Garcia Welding

Garcia Welding Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Garcia Welding, Metal Fabricator, Bandera, TX.

A nice 24’x40’ cover we built this week. This will be a handy spot to store things out of the sun. Give Andy a call to d...
07/22/2026

A nice 24’x40’ cover we built this week. This will be a handy spot to store things out of the sun.

Give Andy a call to discuss your next project!
Andy Garcia: 830-328-3647

Check out this neat project we got to build last week! 24’x18’ cave observation deck out in Tarpley. This deck was built...
05/27/2026

Check out this neat project we got to build last week!

24’x18’ cave observation deck out in Tarpley. This deck was built over a 60’ deep cave so you can stand over it and look down in.

If you have a project on your mind, give us a call to get on the books!

Andy: 830-328-3647

Before and after of the emergency repair on this excavator we worked on yesterday. The arm on the machine was cracked du...
05/16/2026

Before and after of the emergency repair on this excavator we worked on yesterday. The arm on the machine was cracked due to heavy use.

Cracks blown out✅
Cracks ground down✅
Cracks welded out✅

We added additional plate to support the wear and tear at that point.

Give Andy a call for any machine repair needs you may have!

Andy: 830-328-3647

Check out this stunning 40’x48’ horse barn we completed last week! The guys really knocked it out of the park with this ...
03/18/2026

Check out this stunning 40’x48’ horse barn we completed last week! The guys really knocked it out of the park with this one.

This barn features:

6- 12’x12’ stalls. They all have the slam latches installed for convenience when moving horses in and out.

A 12’x12’ feed/tack room with a 3’ walk-through door.

A 12’x12’ wash rack with a center drain. We added square tubing along the wall for tie space.

A 16’ wide breezeway.

There is a 2’ gap between the side walls and the roof to allow extra airflow for our Texas heat! 

We fabricated four 8’ sliding barn doors to close the barn up when needed. We also built brackets to refrain the doors from moving when left open.

We are so grateful for our customers who have trusted us to bring their dreams to life! If you like what you see, feel free to reach out!

Andy Garcia: 830-328-3647

Take a look at this beautiful 36’x36’ horse barn we finished up in Bandera this week. 💥This horse barn features: 3- 12’x...
01/22/2026

Take a look at this beautiful 36’x36’ horse barn we finished up in Bandera this week.

💥This horse barn features:

3- 12’x12’ stalls with 16’ runs

2- 12’x12’ stalls

A 12’x12’ feed/tack room. For convenience, we installed an oversized door going into the feed room from the alleyway. A regular sized 3’ door welcomes you in from the front of the barn.

2- 10’x10’ roll up doors to finish up the barn allowing for warmth in the winter and great airflow in the summer.

Contact us today to get on the books!
📞Andy: 830-328-3647

Recently completed this 25’x 30’ with a 15’ gable extension. This shop features two 10’x 10’ roll up doors with automati...
11/22/2025

Recently completed this 25’x 30’ with a 15’ gable extension. This shop features two
10’x 10’ roll up doors with automatic door openers. If you can dream it, we can build it!

Give us a call for all your metal fabrication needs!
830-328-3647

Address

Bandera, TX
78003

Telephone

+18303283647

Website

Alerts

Be the first to know and let us send you an email when Garcia Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Garcia Welding:

Shortcuts

Share

Category