SDC Verifier

Name: SDC Verifier
Address: Zijlvest, Haarlem, 2011VB, NL
Telephone: +31153010310

Startpagina
Nederland
Haarlem
SDC Verifier

SDC Verifier is the all-in-one software solution for structural engineers.

Streamline your design, analysis, and verification processes with our powerful tools and seamless integration with popular FEA software.

29/05/2026

𝗦𝗽𝗿𝗶𝗻𝗴 𝟮𝟬𝟮𝟲 𝗶𝗻 𝗠𝗼𝘁𝗶𝗼𝗻: 𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿 𝗔𝗰𝗿𝗼𝘀𝘀 𝗚𝗹𝗼𝗯𝗮𝗹 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝗘𝘃𝗲𝗻𝘁𝘀

April and May turned into an intense stretch for the SDC Verifier team, and we’re genuinely glad we could take part in so many events across offshore, wind, simulation, and digital engineering communities.

𝗛𝗲𝗿𝗲’𝘀 𝘄𝗵𝗲𝗿𝗲 𝘄𝗲 𝘄𝗲𝗿𝗲 𝗽𝗿𝗲𝘀𝗲𝗻𝘁 👇
• International Offshore Crane and Lifting Conference
• WindEurope Annual Event 2026
• PLM Components Innovation Conference 2026
• Offshore Technology Conference 2026 (OTC)
• Tae Sung Tech Summit 2026 (TSTS)
• Seanergy 2026
• TOC Europe 2026
• SymCon 2026

A dense couple of months, a lot of travel, and even more valuable technical discussions.

Looking forward to continuing these conversations throughout the year.

28/05/2026

𝗘𝗱𝗴𝗲 𝗦𝘁𝗿𝗲𝘀𝘀 𝗠𝗲𝘁𝗵𝗼𝗱 𝗼𝗿 𝗘𝗹𝗲𝗺𝗲𝗻𝘁 𝗔𝘃𝗲𝗿𝗮𝗴𝗲? 𝗪𝗵𝗶𝗰𝗵 𝗼𝗻𝗲 𝗮𝗰𝘁𝘂𝗮𝗹𝗹𝘆 𝗴𝗶𝘃𝗲𝘀 𝗺𝗼𝗿𝗲 𝗮𝗰𝗰𝘂𝗿𝗮𝘁𝗲 𝗽𝗹𝗮𝘁𝗲 𝗯𝘂𝗰𝗸𝗹𝗶𝗻𝗴 𝗿𝗲𝘀𝘂𝗹𝘁𝘀? 👇

Our engineers made a benchmark, which compares two stress evaluation approaches in 𝗕𝗩 𝗡𝗥𝟲𝟭𝟱 (𝟮𝟬𝟮𝟯) 𝗽𝗹𝗮𝘁𝗲 𝗯𝘂𝗰𝗸𝗹𝗶𝗻𝗴 𝗮𝗻𝗮𝗹𝘆𝘀𝗶𝘀 and shows how identical stress fields can still lead to different utilization factors when edge stress distribution is considered.

𝘚𝘤𝘳𝘰𝘭𝘭 𝘵𝘩𝘦 𝘤𝘢𝘳𝘰𝘶𝘴𝘦𝘭 𝘵𝘰 𝘴𝘦𝘦 𝘵𝘩𝘦 𝘥𝘦𝘵𝘢𝘪𝘭𝘴 👉

🔗 Want the full breakdown and validation details? 𝗥𝗲𝗮𝗱 𝘁𝗵𝗲 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲 𝗯𝗲𝗻𝗰𝗵𝗺𝗮𝗿𝗸 𝗼𝗻 𝗼𝘂𝗿 𝘄𝗲𝗯𝘀𝗶𝘁𝗲: https://shorturl.at/RFAHB

27/05/2026

⚠️ 𝗔𝗽𝗽𝗿𝗼𝘅𝗶𝗺𝗮𝘁𝗲𝗹𝘆 𝟴𝟬% 𝗼𝗳 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗮𝗹 𝗮𝗻𝗱 𝗺𝗲𝘁𝗮𝗹 𝗰𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁 𝗳𝗮𝗶𝗹𝘂𝗿𝗲𝘀 𝗶𝗻 𝗰𝗿𝗮𝗻𝗲𝘀 𝗮𝗿𝗲 𝗮𝘁𝘁𝗿𝗶𝗯𝘂𝘁𝗲𝗱 𝘁𝗼 𝗳𝗮𝘁𝗶𝗴𝘂𝗲.

And the dangerous part? Fatigue failure often develops silently.

Unlike overload, fatigue damage accumulates gradually under repeated load cycles:
• lifting and lowering operations
• vibration and dynamic effects
• acceleration and braking

Even when stresses remain below the material yield strength, microscopic cracks can still initiate and grow over time.

