B.R.Fabrication

B.R.Fabrication Bespoke Metal Fabrication

Extremely heavy duty cable reel stands. Posts weighing in at approximately 20kg each and 50mm solid polished bar to carr...
05/09/2026

Extremely heavy duty cable reel stands. Posts weighing in at approximately 20kg each and 50mm solid polished bar to carry even the heaviest of cable reels for

Bespoke double barn doors to fit the front of this shed as the customer no longer wanted to keep it open fronted. Fitted...
04/09/2026

Bespoke double barn doors to fit the front of this shed as the customer no longer wanted to keep it open fronted. Fitted with drop pins, upward pins and padlock. Hinges welded on site and fitting made a lot easier with the help of George Turley

Small 316 stainless steel posts with base plates welded internally to keep the exterior weld free.
02/09/2026

Small 316 stainless steel posts with base plates welded internally to keep the exterior weld free.

Small custom JD Builders hop up step made on a micro dumper for Jack Davies
31/08/2026

Small custom JD Builders hop up step made on a micro dumper for Jack Davies

Some mini fixture tables for the workshops that double up both as trestles and guides for the iron worker. 6mm thick las...
30/08/2026

Some mini fixture tables for the workshops that double up both as trestles and guides for the iron worker. 6mm thick laser cut flat with 16mm holes to allow the use of clamping fixtures.
A great addition to the workshop and I have since added retractable castors to easily move them around.

3” 316 Stainless steel header with 12 upright pipes welding off it and 1 downward drain welded on along with some stainl...
28/08/2026

3” 316 Stainless steel header with 12 upright pipes welding off it and 1 downward drain welded on along with some stainless flanges for Mark Bufton

A well needed upgrade for the rear entrance of this property to allow access to the back of the garden.-Composite gate b...
26/08/2026

A well needed upgrade for the rear entrance of this property to allow access to the back of the garden.

-Composite gate boards
-Powder coated frame
-Solid fixed hinges
-New posts

Great help from George Turley fitting and very happy how it turned out.

Nice to get this handrail fitted after a fair bit of head scratching in the design. Turned out great! Job for JD Builder...
24/08/2026

Nice to get this handrail fitted after a fair bit of head scratching in the design. Turned out great! Job for JD Builders

Proper replacement of the underside of this tipper bed after what seemed to be a never ending load of bodged patched job...
06/04/2026

Proper replacement of the underside of this tipper bed after what seemed to be a never ending load of bodged patched jobs by someone else. All cut away. Re-braced some of the CTR and edges then some solid 3mm sheets welded in place. Filled all the gaps that weren’t welded to prevent any moisture getting in and rotting again. Then sunshine with a black primer and top coat.

Also had to gas cut away the existing pivot blocks on the chassis as the were seised solid and fabricate some new ones along with a new pivot bar.

Address

Newtown

Website

Alerts

Be the first to know and let us send you an email when B.R.Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to B.R.Fabrication:

Shortcuts

Share

Category