Adinox

Call Website Contact the business

Adinox A leading company specializing in advanced adhesive solutions.

We provide high-performance methyl methacrylate (MMA) adhesives, polyurethane sealants, MS hybrid adhesives, instant adhesives, application tools, and more. Somos una empresa especializada en adhesivos industriales para metales, nuestras soluciones abarcan sectores como la industria aeroespacial, automotriz, metalmecánica, industria gráfica, energía y construcción. Nuestros sistemas representan uno de los métodos de ensamble más innovadores, versátiles y confiables, gracias a su compatibilidad con materiales, facilidad de aplicación y parámetros de resistencia.

07/08/2026

Bond stainless without welding.
ADINOX® M425 is a two-part toughened structural adhesive with outstanding impact and thermal-cycling resistance. Primer-free adhesion on stainless — over 21 MPa lap shear, cohesive failure.

Contact your nearest distributor https://www.adinoxadhesives.com/r/SMF

06/08/2026

ADINOX® C50 — Low-bloom, low-odor instant adhesive for clear plastics.
Bonding clear plastics (acrylic, PMMA, transparent parts) with a standard instant adhesive leaves a white haze around the joint. On a clear substrate that haze is highly visible — and it ruins the finish that specified the material in the first place.
ADINOX® C50 is engineered around a low-bloom, low-odor formulation. High viscosity (1,200–1,500 cP) means it does not sag on vertical joints and it fills gaps for high-precision assemblies. Viable for enclosed assembly areas.
Applications: signage, displays, electronics assembly, mica, visible bond lines where finish matters.
Find a distributor · https://www.adinoxadhesives.com/r/PKi

29/07/2026

Caption
ADINOX® M422 — Flexible structural bond on stainless steel.

Rigid structural adhesives crack under flex, vibration, or impact. ADINOX® M422 is engineered differently: it's a two-part, gray, flexibilized structural adhesive that combines high shear strength with 100% elongation.

Result: bonds hold on visible stainless steel where welding causes distortion or heat marks. Ideal for architectural railings, designer furniture, marine rails, and structural signage.

Gap-filling up to 9 mm · thixotropic · 10:1 mix ratio · handling strength in 10–15 minutes · service range -40 to 121 °C.

Contact your nearest distributor.
https://www.adinoxadhesives.com/r/qhV

28/07/2026

Instant adhesive activator: cure on demand.
ADINOX® 712 sprays before or after your instant adhesive. Cures the squeeze-out. Bonds on vertical joints and porous substrates where a standard instant adhesive stays tacky.
Flash-off in about 25 seconds. Cycle time back on track.
Contact your nearest distributor - https://www.adinoxadhesives.com/r/SvC

22/06/2026

Wet surface. No primer. No waiting.
ADINOX S70 is a primerless sealant that cures with atmospheric moisture — so a wet surface doesn't slow it down. As an instant grab sealant it gives extremely high initial tack: instant fixation, no tapes or supports. A flexible adhesive sealant (100–200% elongation) that bends with the joint instead of cracking. A weatherproof sealant with excellent water, saltwater and UV resistance — it can even be applied underwater. A silicone free sealant with zero solvents and zero isocyanates.
https://www.adinoxadhesives.com/r/Iro

17/06/2026

Joining carbon fiber by drilling it? Every hole is a stress concentration and a delamination origin.
ADINOX M425 bonds it with zero holes — a toughened two-part structural adhesive built for carbon fiber bonding and composite bonding. No drilling. No rivets.
On composite, the fiber tears before the bond does.
Learn more: https://www.adinoxadhesives.com/r/AfA

15/06/2026

Galvanized steel defeats most adhesives. Not M480. 🔩

The zinc coating creates a chemical barrier. Most systems can't pe*****te it without sanding, grinding, or priming.

ADINOX M480: no sandpaper, no primer. >18 MPa on galvanized steel. Substrate failure — the metal yields before the bond does.

🔗 https://www.adinoxadhesives.com/r/LQD

04/06/2026

Instant cure. No clamps. No fixtures. No waiting.

ADINOX® C388 was engineered for the substrates that defeat most adhesives:
→ Rubber- Nitrile Rubber- Neoprene- PVC- ABS- Aluminum- Carbon Steel- Polycarbonate

When the substrate tears before the bond breaks — that’s when you’ve bonded correctly.

- Tensile strength >24 MPa (>3,480 PSI)
- Flexible bond line
- Black finish — invisible on dark parts
- Instant cure, no mixing

Find a distributor near you 👇
https://www.adinoxadhesives.com/r/S7o


Address


Opening Hours

Monday 09:00 - 18:30
Tuesday 09:00 - 18:30
Wednesday 09:00 - 18:30
Thursday 09:00 - 18:30
Friday 09:00 - 18:30
Saturday 09:00 - 14:00

Telephone

+523314322545

Website

Alerts

Be the first to know and let us send you an email when Adinox posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Adinox:

Shortcuts

  • Want your business to be the top-listed engineering company?

Share