A-Plus Heating and Air

10/23/2026

Sinus problems?! Indoor allergies?! Headaches?!

There maybe a bigger issue lurking in your home that is causing these health issues.

Give us a call today for an HVAC inspection if you have concerns about your indoor air quality. We can help you!

10/23/2026

10/23/2026

What’s your indoor air quality look like? Out of sight of mind for most as this could be growing inside your HVAC system! 🦠🦠

This is another important reason to have your system inspected annually to detect problems such as this growth. Fortunately this customer started a maintenance plan and the problem areas were disinfected. Now the unit can be monitored on future visits to address any further action to prevent this from happening again such as adding a UV light.

10/23/2026

Customer called in for a system inspection as they just bought a new house that was constructed less than 5 years ago. Clearly multiple inspections have been performed since it was constructed and this gas leak wasn’t found on any inspection.

Once arriving I smelled a heavy gas presence near the furnace located in the attic. I informed the customer that I was going to perform a leak check. After spraying down the gas fittings outside the cabinet with no leak I turned to inside the furnace and found this leak at the gas valve and adjoining fitting. I informed the customer and replaced the gas fitting, tested with no leak ✅

Leak fixed and another happy customer!

10/23/2026

Always trust the process 🙏🏽🙏🏽❄️🔥

We helped this customer with replacing her Evaporator coil and Air Conditioner. We ran a new copper lineset as the current size was to small and used a line hide gutter to help with the aesthetics.

If your hiring a contractor in any trade and they are not offering before and after pictures, they are not a qualified contractor in my book. Any contractor should be proud of their craft and want to showcase what they are capable of achieving. I’ve been blessed to learn from very qualified individuals and also work alongside some of the best in the industry.

10/23/2026

Some real nice plumbing work found in the upside down world 🙃🙃

I’m sure it was “I got a guy” 😂😂🙄🙄
Must of been a 5:30 on Friday afternoon type of repair.

Thankfully the drywall wasn’t up yet to discover this gem.

10/22/2026

In the market for a mini split?

We got you covered with many different options of equipment to meet any efficiency needs and applications!! 🔥❄️

Here we replaced a not so very old Daikan Mini Split that was installed by a big well known company in the area. The system was leaking at the evaporator coil and this customer has had prior issues with the system while using this other company.

First off, this company installed the mini with no access to the lineset for replacement down the road as the lineset fittings were buried behind the sheet rock as seen in the pictures. Second off, they kinked the lineset when trying to tighten the fittings causing a bad restriction for the system. This would cause poor efficiency and many other issues to the system. Lastly, in one of the photos you can see a small hole shot into the communicating wire that runs to the indoor unit. That is a nail hole……🙄 If this doesn’t scream poor craftsmanship, then I don’t know what does….

Thankfully we were able to fix the lineset and cable inside the wall and provide a future access point. We also raised the outdoor Heat Pump with a wall mounting bracket per customer request to provide a clean look and get it off the ground for protection. And of course can’t forget the surge protector installed at the outdoor disconnect, which the previous contractor failed to install.

10/22/2026

The right and wrong way to install a filter line drier 🙃🙃

10/22/2026

Leak check ✅

10/22/2026

Where do I even start with this HACK…..House for sale, agent scheduled an appointment because the cooling wouldn’t work for both brand new systems.

For starters the gas flexible connector going into the furnace is a code violation and no gas drip leg found for the appliance. Next both filter line driers installed right at the service valves outside when they should be installed closest to the evaporator coil. Plus one filter line drier is installed facing the wrong direction 🙄🙄. Next we have the bundle of mitigation board wires that are connected to nothing, when they should be connected to the furnace control board so that cooling actually works…..Ironically enough the installation guide is sitting right next to the furnace.

Prime example of…..Tell me you don’t know what you’re doing without telling me.

Obviously this customer paid someone/contractor for installing this pile, and now here I am explaining why they shouldn’t have paid a dime for the work that was performed.

Thankfully this type of service visit keeps quality contractors in business 🙏🏽🙏🏽