VR CentralHeat

Home
VR CentralHeat

Call Website

“Your Comfort is Our Commitment: Expert Plumbing and Heating Solutions.” 📞Contact: 020 3633 7807

02/11/2026

🚽 Why Does My Toilet Keep Running After Flushing?

If your toilet keeps running after you flush, it usually means water is continuing to flow into the cistern or bowl when it should have stopped.

🔍 Common causes include:

• Faulty fill valve
• Worn or damaged flush valve seal
• Float set too high
• Sticking or damaged internal mechanism
• Limescale or debris inside the cistern
• Water level set incorrectly
• A problem with the flush button or cable

⚠️ Signs to look out for:

• Constant trickling into the toilet bowl
• Cistern taking too long to stop filling
• Water running long after flushing
• Increased water usage
• Flush button not returning properly
• Toilet making filling noises when nobody has used it

🛠️ What we provide:

✔ Toilet fault finding
✔ Fill valve replacement
✔ Flush valve repairs
✔ Cistern adjustments
✔ Seal and washer replacement
✔ Toilet repairs and replacement

💡 A running toilet can waste a surprising amount of water, so it is worth getting it checked rather than leaving it.

📞 Contact us for toilet repairs and bathroom plumbing services
📍 Serving local areas
🔧 Reliable service you can trust

30/10/2026

💧 What Is a Water Accumulator & How Does It Work?

A water accumulator is a pressurised storage vessel that helps improve water flow in properties where the incoming mains supply cannot keep up with demand.

It stores a reserve of water under pressure, ready to supply taps, showers, and appliances when several outlets are being used at the same time.

🔍 How does it work?

• Mains water enters the accumulator and fills the vessel
• Inside is a pressurised air or gas chamber separated from the water
• As the vessel fills, the air compresses and stores pressure
• When you open a tap or shower, the stored pressure helps push water out
• This can help maintain better flow during periods of high demand
• The accumulator then refills from the mains when demand reduces

✨ Benefits of a water accumulator:

• Helps improve water flow around the home
• Can reduce pressure drops when multiple outlets are used
• Useful for properties with several bathrooms
• Can improve shower performance
• Provides a reserve of pressurised water
• Often works without needing a booster pump

⚠️ When might you need one?

• Water pressure drops when another tap is opened
• Showers become weaker during busy periods
• Multiple bathrooms are used at the same time
• The mains flow rate is limited
• Your hot water system needs a stronger, more consistent supply

🛠️ What we provide:

✔ Accumulator installation
✔ Water pressure and flow testing
✔ System sizing and advice
✔ Accumulator pressure checks
✔ Fault finding and servicing
✔ Plumbing upgrades and alterations

⚡ A correctly sized accumulator can make a big difference to water flow and comfort in homes with higher water demand.

📞 Contact us for accumulator installation, water pressure checks, and plumbing services
📍 Serving local areas
🔧 Reliable service you can trust

29/10/2026

🚿 Why Is My Shower Head Dripping?

If your shower head keeps dripping after you turn the shower off, there may be an issue with the shower valve, cartridge, seals, or pressure inside the system.

🔍 Common causes include:

• Worn shower cartridge
• Damaged seals or washers
• Faulty thermostatic valve
• Limescale build-up
• High water pressure
• Water trapped inside the shower head or hose
• A valve that is not closing fully

⚠️ Signs there may be a fault:

• Dripping continues for a long time after use
• Water leaks even when the shower is fully off
• Temperature control becomes difficult
• Shower controls feel stiff
• Dripping is getting worse over time

🛠️ What we provide:

✔ Shower fault finding
✔ Shower cartridge replacement
✔ Thermostatic valve repairs
✔ Seal and washer replacement
✔ Water pressure checks
✔ Shower repairs and replacement

💡 A few drops immediately after use can sometimes just be leftover water draining from the shower head, but continuous dripping usually means something needs checking.

📞 Contact us for shower repairs and bathroom plumbing services
📍 Serving local areas
🔧 Reliable service you can trust

27/10/2026

🔥 Why Does My Radiator Keep Filling With Air?

If you keep bleeding the same radiator and air keeps coming back, there may be an underlying issue with your heating system.

🔍 Common causes include:

• A small leak somewhere in the heating system
• Low boiler pressure
• Air entering through a faulty automatic air vent
• Poor circulation
• Corrosion inside the system producing gas
• Problems with the expansion vessel
• Incorrect system setup or frequent topping up

⚠️ Signs to look out for:

• Radiator cold at the top
• Gurgling or bubbling noises
• Boiler pressure dropping regularly
• Heating taking longer to warm up
• Needing to bleed radiators often
• Uneven heating around the home

🛠️ What can help?

