JCE Renewable Services

15/08/2026

13/08/2026

Another one on the road — Shotton paper mill. 🔧⚙️

JCE Renewable Services mobilised at short notice to support emergency mechanical and fabrication alterations to a steam turbine generator drive cover assembly.

With downtime critical, our team provided rapid mobilisation, specialist mechanical support and on-site fabrication, delivering the required alterations to keep the overhaul programme moving.

Mechanical Engineering Fabrication Emergency Response Power Generation

To find out how JCE Renewable Services can support your business, don’t hesitate to get in touch.

📧 [email protected]
🌐 www.jcerenewableservices.com

12/08/2026

PRECISION FROM THE GROUND UP
HORNSEA 3

JCE Renewable Services has recently completed the installation of a specialist heavy-lift foundation for the upcoming Hornsea 3 project, supporting Siemens Gamesa, Ørsted and Sarens delivered seamlessly and ahead of programme.

The engineered foundation has been constructed to support a Terex CC 8800-1 Superlift crawler crane, operating at approximately 1,250 tonnes in its working configuration.

For a heavy-lift operation of this magnitude, what sits beneath the crane is every bit as critical as the lift itself.

Prior to construction, JCE coordinated the required CPT ground investigation and geotechnical analysis, providing the engineering data necessary to establish ground conditions, assess bearing capacity and determine the foundation requirements under the significant imposed loads generated by the CC 8800-1.

Following completion of the geotechnical assessment, our civils team delivered the engineered foundation under stringent quality, dimensional and survey control, working to the strict tolerances specified for the crane.

The completed working platform was constructed to a level requirement of ±0.3° (±0.5%), with particular attention given to formation levels, uniformity, load distribution and ground-bearing capacity across the crane's operational footprint.

Every stage followed a controlled and verifiable engineering process:

Ground Investigation
→ CPT Testing
→ Geotechnical Analysis
→ Engineered Ground Preparation
→ Precision Foundation Installation
→ Survey & Final Verification

Working collaboratively with Siemens, Ørsted and Sarens, JCE has delivered the foundation with a continued focus on safety, engineering compliance, dimensional accuracy and quality assurance while maintaining programme and completing the works ahead of schedule.

This scope demonstrates JCE's capability to deliver considerably more than the physical installation. By combining ground investigation, geotechnical engineering, specialist civils, precision construction and final verification, we provide an integrated solution for some of the renewable energy sector's most demanding heavy-lift infrastructure requirements.

When you're engineering the ground beneath one of the world's largest crawler cranes, precision isn't simply a target it's a requirement.

JCE Renewable Services
Engineering the foundations behind the lift.

03/07/2026

🏗️ Supporting Manchester's Regeneration 🔧

Manchester City Council

JCE Renewable Services is proud to be contributing to the ongoing regeneration of Manchester, providing specialist welding services at the Avery Building within the NOMA district.

It's a privilege to play a part in a project that is helping transform one of the city's most exciting commercial developments.

Our team continues to deliver the high standards of quality, safety and workmanship that our clients expect, supporting projects that leave a lasting legacy.

A huge thank you to everyone involved.

We look forward to continuing to support the successful delivery of this fantastic scheme.

01/07/2026

🌍 Supporting the future of offshore wind.

JCE Renewable Services have recently completed a programme of Cone Pe*******on Testing (CPT) and Topographical Surveying in preparation for the Hornsea 3 Offshore Wind Farm.

These vital ground investigation and survey works provide the geotechnical and topographical data required to support the safe planning, design and delivery of major infrastructure projects.
As the UK's renewable energy sector continues to grow, we're proud to play our part by delivering specialist engineering services with the quality, accuracy and responsiveness our clients expect.

Every successful project starts with solid foundations. Siemens Gamesa & Ørsted

27/06/2026

From the very first day the Wind Peak arrived at the Port of Hull to the final Tower been lifted, JCE Renewable Services has been proud to support the successful delivery of the Sofia Offshore Wind Farm project.

As this remarkable project draws to a close, we would like to express our sincere gratitude to Siemens Gamesa, RWE and Cadeler for placing their trust in JCE Renewable Services throughout this landmark development.

It has been a genuine privilege to play a part in one of the UK's most significant renewable energy projects. Sofia represents a major milestone for the offshore wind industry, and we are incredibly proud to have contributed to its successful delivery alongside such respected organisations. The 1.4 GW development stands as one of the world's largest offshore wind farms and is a testament to what can be achieved through collaboration, innovation, and a shared commitment to excellence.

