What are the opening hours?

Monday 08:30 - 16:30 Tuesday 08:30 - 16:30 Wednesday 08:30 - 16:30 Thursday 08:30 - 16:30 Friday 08:30 - 16:30 Saturday 10:00 - 15:00

Source Link Ghana Limited Company

Home
Ghana
Accra
Source Link Ghana Limited Company

Website

We supply the best paint in Ghana. We supply Fireproof Paints and Industrial Coatings - e.g.

Anti-Rust Paint, Anti-Corrosion Paint, Anti-Abrasion Paint, Chemical Resistant paint, Waterproof Paint, Leakproof Paint/Coatings, Equipment protective Paint....

28/10/2026

🔥 THE ENDLESS FIGHT AGAINST FIRE — BUT THIS TIME, WE’RE WINNING
Bushfires don’t just burn land — they destroy infrastructure, disrupt power, and create costly setbacks. Across many sites, electrical poles and installations have been lost to fire damage, leaving communities vulnerable.
But it doesn’t have to be this way.
With NoFire® A18 Fire-Retardant Intumescent Coating, the difference is clear.
While untreated poles are damaged and weakened, protected structures stand strong even after exposure to fire.
NoFire A18 works by expanding under extreme heat to form a protective barrier that slows flame spread, reduces heat transfer, and preserves the integrity of the substrate. In high-risk environments like bushfire zones, that protection can mean the difference between failure and survival.
This is not just paint.
This is protection that performs when it matters most.
📞 WhatsApp or Call:
+233 243 12 5882 | +233 507 65 6464 | +233 25 602 5000
🌐
📧 [email protected]

28/10/2026

👷🏽‍♂️ Right beside the steel—is where a small detail deserves a serious conversation.

An edge. A weld. A difficult-to-reach surface.

These are the details worth discussing before coating begins, while the team can examine the asset, ask questions and agree on the right approach.

At Industrial Coatings Africa, we believe technical support belongs here: on the field, listening to the people doing the work and turning technical requirements into practical action.

What is the substrate? What will it be exposed to? Can every critical area be prepared, coated and inspected properly?

The better we understand the asset, the better we can plan its protection.

👇 What detail on your site is easiest to overlook—and hardest to repair later? Share your experience.

28/10/2026

🔥 WHEN FIRE STRIKES, PROTECTION MUST RESPOND IMMEDIATELY — NOFIRE®
Fire spreads fast. In seconds, heat and flames can damage structures, destroy equipment, and put lives at risk.
That’s why protection must do more than resist fire — it must actively fight it.
NoFire® is a one-part, non-flammable, water-based intumescent fire-retardant coating designed to protect surfaces under extreme heat conditions. Similar in appearance to ordinary latex paint, NoFire® transforms under fire exposure.
When exposed to temperatures above 200°C (400°F), it rapidly foams and expands, forming a thick insulating barrier that shields the substrate from intense heat — even at temperatures exceeding 1090°C (2000°F).
Built for high-performance fire protection, NoFire® offers:
✔️ Water-based and environmentally safe
✔️ Non-toxic and non-combustible
✔️ Zero flame spread and zero smoke generation
✔️ Fire protection ratings up to 120 minutes
✔️ Resistant to mold, UV, humidity, and aging
✔️ Available in multiple colors and tints
✔️ Easy application by brush, roller, or spray
✔️ Effective on a wide range of surfaces and substrates
Recommended for:
• Homes and offices
• Warehouses and factories
• Electrical and server rooms
• Power stations and generator rooms
• Chemical and paint storage facilities
• Electrical poles and cables
• Wooden and steel structures
• Transportation systems including buses, trains, ships, and aircraft
• Fire-prone industrial and commercial environments
From structural steel to critical infrastructure, NoFire® delivers advanced fire protection where it matters most.
This is not just coating.
This is intelligent fire defense engineered to protect lives and assets.
📞 Call or WhatsApp us today:
🇬🇭 Ghana: +233 243 12 5882 / +233 50 765 6464 / +233 25 602 5000
🇳🇬 Nigeria: +234 808 330 5449
🇿🇦 South Africa: +27 (0)81 583 8959

28/10/2026

🚀 From blaster to coating inspector in 4 steps

Master TDS, learn WFT / DFT gauges, target CIP Level 1, shadow QA/QC.

