MAGS Engineering

17/08/2026

17/08/2026

🚨 ADVANCED PRESSURE SAFETY VALVE SIZING – STAGE 2 TRAINING 🚨

Mags Engineering Limited is pleased to announce our Pressure Safety Valve (PSV) Sizing – Stage 2 professional training, designed for engineers who want to develop deeper, practical competence in advanced pressure relief system design and PSV sizing.

This intensive 10-day training moves beyond the fundamentals and focuses on real operating and emergency-relieving scenarios commonly encountered in oil & gas, petrochemical, refining, chemical, and process industries.

Participants will gain practical knowledge in:
✅ Review of PSV Sizing Stage 1
✅ Gas/Vapor PSV Sizing – Critical Flow
✅ Gas/Vapor PSV Sizing – Subcritical Flow
✅ Backpressure evaluation
✅ Steam Relief PSV Sizing
✅ Liquid PSV Sizing
✅ Thermal Relief Valve (TRV) Sizing
✅ Fire Case PSV Sizing
✅ Blocked Liquid Discharge Sizing
✅ Relieving load determination
✅ PSV Datasheet preparation and review
✅ PSV sizing verification using Aspen HYSYS
✅ Practical engineering calculations and real project case studies

The training will also address common engineering challenges, including PSV undersizing, oversizing, incorrect scenario selection, relieving-condition determination, backpressure effects, and operational failures.

📚 Applicable Standards:
API RP 520 | API RP 521 | API 526 | ASME Section VIII
📅 Training Date: 28 August – 6 September 2026
⏱️ Duration: 10 Days
💰 Training Fee: ₦350,000 / $250

🌐 Website: https://lnkd.in/dq99--dG
📧 Email: [email protected]

If you are a process engineer, process safety engineer, mechanical engineer, project engineer, design engineer, operations engineer, or technical professional involved in pressure relief systems, this training is designed to strengthen your ability to confidently perform and review PSV sizing calculations for real engineering projects.

🎯 Move beyond PSV fundamentals. Learn how to size relief valves for complex real-world scenarios with sound engineering judgment.

Reserve your seat today.

17/08/2026

🚨 PROFESSIONAL TRAINING OPPORTUNITY | PRESSURE SAFETY VALVE SIZING – STAGE 1

Mags Engineering Limited is pleased to announce our upcoming Pressure Safety Valve (PSV) Sizing – Stage 1 training program, designed for engineers and technical professionals who want to strengthen their practical knowledge of pressure relief system design and PSV sizing.
Pressure safety valves are critical protection devices in oil & gas, petrochemical, chemical, and process facilities. Proper PSV selection and sizing are essential for protecting personnel, equipment, and plant assets against overpressure scenarios.

During this intensive training, participants will gain practical knowledge of:
✅ PSV fundamentals, terminology and operating principles
✅ API and ASME codes and standards
✅ PSV components and selection criteria
✅ Identification of credible overpressure scenarios
✅ Gas and v***r PSV sizing calculations
✅ PSV sizing using simulation software
✅ Preparation and interpretation of PSV datasheets
✅ Practical engineering examples and real project case studies
📅 Training Date: 21st – 25th August 2026
⏱️ Duration: 5 Days
💰 Training Fee: ₦180,000 / $150
This program is suitable for process engineers, mechanical engineers, piping engineers, safety engineers, project engineers, graduate engineers, and other professionals involved in process plant design and operations.

🌐 Website: https://lnkd.in/dq99--dG
📧 Email: [email protected]
If you are looking to develop practical PSV sizing competency that can be applied in FEED, detailed engineering, EPC projects, and plant operations, this training is for you.

Reserve your seat today.

17/08/2026

🚀 MASTER PROCESS MODELING & SIMULATION WITH ASPEN HYSYS
Are you a process engineer, chemical engineer, petroleum engineer, oil & gas professional, graduate, or engineering student looking to strengthen your practical process simulation?

Join our intensive 10-day virtual training on Introduction to Process Modeling/Simulation using Aspen HYSYS and gain hands-on experience with one of the industry’s leading tools for process design, simulation, optimization, feasibility studies, and troubleshooting.
📅 Start Date: 31st August 2026
⏳ Duration: 10 Days
💻 Delivery: Virtual
💰 Training Fee: ₦180,000 / $200
🎓 BONUS: Aspen HYSYS User Certification preparation included FREE

🔥 WHAT YOU WILL LEARN
Participants will learn how to build, analyze, and optimize steady-state process models for oil & gas facilities, refineries, LNG plants, and chemical processing facilities.
✅ Aspen HYSYS User Certification Preparation
🏭 REAL-WORLD CASE STUDY 1 - Simulation of a Crude Oil Processing Plant
❄️ REAL-WORLD CASE STUDY 2 - Feasibility & Conceptual Design of an LNG Plant

Go beyond basic simulation and explore the conceptual design of LNG facilities using technologies associated with major industry licensors, including:
🔹 Air Products
🔹 ConocoPhillips
🔹 Linde Engineering
🔹 Shell
🔹 Black & Veatch
🔹 Honeywell/UOP
Participants will evaluate:
• Feed Gas Treatment
• Refrigeration & Liquefaction Systems
• Fractionation
• LNG Production
• Energy Consumption
• Refrigeration Duties
• Technology Selection
• Heat & Material Balances
• Process Configuration Comparison
• Conceptual Design Optimization

You will learn how simulation results can support technology screening, feasibility studies, conceptual engineering, process optimization, and preparation for FEED.
🎯 Ideal For:

Process Engineers | Chemical Engineers | Petroleum Engineers | Production Engineers | Project Engineers | Plant Engineers | Engineering Graduates | Final-Year Students | Oil & Gas Professionals
📩 Registration - https://lnkd.in/eTnniC6E

Take your Aspen HYSYS skills beyond basic simulation and learn how process models are applied to real engineering projects and investment decisions.