✔ Check boiler pressure
✔ Inspect the system for leaks
✔ Check automatic air vents
✔ Check the expansion vessel
✔ Balance the heating system
✔ Test inhibitor levels and system condition

💡 Bleeding the radiator may fix the symptom temporarily, but if air keeps returning, it is worth finding the cause.

📞 Contact us for radiator checks, heating diagnostics, and central heating repairs
📍 Serving local areas
🔧 Reliable service you can trust

26/10/2026

💧 Water Softener vs Water Filter , What’s the Difference?

Water softeners and water filters both improve water quality, but they do very different jobs.

🔍 Water Softener

A water softener is designed to reduce the minerals that cause hard water, mainly calcium and magnesium.

• Helps reduce limescale
• Protects boilers, cylinders, and pipework
• Helps taps and shower heads stay cleaner
• Can improve appliance efficiency
• Uses salt to regenerate the softening resin

🚰 Water Filter

A water filter is designed to remove or reduce unwanted substances from the water, depending on the type of filter being used.

• Can improve taste and smell
• Helps reduce sediment and particles
• Some filters reduce chlorine and certain contaminants
• Commonly used for drinking water
• Does not usually remove the minerals that cause hard water

✨ The main difference:

A water softener treats hard water and limescale.

A water filter focuses more on improving the quality, taste, and cleanliness of the water you drink and use.

🛠️ Which one do you need?

✔ Choose a water softener if limescale and hard water are the main problem
✔ Choose a water filter if you want better tasting or cleaner drinking water
✔ In some homes, both systems can be installed together

⚡ The right solution depends on your water supply, plumbing system, and what you want to improve.

📞 Contact us for water softener and water filtration installation
📍 Serving local areas
🔧 Reliable service you can trust

23/10/2026

🔥 What Is a Thermal Store Cylinder & How Does It Work?

A thermal store is a hot water storage system that stores heat in a large volume of water and then uses that stored heat to provide heating and hot water when needed.

Unlike a standard hot water cylinder, the stored water itself is usually not the same water that comes out of your taps.

🔍 How does it work?

• A boiler, immersion heater, solar system, or other heat source heats the water inside the thermal store
• The stored water holds that heat ready for use
• When you open a hot tap, cold mains water passes through a heat exchanger
• Heat from the stored water is transferred to the mains water
• Hot water is then delivered to your taps and showers
• The thermal store can also supply heat to radiators or underfloor heating, depending on the system design

✨ Benefits of a thermal store:

• Can provide strong mains-pressure hot water
• Can work with multiple heat sources
• Useful with boilers, solar thermal, and some renewable systems
• Can provide heating and hot water from one stored heat source
• Helps manage high hot water demand
• Can be suitable for larger homes and multiple bathrooms

⚠️ Signs a thermal store may need attention:

• Hot water not getting hot enough
• Poor hot water flow
• Temperature changing during use
• Unusual noises from pumps or components
• Leaks around the cylinder or pipework
• Heating or hot water taking longer than usual

🛠️ What we provide:

✔ Thermal store installation
✔ Thermal store servicing
✔ Pump and control checks
✔ Plate heat exchanger checks
✔ Fault finding and repairs
✔ Cylinder replacement and upgrades

⚡ A thermal store can be a flexible way to manage heating and hot water, especially in homes using more than one heat source.

📞 Contact us for thermal store installation, servicing, and repairs
📍 Serving local areas
🔧 Reliable service you can trust

22/10/2026

🌧️ What Is a Soakaway Kit & How Does It Work?

A soakaway kit is a drainage system designed to collect rainwater and allow it to slowly soak back into the ground instead of building up on the surface.

It is commonly used for roof water, patios, driveways, and other areas where surface water needs to be managed properly.

🔍 How does a soakaway work?

• Rainwater flows from gutters, downpipes, or surface drains
• The water travels through underground drainage pipework
• It enters the soakaway crates or chamber
• The system temporarily stores the water
• Water then gradually disperses into the surrounding soil
• This helps reduce surface water and localised flooding

✨ Benefits of a soakaway system:

• Helps prevent water pooling
• Reduces pressure on surface drainage
• Helps manage rainwater around the property
• Can reduce the risk of garden or driveway flooding
• Keeps water away from vulnerable areas
• Provides a practical underground drainage solution

⚠️ Why correct installation matters:

• The soakaway must be the right size
• Soil conditions need to allow water to drain away
• It should be positioned correctly away from buildings and foundations
• Pipework needs the correct fall
• Poor installation can lead to overflowing or slow drainage

🛠️ What we provide:

✔ Soakaway installation
✔ Drainage assessments
✔ Soakaway crate installation
✔ Rainwater drainage connections
✔ Drainage repairs and upgrades
✔ Professional and tidy workmanship

⚡ A correctly installed soakaway can help manage rainwater efficiently and reduce problems with standing water around your property.

📞 Contact us for soakaway installation and drainage services
📍 Serving local areas
🔧 Reliable service you can trust

21/10/2026

🔥 What Is a Gas Tightness Test?

