Cable and Fiber Enclosure

03/07/2026

SIGNALMAX.NET Rackmount 20-way slide-out fiber enclosure Datasheet
Model number: SG-ST01-20

Description:
The SignalMAX.NET Rack Mount 20-Way Slide-Out Fiber Enclosure is designed for organised fibre termination, splicing, patching and cable management inside 19-inch network cabinets, telecom racks, data centres, FTTH distribution points and enterprise LAN installations. The slide-out tray allows technicians to access adapters, pigtails, splice protectors and internal fibre routing areas from the front, helping to simplify installation, inspection, maintenance and future network expansion.

Built for stable optical performance and clean cable administration, the enclosure provides protected fibre storage, bend-radius control, rear cable entry and secure cable fixing. The 20-way front interface is suitable for structured fibre distribution where compact rack space and easy port identification are required. It can be supplied for common fibre connection applications, including single-mode OS2 and multimode fibre systems, with connector options such as SC, LC, FC or ST subject to project requirements.

Key Features
20-way rack mount fibre enclosure for optical distribution and patching
Slide-out tray design for convenient front access and maintenance
Suitable for 19-inch rack and network cabinet installation
Internal fibre routing area for bend-radius protection
Supports fibre splicing, pigtail management and adapter mounting
Rear cable entry with cable fixing and strain-relief arrangement
Clear port layout for labelling, testing and troubleshooting
Suitable for telecom rooms, ISP networks, data centres, LAN, WAN and FTTH projects

Standards compliance:
IEC 60297 for 19-inch rack mechanical structures
IEC 61754 for fibre connector interfaces
IEC 61755 for optical connector interfaces
IEC 61300 for fibre-optic interconnecting device test & measurement procedures

Specification:
Capacity: 20 ports
Panel material: Aluminium alloy
Material thickness: 1.2 mm
Dimension: 430 mm x 320mm x 44 mm
Number of adaptors: 20 x SC/UPC simplex adaptors

Physical design:
Front sliding drawer to house optical equipment with cable holes at front and rear corners for fibre patch cord running
Rackmount fiber enclosure is designed for fiber connection and distribution of backbone fiber cable
The unit tray can be slided out for installers to terminate or manage the fiber core
The adapter plate is changeable

Accessories:
Supplied with a double side spongy adhesive tape
Front panel label printed with port number
Stackable fiber cassette

https://signalmax.net/products/ols/products/rackmount-20-way-slide-out-fiber-enclosure

29/06/2026

SIGNALMAX.NET Swing-Out Rack Mount Fibre Panel | 1 RU Fibre Optic Patch, Splice and Distribution Panel
Data Sheet
Item number: SG-010532

Mechanical Properties
Dimension: Width 484 mm x Depth 376 mm x Height 44 mm
Material: 2.0 mm thickness Aluminium Sheet
Coating on the metal sheet: Painted with one layer of stoving Etch Primer & one topcoat of stoving Polyurethane to one specified colour.
Swing-out rack-mount fibre panel hinge supports minimum 1,000 open/close swing cycles* tested under fully loaded condition.

* One complete cycle means: closed > fully opened to 90 degrees > closed again

Accessories:
Modular 6 port snap-in adaptor plate
30-degree angled connector patch panel
Fibre splicing tray x 1 pc
SC UPC adapters x 12 pcs

Swing-Out Rack Mount Fibre Panel | 1 RU Fibre Optic Patch, Splice and Distribution Panel Data Sheet Item number: SG-010532 Mechanical Properties Dimension: Width 484 mm x Depth 376 mm x Height 44 mm Material: 2.0 mm thickness Aluminium Sheet Coating on the metal sheet: Painted with one layer of stov...

06/06/2026

42U Optical Distribution Frame
Item number: SG-ODF-2293

Floor-standing ODF cabinet
Standard 19” width installation
Full front operation
Installed on the floor
Complete cable routing design with fiber bend radius over 40mm.
Modular design and easy installation Inlet/outlet cables from top or bottom
Optimal arrangement for patch cords with fiber storage units
Reliable holding, protection and grounding for optical cables
Suitable for ribbon and non-ribbon optical fibers
Can be installed with value-added modular units, such as., Fiber Splittters and WDM

https://signalmax.net/products/ols/products/optical-distribution-frame

19/05/2026

SIGNALMAX.NET Fan out Penum Fiber Cord
12 cores
Item number: SG-FT-12

Connector: SC UPC

Each connector is labelled with number tag for core identification.

Singlemode G657A1 fiber optics

Cable diamter: 2 mm

Cable jacket: Low smoke Zero Halogen

Test standard: FT4 vertical flame test complied

Length: 30 meters or other length based on the user requirements

No Connector at one end

Insertion loss : 0.3 dB on average

Return loss: 50 dB or above

https://signalmax.net/products/ols/products/fanout-fiber-cable

28/04/2026

10 WAY DIN RAIL POWER DISTRIBUTION PANEL
Item number: SG-DE-10

Standard 35 mm DIN rail mounting
Durable, flame-retardant enclosure material
Compact and modular design
Easy installation and maintenance
Transparent or opaque hinged cover (optional)
IP-rated protection against dust and water
Pre-marked cable entry points (top/bottom)
Compatible with major brands of MCBs/RCDs
Mounting Type : Wall-mounted / Flush-mounted / Rack-mounted / SIGNALMAX.NET equipment cabinet
Material : Steel Sheet
DIN Rail Standard : 35 mm (EN 60715)

12/04/2026

MQ5 Radio Frequency Jumper Cable
connected with 5 pieces of 4.3-10 male connectors
Item number: SG-MQ5

Equipped with 1 MQ5 screw connection and 5 high-quality 4.3-10 male connectors (50 Ω) per IEC 61169-54.

Technical Specifications:
• Cable Type: 1/4" Super Flexible
• Length: Customized (tolerance: +40 mm / -25 mm)
• Jacket Material: Durable PE outer jacket (black)

21/01/2026

SIGNALMAX.NET Wall mount 24 port fiber enclosure
Item number: SG-WM24
Capacity: 12 to 24 fibre termination
Dimension: Length 300 x Width 300 x Depth 80 mm

Unit price: USD 57/per set
No minimum order quantity
International shipment

Wall mount 24 port fiber enclosure Item number: SG-WM24 Capacity: 12 to 24 fibre termination Dimension: Length 300 x Width 300 x Depth 80 mm Adaptor Options: SC, ST, FC, LC adaptor Material:   The main body is fabriated from aluminium sheet. The panel is fabricated from cold rolled steel sheet. The...

12/01/2026

The Double Side Integrated Outdoor Cabinet is used to accommodate telecom equipment at front side and copper cable terminations with jumper field at the rear side. It will be installed in the outdoor environment under extreme high temperature, high humidity and
adverse weather condition.

Designed by SIGNALMAX.NET product team

Innovative Solutions to create Cable, Cabinet, Cable Accessory and Enclosure for a PON (Passive Optical Network) network.

24/12/2025

SignalMAX.NET metal basket is designed to keep your cable accessories in place to help you handle / organize kits. It handles CATV / fiber splitter / tap / amplifier or other devices. Cables can be attached and stored to the clamp kit.

Designed by SIGNALMAX team
on 24 Dec 2025