22/10/2026
🍂 Cold spots on your radiators? Here’s what to check before winter sets in!
As the temperatures drop, it’s worth giving your radiators a quick check to make sure they’re heating your home properly.
🔧 1. Check for cold spots
Turn your heating on and let your radiators warm up. If the top feels cold while the bottom is warm, trapped air could be the culprit. Cold spots at the bottom can indicate sludge build-up instead.
🔧 2. Turn the heating off
Let your radiators cool down before you start. Grab a radiator key, an old cloth and a small container to catch any drips.
🔧 3. Bleed your radiator
Carefully open the bleed valve with your radiator key, turning it anti-clockwise just enough to release the trapped air. Once water starts coming out steadily, close the valve again. Don’t remove the screw completely.
🔧 4. Check your boiler pressure
Bleeding your radiators can lower your system pressure, so check your boiler afterwards and top it up if needed, following the manufacturer’s instructions.
🏡 When is it time to call us in?
If your radiators are still cold after bleeding, the bottom stays cold, some rooms take ages to warm up or you find yourself constantly bleeding the same radiator, there could be a bigger issue.
Sludge build-up, poor circulation or another heating system fault might need a closer look. That’s where we come in.
Don’t spend the winter battling a chilly house. Give us a shout and we’ll help get things warming up again. Covering Bristol, Devizes and everywhere in between.
l CSPlumbingHeating l HeatingTips l RadiatorMaintenance l PlumbingTips l BristolPlumbers l DevizesPlumbers l LocalTrades