A gas tightness test is a safety check used to confirm that the gas pipework in a property is not leaking.

A Gas Safe registered engineer carries out the test using specialist equipment to check whether the gas installation can hold pressure correctly.

🔍 What happens during a gas tightness test?

• The gas supply is isolated as required
• A pressure-testing instrument is connected at the gas meter
• The gas installation is tested for pressure loss
• The engineer checks whether the system remains within permitted limits
• If a leak is suspected, further investigation is carried out to find the source

⚠️ Why does it matter?

• Helps identify gas leaks
• Confirms the gas pipework is safe to use
• Can reveal faults in joints, valves, or fittings
• Helps protect occupants from gas-related risks
• May be required after certain gas work or when investigating a suspected leak

🚨 Signs you may need a gas tightness test:

• You can smell gas
• A gas appliance has been disconnected or replaced
• New gas pipework has been installed
• There is concern about an existing gas installation
• A previous inspection has identified a possible issue

🛠️ What we provide:

✔ Gas tightness testing
✔ Gas leak detection
✔ Gas pipework inspections
✔ Fault finding
✔ Gas safety checks
✔ Gas Safe registered work

⚡ A gas tightness test is an important way of checking that your gas installation is safe and free from leaks.

📞 Contact us for gas tightness testing and gas safety checks
📍 Serving local areas
🔧 Reliable service you can trust

20/10/2026

🔥 Combi Boiler vs System Boiler vs Heat-Only Boiler, What’s the Difference?

Choosing the right boiler depends on the size of your property, how much hot water you use, and your existing heating system.

🔍 Combi Boiler

A combi boiler provides heating and hot water directly from the boiler without needing a separate hot water cylinder.

• No hot water cylinder required
• No cold water storage tank needed
• Compact and space-saving
• Hot water is heated on demand
• Ideal for many smaller and medium-sized homes
• Hot water flow can be limited when several outlets are used at once

🔍 System Boiler

A system boiler provides heating and works with a separate hot water cylinder to store hot water.

• Requires a hot water cylinder
• No traditional cold water storage tank usually needed
• Good for homes with higher hot water demand
• Can supply several taps and showers at the same time
• Ideal for larger homes with multiple bathrooms
• Takes up more space than a combi system

🔍 Heat-Only Boiler

A heat-only boiler, sometimes called a regular or conventional boiler, usually works with both a hot water cylinder and a cold water storage tank.

• Requires a hot water cylinder
• Usually requires a cold water storage tank
• Common in older or more traditional heating systems
• Suitable for larger homes
• Can work well where existing pipework is designed for this type of system
• Requires more space for tanks and components

✨ Which one is right for you?

A combi boiler is often best where space is limited and hot water demand is moderate.

A system boiler can be a good choice for larger homes with several bathrooms.

A heat-only boiler may suit properties with traditional heating systems or higher hot water requirements.

📞 Contact us for boiler installation, replacement, and heating advice
📍 Serving local areas
🔧 Reliable service you can trust

19/10/2026

🔥 Signs Your Underfloor Heating May Need Repairing

Underfloor heating should provide even, comfortable warmth across your rooms. If the system is not working as it should, there may be a fault with the controls, manifold, pump, pipework, or circulation.

🔍 Common warning signs:

• Cold spots on the floor
• One room or zone not heating
• Heating taking much longer than usual
• No heat even though the thermostat is on
• Uneven temperatures between rooms
• Boiler pressure dropping regularly
• Unusual noises from the manifold or pump
• Thermostat not responding properly
• Leaks or moisture around the manifold
• Flow meters showing little or no movement

⚠️ Why you shouldn’t ignore these signs:

• Heating efficiency can be reduced
• The system may work harder than necessary
• Small faults can develop into larger repairs
• Leaks can cause damage if left untreated
• Poor circulation can affect comfort throughout the property

🛠️ What we provide:

✔ Underfloor heating fault finding
✔ Manifold and pump checks
✔ Actuator replacement
✔ Thermostat and control diagnostics
✔ Leak detection
✔ System balancing and testing
✔ Repairs and maintenance

⚡ If your underfloor heating is uneven, slow, or not responding properly, getting it checked early can help restore performance and prevent further problems.

📞 Contact us for underfloor heating repairs, servicing, and maintenance
📍 Serving local areas
🔧 Reliable service you can trust

Address

391 Archway Road

N64ER

Opening Hours

Monday	08:00 - 17:00
Tuesday	08:00 - 17:00
Wednesday	08:00 - 17:00
Thursday	08:00 - 17:00
Friday	08:00 - 17:00
Saturday	08:00 - 12:00

Telephone

+442036337807

Website

https://vrcentralheat.co.uk/

Alerts

Be the first to know and let us send you an email when VR CentralHeat posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.