Throughout our involvement, our team remained committed to delivering the highest standards of safety, quality, professionalism, and responsiveness. From supporting the earliest port operations and pre-assembly activities through to the final wind peak leaving Hull, every challenge presented an opportunity to demonstrate the values that define JCE Renewable Services Ltd. We are especially proud of the strong relationships we have built with the teams at Siemens Energy, RWE, Cadeler, and the wider project supply chain.

This project has provided JCE with opportunities to showcase our capabilities across a broad range of specialist engineering, mechanical, industrial, and logistical services. More importantly, it has allowed our people to work alongside some of the best professionals in the renewable energy sector, creating lasting partnerships and friendships along the way.

We are sincerely grateful for the opportunities, the trust, and the confidence shown in our team throughout the Sofia project. While this chapter comes to an end, we hope it marks the beginning of many more opportunities to work together in delivering the next generation of renewable energy infrastructure.

From everyone at JCE Renewable Services, thank you for allowing us to play a part in such an exceptional project. We wish everyone involved every success in the future and look forward to working together again on the projects that lie ahead.

24/06/2026

🚀 We’re Live! 🚀

After months of hard work behind the scenes, we’re proud to officially launch our brand-new website! 🌐💻

The new site showcases 👷‍♂️ who we are, 🛠️ what we do, and the diverse capabilities that make JCE Renewable Services Ltd a trusted engineering partner across the:

🌱 Renewable Energy
🏭 Petrochemical
⚡ Power Generation
🏗️ Construction
🔧 Industrial sectors

Our website highlights our broad range
of services, including:

⚙️ Mechanical Engineering
💦 Water Jet Cutting
🏗️ Hydro Demolition
🌡️ HVAC Services
♻️ Decommissioning
🦺 Specialist Industrial Solutions

At JCE Renewable Services we’ve always believed in doing things differently by combining 🧠 engineering expertise, 🏢 in-house capability, and an unwavering commitment to delivering projects safely 🛡️, efficiently ⏱️, and to the highest standards ⭐.

This new platform reflects our continued growth 📈 and makes it easier than ever for clients and partners 🤝 to explore how we can support their projects.

🙏 A huge thank you to our clients, employees, and supply chain partners for your continued support. We’re excited about what the future holds 🚀 and look forward to continuing to grow together.
💻 Take a look and let us know what you think!

🌐 www.jcerenewableservices.com
📧 [email protected]
📞 01482 789480

JCE Renewable Services Ltd is a UK-based, multi-disciplined mechanical, civil and industrial engineering contractor. We support clients across the renewable energy, petrochemical, infrastructure, manufacturing and process sectors nationwide.

22/06/2026

🚀 Strengthening Our Commitment to Excellence 🚀

We are proud to announce that JCE Renewable Services Ltd has successfully renewed and achieved:

✅ Constructionline Gold Membership
✅ Avetta Pre-Qualification Approval
✅ SSIP Accreditation

These accreditations are more than just badges they demonstrate our continued commitment to the highest standards of health & safety, quality, compliance, environmental responsibility, and operational excellence.

Constructionline Gold aligns suppliers with the industry's recognised pre-qualification standards, while SSIP verifies robust health and safety management systems.

At JCE Renewable Services, we have always believed that our clients deserve a contractor they can trust, one that invests in its people, systems, and processes to consistently deliver projects safely and efficiently.

Achieving and maintaining these accreditations reinforces our position as a trusted partner across the renewable energy, construction, industrial, petrochemical, and infrastructure sectors.

A huge thank you to our incredible team whose hard work, dedication, and commitment to continuous improvement have made this possible.

As we continue to grow, these achievements provide our clients with the confidence that when they engage with JCE Renewable Services Ltd, they are partnering with a business that is competent, compliant, and committed to delivering excellence every time.

25/04/2026

What can clients expect from JCE Renewable Services ?

Competence. Compliance. Delivery.

Our teams possess extensive experience across civil, mechanical, and decommissioning sectors, operating within high-risk industries where precision and accuracy are paramount.

Accredited and site-ready:

EUSR | CCDO | CSCS | WJA | NORMS | First Aid & Many more.

We are highly proficient in DSEAR environments, providing secure and controlled solutions within hazardous and explosive atmospheres.

Beyond labour provision, we offer engineering-led solutions, successfully implemented in shutdowns, operational plants, and intricate dismantling projects.

Reliable. Professional. Proven.

For those seeking professional expertise, JCE is the definitive choice.