Applied Engineering Solutions AES

20/05/2018

2200 mm dia ring being machined at our works in Faizabad.

15/06/2017

CW Pump Impeller (OD 1000mm and approx. Wt. 800 kg) of NTPC Tanda being balanced at our works in Faizabad. The same was balanced after coating was done for efficiency enhancement.

09/06/2017

Recently added Laser Shaft Alignment services to our portfolio. The same being performed at a client site.

28/04/2017

WE UNDERSTAND SYSTEMS

OUR IDEOLOGY
We do not just refurbish/ repair the faulty spares but try to understand the fault in machine and eliminate the route cause.

CASE STUDY

PROBLEM
We got a 70HP slip ring motor rotor to repair whose shaft was breaking frequently.

FINDINGS
While studying the issue we came across that the MOC used in shaft was not up to the standard as the party was asking for lower MOC and the person repairing it was not bothered or not knowing about it. We insisted on changing and upgrading MOC of shaft as per standard. Party dint asked but we insisted on getting dynamic Balancing of rotor which we dont know was performed earlier. We asked whether cooling fan and pulley of rotor was balanced ? They were not aware. We asked to send them also to us for Balancing.

WORK PERFORMED
* Broken shaft was removed and new shaft with upgraded MOC was fitted.
* Rotor was dynamically balanced.
* Motor cooling fans and pulley dynamically balanced.

RESULT
* Motor working smoothly with reduced power consumption.

06/04/2017

7 Apr 17
FLOUR MILL SCORER ROTOR

PROBLEM
Sides and bearing seats worn out.

POSSIBLE CAUSE OF PROBLEM
Vibration above limits.

TASK PERFORMED
Both sides and bearing seats were metallized and machined.
Dynamic Balancing was done on Rotor first and then with beaters fitted.

FINAL RESULT
Vibration came under limits.

04/04/2017

4 April 17
Turbine Alternator Rotor of Distillery for repairing and Dynamic Balancing.

PROBLEM
1. Old L Key bolt got siezed.
2. High Vibration.

WORK PERFORMED
1. Old L Key bolts were removed.
2. Dynamic Balancing performed.

FINAL RESULT
1. New L Key bolts fitted.
2. Vibration was under standard limits after Dynamic Balancing.

04/11/2015

We are Proud to Announce that our Manufacturing Facility- Bharat Engineering & Casting has been shortlisted by Quality council of India, for its Initiative Zero Defect, Zero Defect-ZED, an Initiative started by our Honorable Prime Minister Mr. Narendra Modi. We are one of the 70 Workshops selected all over India, and the only one selected from UP. Thank you all for your support.

04/11/2015

FBD System Impeller- Designed, Tested, Fabricated at ADES Facility. there are many companies in India that make blowers but rarely any companies in India which do R & D for the same or provide you Fan Curve Data, this Impeller was designed from scratch as per clients requirement, Backup with Complete FEA Testing for loads and Flow Requirements, Finally Dynamically Balanced on our latest dynamic balancing machine at required RPM.

04/11/2015

One of Its kind, Cooling Tower Fan, Ready for Dynamic Balancing !

04/11/2015

Our In-house Crane, Designed and Fabricated at ADES Facility!
Capacity: 5 TONS,
Specialty: lightest in its category
High Capacity wheels and bearing for easy movability

10/08/2015

Products & Services Offered

04/05/2015