Wyvern Industrial Technology

10/16/2026

What if you could reduce turbine rotor inspection time by up to 90% while improving assembly accuracy?

In aerospace engine manufacturing and MRO, precision is critical. Even small deviations in rotor geometry can lead to excessive vibration, assembly challenges, and costly teardowns.

RPI’s iMAP (Integrated Measurement and Assembly Platform) is engineered to transform how turbine rotors are measured, inspected, and assembled.

Combining high-precision rotary technology with advanced AccuScan™ measurement software, iMAP delivers:

✅ Up to 90% reduction in inspection time compared with traditional methods.

✅ 10× improvement in Gauge R&R for runout measurements over manual systems.

✅ Up to 4,000 measurement points per revolution for detailed circular geometry analysis.

✅ Sub-micron measurement performance for demanding aerospace and power generation applications.

✅ Load capacities up to 35,000 kg, accommodating large turbine components.

But accurate measurement is only part of the solution.

The result? Faster inspections, more predictable rotor assembly, improved quality, and reduced manufacturing and MRO costs.

At Wyvern Industrial Technology, we're proud to represent Rotary Precision Instruments UK Ltd throughout North America, helping manufacturers and MRO facilities implement advanced rotary measurement solutions.

How much time and cost could your operation save by optimizing rotor measurement and assembly? Let's discuss more at wyvernamerica.com/contact/

10/02/2026

Is rotary-axis error affecting your measurement uncertainty?

Rotary table coning—also known as tilt error motion—is the angular deviation of a rotary axis as it rotates. Instead of the axis maintaining a perfectly consistent orientation, it describes a small cone-like motion around its nominal axis.

09/19/2026

has been filled with great conversations and an opportunity for our team at Wyvern Industrial Technology to showcase our measurement systems for cleanliness testing, the inspection of circular and angular geometry along with systems for metrology integration.

As a specialist supplier of industrial measurement systems we serve the Advanced Engineering sector, Aerospace Manufacturers and MRO facilities, Energy, Automotive, Space and Defense, Metrology OEMs, Calibration Laboratories, and Research Facilities.

09/18/2026

Exploring Process Quality Control Systems with Wyvern Industrial Technology

From ensuring adhesive bonds are strong on aluminum surfaces treated with plasma or laser technology after cleaning with the Surfaspector to identifying how common quality problems such as poor paint adhesion, premature part corrosion and weld spatter can be avoided with cleanliness testing solutions.

09/09/2026

Going to ?

Come see what your eyes can’t.

A surface can look clean and still carry filmic contamination that creates problems downstream.

At , Wyvern Industrial Technology will be showcasing the new generation SITA CleanoSpector — designed for fast, contact-free cleanliness inspection of parts surfaces.

Using fluorescence measurement, the CleanoSpector helps manufacturers detect unwanted filmic contamination such as oils, greases, cooling lubricants and release agents — so cleanliness can be evaluated before critical processes such as bonding, coating and welding.

If part cleanliness affects your process quality, bring your application to booth 134081, and let’s talk about how you can move from “it looks clean” to objective cleanliness measurement.

Message us to schedule a demonstration, or send an email to: [email protected]

09/04/2026

Are you heading to IMTS with an inspection bottleneck to solve?

Whether you’re trying to improve access to complex parts on a CMM or bring high-accuracy circular geometry inspection closer to production, we offer rotary measurement solutions designed around the application.

QuadScanDUO helps extend CMM capability with dual-axis rotary positioning for complex components.

GeoInspec provides dedicated circular geometry inspection for measurements including roundness, runout, flatness, parallelism, eccentricity, and concentricity—even in shop-floor environments.

Connect with Wyvern Industrial Technology at IMTS to discuss your measurement application and see which solution makes sense for your process.

08/11/2026

Find the Particles Before They Cause a Failure

Talk with Wyvern Industrial Technology about a particle-analysis system for your components, process, or laboratory.

Request a Consultation:

Detect, extract, measure, and document harmful particles with PartSens, the CC G4 cleanliness cabinet, and ParticleView analysis systems.

07/16/2026

CMSC 2026 starts Monday! If you're heading to Dallas, discover why this conference remains one of the most valuable events for metrology professionals—and stop by our booth to say hello!

Join team Wyvern at CMSC 2026 in Dallas to explore the latest in industrial metrology, CMMs, 3D measurement, and quality control.

07/09/2026

06/25/2026

Day 3 at the Adhesives & Bonding Expo in Novi, Michigan! We've had some fantastic conversations and are hearing great questions about how our measurement systems can help manufacturers improve process efficiency, enhance quality control, and drive more consistent results.

If you're at the show, stop by Booth 504 to chat with our measurement experts. We'd love to learn about your application and explore how we can help solve your measurement challenges.

Couldn't make it to the show? Contact our team and schedule a meeting to discuss application uses, rental opportunities and/or sending a part for measurement: wyvernamerica.com/contact