For 𝗵𝗲𝗮𝘃𝘆 𝗹𝗶𝗳𝘁𝗶𝗻𝗴 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲𝘀, this creates a major safety risk because fatigue cracks typically appear in:
• welded joints
• connections
• cutouts
• stress concentration zones

If undetected, these cracks can eventually lead to sudden structural failure. That is why fatigue analysis is essential for cranes and other cyclically loaded steel structures. You also need to continuously prevent and monitor your structures through 𝗿𝗼𝘂𝘁𝗶𝗻𝗲 𝗶𝗻𝘀𝗽𝗲𝗰𝘁𝗶𝗼𝗻𝘀 and 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗮𝗹 𝗵𝗲𝗮𝗹𝘁𝗵 𝗺𝗼𝗻𝗶𝘁𝗼𝗿𝗶𝗻𝗴 𝘀𝘆𝘀𝘁𝗲𝗺𝘀.

One of these is 𝗦𝗗𝗖 𝗦𝗔𝗠, which centralizes all asset data (inspections, FEA results, and monitoring history) into one live dashboard, helping you quickly identify critical areas, prioritize inspections, and decide what requires immediate actions.

🔍𝗟𝗲𝗮𝗿𝗻 𝗺𝗼𝗿𝗲 𝗮𝗯𝗼𝘂𝘁 𝗦𝗗𝗖 𝗦𝗔𝗠 𝗵𝗲𝗿𝗲 𝗳𝗼𝗿 𝗽𝗿𝗼𝗽𝗲𝗿 𝗵𝗲𝗮𝗹𝘁𝗵 𝗮𝘀𝘀𝗲𝘁 𝗺𝗮𝗻𝗮𝗴𝗲𝗺𝗲𝗻𝘁: https://shorturl.at/5b4qm

25/05/2026

𝗘𝘃𝗲𝗿 𝗻𝗲𝗲𝗱𝗲𝗱 𝘁𝗼 𝗾𝘂𝗶𝗰𝗸𝗹𝘆 𝘃𝗲𝗿𝗶𝗳𝘆 𝘀𝗲𝗰𝘁𝗶𝗼𝗻 𝗽𝗿𝗼𝗽𝗲𝗿𝘁𝗶𝗲𝘀 𝗱𝘂𝗿𝗶𝗻𝗴 𝗲𝗮𝗿𝗹𝘆 𝗱𝗲𝘀𝗶𝗴𝗻 𝗮𝗻𝗮𝗹𝘆𝘀𝗶𝘀?

Modern FEA software already calculates moment of inertia automatically, but engineers still need fast independent checks to validate section properties, verify software output, or perform quick preliminary calculations when full analysis tools are not available.

That’s why 𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿 created a 𝗳𝗿𝗲𝗲 𝗠𝗼𝗺𝗲𝗻𝘁 𝗼𝗳 𝗜𝗻𝗲𝗿𝘁𝗶𝗮, 𝗖𝗲𝗻𝘁𝗿𝗼𝗶𝗱, 𝗮𝗻𝗱 𝗦𝗲𝗰𝘁𝗶𝗼𝗻 𝗠𝗼𝗱𝘂𝗹𝘂𝘀 𝗖𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗼𝗿 for practical engineering work.

It instantly computes key cross-sectional properties for common shapes like 𝘐-𝘴𝘦𝘤𝘵𝘪𝘰𝘯𝘴, 𝘤𝘩𝘢𝘯𝘯𝘦𝘭𝘴, 𝘢𝘯𝘨𝘭𝘦𝘴, 𝘤𝘪𝘳𝘤𝘶𝘭𝘢𝘳 and 𝘩𝘰𝘭𝘭𝘰𝘸 𝘱𝘳𝘰𝘧𝘪𝘭𝘦𝘴, without setup, spreadsheets, or login barriers.

The calculator provides accurate values for moments of inertia, centroid coordinates, section modulus, radius of gyration, torsional properties, and more.

𝗧𝗵𝗲 𝗴𝗼𝗮𝗹 𝗶𝘀 𝘀𝗶𝗺𝗽𝗹𝗲: help engineers perform fast preliminary checks and use section properties with confidence.

