FastParts

Sito Web Contatta l'azienda

FastParts Servizio professionale di manifattura additiva. Progettazione 3D, Stampa 3D e Reverse Engineering.

Not one part. A whole series. 👇Think 3D printing is only for prototypes, or too slow for production? Not on a printfarm....
27/10/2026

Not one part. A whole series. 👇

Think 3D printing is only for prototypes, or too slow for production? Not on a printfarm.

Many printers working in parallel, in our production plan in Ruvo di Puglia:
▪ One file, many machines: the same part runs on several printers at once
▪ Two materials in one print: technical filament with water-soluble supports
▪ With a typical part: 16 in a working day, instead of 8
▪ Same space, same power

From the first prototype to the small batch, with the same workshop and the same file.

How many do you need? Tell us the part and the quantity, in the comments or by DM.

FFF, resin, SLS or Metal FFF? Which would you choose? 👇Same part, four 3D printing processes, four different results. Th...
23/10/2026

FFF, resin, SLS or Metal FFF? Which would you choose? 👇

Same part, four 3D printing processes, four different results. The right choice depends on what the part has to do, not on which technology is "best".

In this carousel we compare them on six criteria: ▪ Surface ▪ Supports ▪ Isotropy ▪ Materials ▪ Size ▪ Batch

On the last slide: the five things we need to choose the right process for your part.

Write your pick in the comments, then swipe. Save this post for your next quote.

Any doubts? Send us a DM or visit fastparts.it

Transparent. Biocompatible. Autoclavable. 🔍Last clue: it prints on filament at 270–285 °C.Can you name the material? Dro...
21/10/2026

Transparent. Biocompatible. Autoclavable. 🔍

Last clue: it prints on filament at 270–285 °C.

Can you name the material? Drop your guess in the comments before you reach the last slide.

Swipe to find out →

USP Class VI and ISO 10993 certified, PFAS-free. We print it for medical device prototypes, custom guides and jigs, and lab components.

Working on a medical project? Send us a DM or visit our website.

16/10/2026

Resin isn’t just for prototypes 🧪

Smooth finish, crisp details, isotropic properties. And materials for parts that actually work:

– Rigid, for dimensional stability
– Tough, for impact resistance
– Ceramic, with HDT up to 280 °C
– Flame retardant
– Flexible

The catch? Getting there. Alcohol wash, supports, UV post-cure, waste disposal. Plus gloves, goggles, respirator. Every single time 🥽

Or... you send the file. We send you the finished part 📦

👉 Send us your file on WhatsApp, link in bio.

Broken part. No drawing. Machine stopped.🔧We scan it, rebuild it as a clean CAD model, fix the weak point and print it i...
14/10/2026

Broken part. No drawing. Machine stopped.🔧

We scan it, rebuild it as a clean CAD model, fix the weak point and print it in the right material, from polymers to 316L and 17-4 PH stainless steel.

Swipe to see how ➝
📸Send us a photo of your broken part. Link in bio.

Some shapes FFF just can’t print. SLS can.The reason is simple: in SLS the powder is the support. A laser fuses each lay...
13/10/2026

Some shapes FFF just can’t print. SLS can.

The reason is simple: in SLS the powder is the support. A laser fuses each layer into a bed of powder, and the powder it doesn’t touch holds up every overhang. When the job is done, it’s brushed and blown away.

That opens up three things filament can’t do:
→ curved channels closed inside the part
→ lattices with thousands of struts and zero supports
→ joints that come out of the printer already moving

Swipe to see how, plus what changes when you break the part.

Which geometry is blocking you today? Tell us in the comments 👇

09/10/2026

This is plastic. And the metal detector finds it 🔍

A hopper for a food packaging line, 3D printed on the large-format ELEMENTO TC5 by .3d

It's made from magnet-detectable PETG. If it breaks on the line, even a small fragment gets caught by the metal detector. Standard PETG goes straight through.