Your gun time is your advantage.

👇 What's holding you back from CIP 1?
Share your holdback in the comments section for tailored advice

27/10/2026

👷 Good evening from site

Protecting steel is a daily work. Check prep, check weather, then coat.

Skip one step and water will find it.

20 years doing this and we still learn on every job.

👇 What have you been working on today?
Share and inspire someone.

27/10/2026

Fire Protection & Safety Standards: Don’t wait for fire emergency

•
•
•
•

27/10/2026

Beside the steel, we can examine the details, understand the challenges and explain what needs to be done—and why.
Every edge, weld and joint deserves attention. Working directly with the team helps turn technical requirements into practical steps for better coating application and lasting asset protection.
👇 What coating challenge would you want a technical expert from Industrial Coatings Africa to assess on your site?

27/10/2026

CAREER TUESDAY: DRY DOES NOT MEAN CURED. THIS MISTAKE CAN COST YOU.

Imagine a coating that feels dry to the touch. The surface looks good, and the next coat is ready to be applied.

But is the coating actually ready?

Not necessarily.

One of the most important concepts for anyone entering the protective coatings industry is understanding the difference between drying and curing.

Drying may involve the evaporation of water or solvent, allowing a coating to form a film. Curing involves the chemical reactions or physical processes that develop the coating's intended properties. Depending on the technology, these processes may overlap, but they are not interchangeable.

An epoxy coating, for example, typically develops its properties through a chemical reaction between its components. A moisture-cured polyurethane relies on moisture to drive its curing reaction. Other coatings may dry primarily through water or solvent evaporation.

Why does this matter?

A coating that has not reached the required cure may lack its intended chemical resistance, hardness or mechanical performance. Applying another coat too early can also cause problems if the specified recoat conditions are not met.

And here's where inexperienced professionals can make costly assumptions: touch-dry is not the same as ready for immersion, chemical exposure or service.

If you're building a career in coatings, learn the difference between dry-to-touch, dry-to-handle, minimum and maximum recoat intervals, and full cure. Understand how temperature, film thickness, ventilation and coating chemistry influence these times.

Always consult the manufacturer's Technical Data Sheet for the relevant conditions and cure requirements. A coating that cures in 24 hours under one set of conditions may take significantly longer under another.

This knowledge is essential for applicators, inspectors, QA/QC personnel and engineers responsible for coating performance.

Don't just ask, “Is the coating dry?” Ask, “Has it reached the condition required for the next stage of work or its intended service?”

That is how technical understanding becomes sound professional judgment.

Are you new to the coatings industry? Comment “CURING” if you'd like us to explain how different coating technologies cure and what can go wrong when curing is misunderstood.

26/10/2026

Ordinary decorative paint is not a passive fire-protection specification.

Fire-sensitive assets such as data centres, server rooms, electrical rooms and critical infrastructure require a coating system selected around the actual substrate, tested assembly, application requirements and documented performance evidence.

NoFire A18 is a fire-retardant intumescent coating designed to take care of the business. Suitability and performance must always be confirmed within the applicable test, certification and project specification.

Before specifying, confirm:
✅ The substrate or assembly
✅ The fire-performance objective
✅ The applicable test or certification
✅ Surface preparation and application requirements
✅ Environmental and service conditions
✅ Inspection and handover documentation

Save this carousel and share it with your engineering, facilities, HSE or maintenance team.

Need help reviewing a passive fire-protection requirement? Visit or contact Industrial Coatings Africa for technical support.

📞 Call or WhatsApp Us Today

🇬🇭 Ghana
+233 243 12 5882
+233 50 765 6464
+233 25 602 5000

🇳🇬 Nigeria
+234 808 330 5449

🇿🇦 South Africa
+27 (0)81 583 8959

Address

Block KS33 Klan Street, Off Dadeban Road, Adjacent Promasidor Gh. Ltd. (Cowbell), North Industrial Area, Accra-Ghana
Accra
00233

Opening Hours

Monday	08:30 - 16:30
Tuesday	08:30 - 16:30
Wednesday	08:30 - 16:30
Thursday	08:30 - 16:30
Friday	08:30 - 16:30
Saturday	10:00 - 15:00

Website

https://sourcelinkgh.com/

Alerts

Be the first to know and let us send you an email when Source Link Ghana Limited Company posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.