14/07/2026

Dear Participant,

This is a friendly reminder that your Mags Engineering Limited Executive Specialization Programs Scholarship Examination will commence in one hour.

Examination Details

Time: 4:00 PM (WAT)
Platform: Zoom

Before joining, please ensure that you:

* Join the meeting at least 10 minutes before the scheduled start time.
* Have a stable internet connection.
* Keep your camera switched on throughout the examination.
* Participate from a quiet location free from distractions.
* Have your writing materials ready.

The examination will cover:

* Basic English
* Basic Mathematics
* Basic Engineering Questions

We encourage you to remain calm, read each question carefully, and do your best.

We wish you every success and look forward to your participation.

Kind regards,

Mags Engineering Limited
Training & Professional Development Team

14/07/2026

Dear Participant,

Thank you for your interest in the Mags Engineering Limited Executive Specialization Programs and for applying for our Scholarship Opportunity.

We are pleased to inform you that the Scholarship Examination has been scheduled as follows:

Date: Tuesday 14th July
Time: 4:00 PM (WAT)
Platform: Zoom

The examination will consist of:

Basic English
Basic Mathematics
Basic Engineering Questions

To ensure a smooth examination process, kindly observe the following requirements:

✅Join the Zoom meeting at least 10 minutes before the examination begins
✅Ensure you have a stable and reliable internet connection throughout the examination.
✅Your video camera must remain switched on for the entire duration of the examination.
✅Participate from a quiet environment with no background noise or distractions.
✅Have writing materials available if required during the assessment.

Following the examination, your performance will be evaluated, and your scholarship award will be determined based on your score. Your scholarship result and applicable tuition discount will be communicated to you via email.

Scholarship Grading:

✅50%–60% Score: Eligible for a 40% tuition discount
✅75% and Above: Eligible for a 60% tuition discount

We encourage you to prepare well and take advantage of this opportunity to earn a substantial scholarship toward your professional development.

The Zoom meeting link and any additional examination instructions will be sent to you before the scheduled examination.

We wish you every success and look forward to your participation.

Join the specialization official WhatsApp group for more information

https://chat.whatsapp.com/I2mGwn4VBHwI7g0KdehGIi?mode=gi_t

Kind regards,
Mags Engineering Limited
Training & Professional Development Team

09/07/2026

Your Degree Opened the Door… But Is It Enough?

Engineering is changing rapidly, and so are the skills employers are looking for.

While your degree provides a strong foundation, developing practical, industry-relevant skills can help you stand out and prepare for real-world engineering challenges.

At MAGS Engineering Limited, our Executive Specialization Programs are designed to bridge the gap between classroom knowledge and industry practice.

Specialization Areas:
✅ Front-End Engineering Design (FEED)
✅ Process Design
✅ HAZOP
✅ 3D Modelling
✅ SCADA
✅ Plant Engineering

Whether you’re a fresh graduate, currently serving your NYSC, or an experienced engineer looking to upskill, investing in continuous learning is an investment in your future.

Which of these engineering specializations would you love to master, and why? Tell us in the comments!

Ready to take the next step? Send us a message to learn more about our Executive Specialization Programs.

29/06/2026

Looking to build a career in Material Engineering?

Join the MAGS Engineering Executive Specialization Program and gain practical skills that are highly valued across the oil & gas, petrochemical, energy, and manufacturing industries.

✅ 3 Months Intensive Training
✅ Hands-On Practical Learning
✅ Industry-Focused Curriculum
✅ Learn from Industry Experts
✅ Executive-Level Specialization

Learn how to make the right material selection decisions for engineering systems, improve asset reliability, manage corrosion risks, and develop industry-standard engineering deliverables.

Whether you’re a graduate, material engineer, corrosion engineer, process engineer, design engineer, or industry professional, this program is designed to help you grow your expertise and stand out in the industry.

Explore the Executive Specialization Programs:
https://magsengineeringlimited.com/training/executive-specialization-programs

Apply for the Scholarship Assessment:
https://forms.gle/J26jEjETPzvAR5258

📢 Application is now open.

Take the next step toward becoming a more skilled and industry-ready engineering professional.

26/06/2026

Ready to level up your Mechanical Engineering skills?

Join the MAGS Engineering Executive Specialization Program and gain practical, industry-relevant training designed to prepare you for real engineering challenges.

✅ 3 Months Intensive Training
✅ Hands-On Practical Learning
✅ Industry-Focused Curriculum
✅ Learn from Industry Experts
✅ Executive-Level Specialization

Whether you’re a graduate, mechanical engineer, design engineer, maintenance engineer, plant operator, or technical professional, this program is built to help you grow your expertise and boost your career opportunities.

Learn mechanical design, drafting, 3D modeling, pumps, compressors, heat exchangers, inspections, FEED deliverables, and much more.

Explore the Executive Specialization Programs:
https://magsengineeringlimited.com/training/executive-specialization-programs

Apply for the Scholarship Assessment:
https://forms.gle/J26jEjETPzvAR5258

📢 Application is now open.

Don’t miss this opportunity to learn from industry experts and build skills that matter.