Mühendisliğe Dair

Website

Mühendisliğe Dair 📍Mühendisliğe dair her şey bu sayfada!
Everything about engineering is on this page!

05/10/2026

Wow! 🔥

04/10/2026

Soldering machine ⚡️👏

03/10/2026

Can you read a PCB? 👀⚡️

03/10/2026

Both of these sensors detect objects. So why use a frame sensor instead of a fork sensor?
With a frame sensor, the detection area is inside the sensor’s frame. An object simply needs to pass through and interrupt this detection field.
In a fork sensor, the emitter and receiver are integrated into opposite sides of the same housing. When an object passes between the two arms, it interrupts the beam.
The real difference is the application. Fork sensors are especially practical for detecting small parts, labels and objects passing through a narrow, defined area.
A frame sensor, on the other hand, can be advantageous when a larger detection area is needed.
Another advantage is installation. With a fork sensor, you don’t need to align a separate emitter and receiver.
So the choice isn’t really about which one is better. It’s about which one fits your application.”

01/10/2026

The sensor works perfectly… so why does it struggle with shiny metal?
A laser sensor measures distance by sending light toward a surface and analyzing the returned signal.
But when the surface is highly reflective, the light can bounce away in different directions instead of returning cleanly to the sensor.
And if the sensor angle changes, the reflected light can completely miss the receiver.
Even with the same metal, surface brightness, roughness and texture can affect the measurement.
That’s why sensor selection isn’t just about measurement range. The target surface and mounting angle matter too.
So the sensor may not be faulty. Sometimes, the problem is the surface the laser is looking at.

30/09/2026

The servo motor is in the correct position… so why is it still vibrating?
The first thing you might suspect is a faulty motor. But often, the problem isn’t the motor.
A servo system constantly measures position, compares it with the target, and repeatedly corrects the motor.
If the PID settings aren’t properly tuned, the system can start oscillating around the target.
And if mechanical resonance is involved, a small vibration can grow into a significant oscillation.
If the load inertia is also mismatched, the motor may not respond the way you expect.
So servo vibration isn’t just about the motor. PID tuning, mechanical resonance and load inertia all need to be considered.
In mechatronics, the problem isn’t always the motor. Sometimes it’s the entire system.

06/01/2026

That’s impressive video 😍
Video credit:

designer technology 3ddesign caddesign mechanicalengineering autodesk
mühendislik engineers engineering mekatronikmühendisliği elektrikelektronikmühendisliği makinemühendisliği likeforlikes followforfollowback 3dmodeling 3d

04/01/2026

Engineering 👩‍💻
Video credit: .co

designer technology 3ddesign caddesign mechanicalengineering autodesk
mühendislik engineers engineering mekatronikmühendisliği elektrikelektronikmühendisliği makinemühendisliği likeforlikes followforfollowback 3dmodeling 3d

Address

Istanbul

Alerts

Be the first to know and let us send you an email when Mühendisliğe Dair posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share