Aveling Barford Calfdozer

Aveling Barford Calfdozer A page to celebrate and support owners and fans of the worlds smallest production bulldozer

One of our friends in New Zealand would like to know of any machines out there, either parked up or still operating.We k...
08/11/2026

One of our friends in New Zealand would like to know of any machines out there, either parked up or still operating.
We know of this one at the Packard Museum in Whangerei. A lot were shipped out between 1949 and 1960.
Where are the others?

We are at Newark tractor show this weekend at the Newark showground! Come down to see us and more at an excellent show.
07/11/2026

We are at Newark tractor show this weekend at the Newark showground!
Come down to see us and more at an excellent show.

I am reproducing and making the original lubrication plates and information plates for the Aveling Barford Calfdozer. Th...
10/10/2026

I am reproducing and making the original lubrication plates and information plates for the Aveling Barford Calfdozer.

The 4 different plates which go on the Mk 1, 2, 3, and 4 varients over the entire production run are now available.
I also have done the information plate which shows safe working angle, track tension and grease points.
These plates are all available to order now, the oil lubrication plates are ÂŁ49.99 posted and the information plate ÂŁ39.99 posted.
If anyone is missing the plate from their calfdozer and want to replace the plate get in touch!

I am also looking at doing plates for other models like the GA road roller etc.
If you require one of these plates remaking for your machine which is another model then drop me a message to discuss what your after.

All of these plates have been remade using original engineers drawings.

NEW POST - The last post I put up about this showed the image of the test run of the plates i had designed, I have now p...
07/10/2026

NEW POST - The last post I put up about this showed the image of the test run of the plates i had designed, I have now perfected this design and have put the photos of the final design of plate onto this post.
If you are after one of these plates for your machine please get in touch.

I have been working on the reproduction of the oil information lubrication plate that would have been fitted to an Aveling Barford Calfdozer MK4 fitted with an Armstrong and Siddeley engine new at the factory.
This plate has been reproduced with the original factory engineering drawings but using modern methods.
There are a couple of other varients of this plate which I can also make so if you have the Ruston engine or the Dorman engine varients let me know which model of the calfdozer you have and I can tell you which plate is correct for your machine.
These plates are made to order so sometimes take longer to post out.
I have attached the photo of the Armstrong and siddeley version of the plate along with some original pictures of different varients of the plate.

A special Aveling barford event this weekend at Grantham museum. There is a full display inside the museum including ori...
25/09/2026

A special Aveling barford event this weekend at Grantham museum.
There is a full display inside the museum including original build record books, advertising brochures, engineering drawings, pictures and other artifacts.
There will also been displays of live working machines along with a raffle to win some framed original advertising brochures.

I will be there with my calfdozer!

Amazing Aveling Barford prizes up for grabs! đźšś

We’ve got some fantastic Aveling Barford prizes in our raffle this weekend as part of our Industrial Weekend at Grantham Museum!

Just £1 per ticket – so why not grab a few and be in with a chance of winning one of these brilliant prizes?

A huge thank you to Ben Hobster for supporting the event and generously donating these fantastic raffle prizes.

Don’t forget to join us for our special Aveling Barford Industrial Weekend – there’s lots to see and do!

Find out more about the weekend here:
https://granthammuseum.org.uk/granthams-industrial-heritage-brought-to-life-at-special-aveling-barford-weekend/

So some of you may remember a few months ago I posted about lubrication and information plates for the calfdozer machine...
23/09/2026

So some of you may remember a few months ago I posted about lubrication and information plates for the calfdozer machines.

I enquired about getting some made and they were quite pricey so I have decided to try and reproduce the plates myself.

I have succeeded in reproducing one of the plates, the plate I have done first is the information plate which shows you greasing, track tension and safe working angles.
I have done this plate first as it was the easiest one to do but this plate is also very rare as almost none of the machines around still have this plate fitted.
It has been reproduced with modern methods using the original factory engineering drawings.

If you are interested in buying one of these plates I am selling them at ÂŁ50 each including postage, just drop me a message if you are interested.

I am currently working on the lubrication plates as we speak but they arnt ready yet, I know they are the more desired plates and I am looking at doing the three plates for each of the different varients and engines.
As soon as these are ready and available I will make another post.

Two photos from a recently discoverd album . They are from the late 1940's.An original MK1 Calfdozer on the back of a Fo...
21/09/2026

Two photos from a recently discoverd album . They are from the late 1940's.
An original MK1 Calfdozer on the back of a Fordson Lorry. " Stop Me and Try One"
Plus a line up of products at the works. On the back of the photo is Times Copyright,

We are at belvior steam rally this weekend, pop along to the show 👍🏻
29/08/2026

We are at belvior steam rally this weekend, pop along to the show 👍🏻

Calfdozer Parts Are you restoring your Calfdozer and in need of parts for the project? Parts for these machines in both ...
21/08/2026

Calfdozer Parts

Are you restoring your Calfdozer and in need of parts for the project?
Parts for these machines in both new/old stock or used second hand form are now ever increasingly rare to find.

If you are in need of parts but are struggling to find what you need get in touch!
I have the original engineering drawings from the factory which I have archived and logged on file so I know exactly what Iv got.
If you message me with the part number or numbers of what you require I can provide you with a copy of the original engineering drawing so that you can get the part you need manufactured.
I would charge a small fee to cover the copying and postage of the document you require, that fee would depend on how many drawings and the size of the engineering drawing.
I also manufacture some of the parts myself so could provide you with a quote to make the part you need.

Drop me a message to discuss your requirements and to get a quote for what is needed weather that be just a drawing or a complete part.

This is a brand new calfdozer seat I recently produced for The Wheatcroft Collection for their own Aveling Barford Calfd...
19/08/2026

This is a brand new calfdozer seat I recently produced for The Wheatcroft Collection for their own Aveling Barford Calfdozer.
It was produced from original engineering drawings and was produced to original specification.
If you are after any parts for your Calfdozer machines then drop me a message to discuss your requirements.

Address

Grantham

Website

Alerts

Be the first to know and let us send you an email when Aveling Barford Calfdozer posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share