We design it around your machine: connections, inlet, slope. One part or a small batch, no tooling. And your logo on top ✅

Hoppers, chutes, guides, conveyors. If it's on your line, we can make it.

📩 Send us photos and dimensions on WhatsApp: +39 339 898 9129

Brakes running too hot? We 3D-printed a brake cooling duct for a 890 Duke R.In motorsport, cooling ducts are often inte...
08/10/2026

Brakes running too hot? We 3D-printed a brake cooling duct for a 890 Duke R.

In motorsport, cooling ducts are often integrated into the bodywork or added as appendages to keep heavily stressed components at operating temperature. We developed a dedicated duct for the front brake system, from 3D scanning to the printed part.

Process:
- 3D scan of the front end: no drawings, the scan became our reference geometry
- Design for printing: 0.8 mm walls, overhangs within 40°, no supports
- CFD simulation, run and run again, with the scanned fender included in the model
- Internal guide vanes printed in one piece with the duct walls
- Polypropylene with 100% recycled carbon fiber
- Two halves that snap together: no screws, no tools
- Texture and logo built into the file, printed with the part

Your team's name, a number, a logo: it goes into the CAD and comes out of the printer.

From scan to fitted part, with a single supplier. For enquiries on similar applications, contact us👉 link in bio

With Angelo Di Gioia and Giovanni Di Franco
.3d

Resin parts look simple. The process behind them isn't. 🔬Precise, smooth SLA, LCD and DLP parts need more than a printer...
06/10/2026

Resin parts look simple. The process behind them isn't. 🔬

Precise, smooth SLA, LCD and DLP parts need more than a printer:

🧪 01 – The right resin, stored away from light under controlled temperature
🫧 02 – IPA wash, with spent resin and solvent collected and disposed of to EU standards
😷 03 – Extracted workspace, nitrile gloves, eye and respiratory protection
💡 04 – UV post-cure with validated time and temperature, where the final mechanical properties are set

You can set all of this up in-house.
Or you can send us the file and receive the finished part. 📦

👉 Need a resin part? Send us your file: link in bio / fastparts.it

02/10/2026

A filamento non escono. In SLS sì. 🔍

In reparto è arrivata una RMS220 di Raise3D Technologies : stampa 3D SLS, a polvere.

Niente supporti, quindi forme che prima non si potevano stampare:
🔹 canali interni curvi
🔹 reticoli leggeri al posto del pieno
🔹 snodi e cerniere che escono già montati
🔹 un pezzo o un lotto nella stessa stampa, e più pezzi ci sono, meno costa ciascuno

E nessun verso debole: dove il filamento si apre tra gli strati, il pezzo SLS resiste quasi uguale in ogni direzione.

Materiali:
⚙️ PA12 per i pezzi funzionali
⚙️ PA12 caricato vetro per rigidità e stabilità
⚙️ TPU per quello che deve piegarsi e tornare com'era

Area di stampa 220 × 220 × 350 mm. Sabbiatura e, se serve, verifica dimensionale.

👉 Hai un pezzo che a filamento non esce? Ce ne occupiamo noi.
📤 Giralo a chi progetta nel tuo ufficio tecnico.

Indirizzo

Ruvo Di

Orario di apertura

Lunedì 09:00 - 13:00
15:00 - 17:00
Martedì 09:00 - 13:00
15:00 - 17:00
Mercoledì 09:00 - 13:00
15:00 - 17:00
Giovedì 09:00 - 13:00
15:00 - 17:00
Venerdì 09:00 - 13:00
15:00 - 17:00

Sito Web

Notifiche

Lascia la tua email e sarai tra i primi a sapere quando FastParts pubblica novità e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.

Contatta L'azienda

Invia un messaggio a FastParts:

Scelte rapide

Condividi

Categoria

Altri risultati: società di ingegneria a Ruvo di Puglia

Vedi Tutto