስት ስላሴ መንፈሳዊ ኮሌጅ ህንፃ፡ 1ኛ ፎቅ ቢ. ቁ 103ለ
Addis Ababa

Telephone

+251914839754

Website

Alerts

Be the first to know and let us send you an email when Digital Electronics PLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Digital Electronics PLC:

Shortcuts

Share

Category