𝗧𝗿𝘆 𝘁𝗵𝗲 𝗰𝗮𝗹𝗰𝘂𝗹𝗮𝘁𝗼𝗿, 𝗶𝘁’𝘀 𝗰𝗼𝗺𝗽𝗹𝗲𝘁𝗲𝗹𝘆 𝗳𝗿𝗲𝗲 𝗮𝗻𝗱 𝗿𝗲𝗾𝘂𝗶𝗿𝗲𝘀 𝗻𝗼 𝗹𝗼𝗴𝗶𝗻: https://shorturl.at/bE4oL

20/05/2026

𝗔𝗴𝗶𝗻𝗴 𝗰𝗿𝗮𝗻𝗲𝘀. 𝗙𝗿𝗮𝗴𝗺𝗲𝗻𝘁𝗲𝗱 𝗶𝗻𝘀𝗽𝗲𝗰𝘁𝗶𝗼𝗻 𝗿𝗲𝗰𝗼𝗿𝗱𝘀. 𝗜𝗻𝗰𝗿𝗲𝗮𝘀𝗶𝗻𝗴 𝗽𝗿𝗲𝘀𝘀𝘂𝗿𝗲 𝘁𝗼 𝗲𝘅𝘁𝗲𝗻𝗱 𝗲𝗾𝘂𝗶𝗽𝗺𝗲𝗻𝘁 𝗹𝗶𝗳𝗲𝘁𝗶𝗺𝗲 𝘄𝗶𝘁𝗵𝗼𝘂𝘁 𝗰𝗼𝗺𝗽𝗿𝗼𝗺𝗶𝘀𝗶𝗻𝗴 𝘀𝗮𝗳𝗲𝘁𝘆 𝗼𝗿 𝗰𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝗰𝗲.

Occasional structural analyses and reactive inspections are no longer enough for heavy lifting and port operations.

The real challenge is creating a repeatable workflow where FEA results, inspections, and maintenance actions are connected, helping teams make proactive decisions before failures or costly downtime occur.

That’s exactly what we will discuss during our upcoming webinar:
📅 𝗝𝘂𝗻𝗲 𝟰, 𝟮𝟬𝟮𝟲 | 𝟭𝟲:𝟬𝟬 𝗖𝗘𝗧

🎙 𝗛𝗼𝘀𝘁𝗲𝗱 𝗯𝘆 Roman Samchuk, 𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿’𝘀 𝗛𝗲𝗮𝗱 𝗼𝗳 𝗘𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴

Join us to explore practical approaches to lifetime extension and smart asset management for heavy lifting equipment using 𝗦𝗗𝗖 𝗦𝗔𝗠.

See the full agenda and webinar details on the event page.
𝗗𝗼𝗻’𝘁 𝗺𝗶𝘀𝘀 𝘁𝗵𝗲 𝗰𝗵𝗮𝗻𝗰𝗲 𝘁𝗼 𝘀𝗲𝗰𝘂𝗿𝗲 𝘆𝗼𝘂𝗿 𝘀𝗽𝗼𝘁: https://shorturl.at/1yzEz

19/05/2026

𝗪𝗲’𝗿𝗲 𝗮𝘁 𝗧𝗢𝗖 𝗘𝘂𝗿𝗼𝗽𝗲 𝟮𝟬𝟮𝟲 𝗶𝗻 𝗛𝗮𝗺𝗯𝘂𝗿𝗴 𝗼𝗻 𝗠𝗮𝘆 𝟭𝟵–𝟮𝟭 🚢

Excited to meet port and terminal professionals, discuss structural verification challenges, compliance-ready reporting, and smarter engineering workflows for port equipment and infrastructure.

Meet SDC Verifier’s team at the 𝗯𝗼𝗼𝘁𝗵 𝗔𝟰𝟴: 𝗥𝗼𝗺𝗮𝗻 𝗦𝗮𝗺𝗰𝗵𝘂𝗸, Head of Engineering, together with Structural Engineers 𝗠𝗶𝗰𝗵𝗮𝗹 𝗢𝗹𝗲𝗸𝘀𝘆 and 𝗪𝗼𝗷𝗰𝗶𝗲𝗰𝗵 𝗔𝗯𝗿𝗮𝗵𝗮𝗺𝗶𝗸.

If you’re attending TOC Europe and would like to connect, feel free to visit our booth or reach out to Roman Samchuk on LinkedIn to arrange a meeting. See you in Hamburg!

18/05/2026

𝗜𝗻 𝗙𝗘𝗔 𝗽𝗼𝘀𝘁-𝗽𝗿𝗼𝗰𝗲𝘀𝘀𝗶𝗻𝗴, 𝘀𝗽𝗼𝘁𝘁𝗶𝗻𝗴 𝗮 𝗿𝗲𝗱 𝘀𝘁𝗿𝗲𝘀𝘀 𝗰𝗼𝗻𝘁𝗼𝘂𝗿 𝗶𝘀 𝘂𝘀𝘂𝗮𝗹𝗹𝘆 𝘁𝗵𝗲 𝗲𝗮𝘀𝘆 𝗽𝗮𝗿𝘁 🔍

Figuring out which elements actually govern, and which loads are causing the issue, is where the real challenge begins.

