Shuck's Welding and Fabrication

08/19/2026

If you think our Hit and Miss Engine's are cool you need to look at what goes with them! A 1/8 scale Corn Grinder, but not just any model... this serves a purpose! It is a Desk Organizer or just a standalone model. Complete with a spinning shaft and pulley. This goes great with our 1/8 Scale Engines!

Find it here --> https://www.shuckswelding.com/product-page/18-scale-corn-grinder-desk-organizer-variant

A cool conversation piece that can be displayed standalone or with one of our 1/8 scale hit and miss engines. Complete with a spinning shaft and pulley. we have 2 Variants, one with a solid base and a oil can, and one that is a desk organizer made to hold pins. Made from ABS Plastic.

08/19/2026

Model Engines are now available on our website! We are now offering 1/8 scale models of Hit and Miss engines! Both made completely from scratch with measurements taken by hand, we do not use any 3d scanner or AI Modeling software. The models are of Stover and Economy Engine's. They are great shelf or desk pieces and will certainly start conversations! Both have rotating flywheels, with the Economy having the crankshaft moving as well.

Find the Economy Here --> https://www.shuckswelding.com/product-page/18-scale-2-12hp-economy-hit-and-miss-engine

Find the Stover Here --> https://www.shuckswelding.com/product-page/18-scale-jaeger-hit-and-miss-engine

08/14/2026

Yesterday you may have seen our post about some metal Hanging Bats, well it was mentioned what we had a small size as well. Here they are, at 9" across vs the 15" of the large size these little guys can fit in smaller areas and you might just be able to scare someone with them. We offer a range of different colors, you can special order even more colors. These little flying guys are waiting for a new home, so pick one up today at www.shuckswelding.com/product-page/small-halloween-hanging-bat and you can have them in time for the spooky season!

08/13/2026

With school starting again it means we are getting closer to Fall, and that means closer to Halloween. If you are starting to look for decorations for the spooky season you need to take a look at these Large Hanging Bats (we have small ones too, but those deserve a post of there own)! Go look at all the color choices we offer and if you want one in a color not listed just let us know! Check them out on our website here --> https://www.shuckswelding.com/product-page/large-halloween-hanging-bat Oh and i forgot to say, they ar on sale for $5 off right now!!

Perfect for halloween decorations, we also make a smaller size! Powder coated to prevent rust! Available in multiple colors!

08/12/2026

Are your tools laying around and hard to find at times? We might just have the fix for your problem, our Power Tool Holder is the perfect addition to your workspace! Whether its in your garage or at your job it is a must have to keep things organized. Compatible with many tool brands, and can be finished in whatever color you like! Check them out on our website --> www.shuckswelding.com/product-page/shop-power-tool-holder

08/11/2026

I think the good was got out of these old fenders, we spruced up this trailer and got it looking almost new again with a nice set of fenders. Our Midwest winters are very hard on trailers from all the salt that is used on the roads. If your trailer fenders look like they have withered away, contact us today to get a quote on a new set! Contact us at 317-209-8526, or on our website --> www.shuckswelding.com/

06/25/2026

Here is a removable ramp that we finished up just the other day. The customer wanted a ramp that would let their pigs get in and out of the livestock trailer easier for 4-H, so this is what we came up with! If you would want something like this yourself head over to our website at www.shuckswelding.com or call at 317-409-8526.

06/23/2026

Pulling the plastic off means another project is done! We will share more about this project later today!

06/08/2026

We had to make this custom replacement fender for this chipper, so if you need a new fender for your chipper let us know! If you want, head over to our website to see what else we can do! Link to the Website—> shuckswelding.com

05/29/2026

We had to reverse engineer the part for these forks, but we got it done no problem and now they are back to lifting things! You can go see what all we have repaired like this on our website --> www.shuckswelding.com/fabrication