This becomes even more complex in large mixed beam/shell models, where critical regions can look fragmented, overlap visually, or get lost in the full-field view ⚠️

That’s why a 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲𝗱 𝗽𝗲𝗮𝗸 𝗱𝗲𝘁𝗲𝗰𝘁𝗶𝗼𝗻 𝘄𝗼𝗿𝗸𝗳𝗹𝗼𝘄 can make such a difference.

In our new article, we show step by step how to build an efficient peak detection workflow using the 𝗣𝗲𝗮𝗸 𝗙𝗶𝗻𝗱𝗲𝗿 tool in 𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿📊

𝗙𝗼𝗹𝗹𝗼𝘄 𝘁𝗵𝗲 𝗹𝗶𝗻𝗸 𝘁𝗼 𝘀𝗲𝗲 𝗱𝗲𝘁𝗮𝗶𝗹𝘀: https://shorturl.at/B09yR

15/05/2026

We all use 𝗲𝗻𝗴𝗶𝗻𝗲𝗲𝗿𝗶𝗻𝗴 𝘀𝘁𝗮𝗻𝗱𝗮𝗿𝗱𝘀 for structural verification.
But how do they 𝗮𝗰𝘁𝘂𝗮𝗹𝗹𝘆 work? ⚙️

What’s behind allowable stresses, safety factors, buckling checks, and utilization limits?

𝗦𝘄𝗶𝗽𝗲 𝘁𝗵𝗿𝗼𝘂𝗴𝗵 𝘁𝗵𝗲 𝗰𝗮𝗿𝗼𝘂𝘀𝗲𝗹 𝗳𝗼𝗿 𝘁𝗵𝗲 𝗳𝘂𝗹𝗹 𝗲𝘅𝗽𝗹𝗮𝗻𝗮𝘁𝗶𝗼𝗻 👉

14/05/2026

𝗦𝗗𝗖 𝗩𝗲𝗿𝗶𝗳𝗶𝗲𝗿 𝘄𝗮𝘀 𝗶𝗻 𝗦𝗼𝘂𝘁𝗵 𝗞𝗼𝗿𝗲𝗮 𝗮𝘁 𝗧𝗮𝗲 𝗦𝘂𝗻𝗴 𝗧𝗲𝗰𝗵 𝗦𝘂𝗺𝗺𝗶𝘁 𝟮𝟬𝟮𝟲!

Today, our COO, Oleg Ishchuk, was at 𝗧𝗦𝗡𝗘 𝗧𝗲𝗰𝗵 𝗦𝘂𝗺𝗺𝗶𝘁 𝟮𝟬𝟮𝟲 in Seoul. We were glad to be present at such a remarkable event in Korea!

Oleg also held a presentation, "𝘚𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘢𝘭 𝘊𝘰𝘥𝘦 𝘝𝘦𝘳𝘪𝘧𝘪𝘤𝘢𝘵𝘪𝘰𝘯 𝘶𝘴𝘪𝘯𝘨 𝘚𝘋𝘊 𝘝𝘦𝘳𝘪𝘧𝘪𝘦𝘳.” We are always happy to share our knowledge and experience with engineers.

12/05/2026

𝗝𝘂𝘀𝘁 𝟭 𝗱𝗮𝘆 𝗹𝗲𝗳𝘁 👇

The webinar is coming up soon, so make sure you don’t miss your spot for “𝗦𝗶𝗺𝘂𝗹𝗮𝘁𝗶𝗻𝗴 𝗛𝗶𝗱𝗱𝗲𝗻 𝗦𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗮𝗹 𝗥𝗶𝘀𝗸𝘀 𝗶𝗻 𝗪𝗶𝗻𝗱 𝗧𝘂𝗿𝗯𝗶𝗻𝗲 𝗦𝘂𝗽𝗽𝗼𝗿𝘁 𝗦𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗲𝘀” hosted by SDC Verifier.

We’ll look at why global FEA checks often miss critical local fatigue and stability effects, and how to catch them before they become costly issues.

🗓 𝗠𝗮𝘆 𝟭𝟯, 𝟮𝟬𝟮𝟲 – 𝟭𝟲:𝟬𝟬 𝗖𝗘𝗧
👉 𝗥𝗲𝗴𝗶𝘀𝘁𝗲𝗿 𝗵𝗲𝗿𝗲: https://shorturl.at/ZnGOi

See you there.

Adres

Zijlvest
Haarlem
2011VB

Telefoon

+31153010310

Website

https://sdcverifier.com/

Meldingen

Wees de eerste die het weet en laat ons u een e-mail sturen wanneer SDC Verifier nieuws en promoties plaatst. Uw e-mailadres wordt niet voor andere doeleinden gebruikt en u kunt zich op elk gewenst moment afmelden.

Wilt u dat uw bedrijf hét hoogst genoteerde Ingenieursbureau in Haarlem wordt?