Hester’s Performance Fabrication

Hester’s Performance Fabrication Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Hester’s Performance Fabrication, Metal Fabricator, Denver, NC.

The front end is complete!! We accomplished the ride height the customer was looking for and it is sitting just right. T...
08/16/2026

The front end is complete!! We accomplished the ride height the customer was looking for and it is sitting just right. Theres just a few saftey features to add and itll be going home. We really appreciate Linton Lankford for trusting us and giving us the opportunity to work on this beautiful truck.

Linton Lankford said he needed it lower so it was easier to get in or something like that. Thats what the customer wants...
08/09/2026

Linton Lankford said he needed it lower so it was easier to get in or something like that. Thats what the customer wants, thats what he gets. Just a few more things to address on this beautiful truck. More updates coming soon!!

We got the Hammer Concepts and Designs wish bone burned in and put on to finish up the rear. We got it sitting within Li...
08/03/2026

We got the Hammer Concepts and Designs wish bone burned in and put on to finish up the rear. We got it sitting within Linton Lankfords request. Now to make the front match the back.

We've made a little progress. Linton Lankford said he wanted it to ride better when he went to the grocery store. We got...
07/26/2026

We've made a little progress. Linton Lankford said he wanted it to ride better when he went to the grocery store. We got the Firepunk Diesel 4-link brackets all braced up and ready to go. Followed up with the Hammer Concepts and Designs Anti Roll Bar. We are waiting on the HC&D wishbone then the rear will be finished up!!

This project is alittle different than most we do. We are fortunate that Linton Lankford has trusted us enough to do jus...
07/22/2026

This project is alittle different than most we do. We are fortunate that Linton Lankford has trusted us enough to do just a few upgrades to this beautiful truck. We have got the Firepunk four link brackets mocked up and ready for some bracing. We are gonna post some updates along the way.

This will be a great race for the whole family!!! A lot of classes for non stop racing action!!
07/15/2026

This will be a great race for the whole family!!! A lot of classes for non stop racing action!!

For the first time ever on July 31st-August 1st, Carolina Cash Days “The OG” Goes Sticky!!!! Normal no prep event gets a change up as before the start of the day we will be prepping the track then going straight into eliminations!!! We’ve got a mix of classes for everyone to enjoy with the Warm Up races & TNT on Friday and Main Event on Saturday evening!!!!

Event is presented by Thornburg Machine and Tin Soldier Race Cars

Gate Fee: $20/Day (Children Under 10 Free)

Classes include:

Friday Night 7/31
Gates Open at 3pm, $20 Gate Fee
Track Hot at 5pm
(If racing in Outlaw 5.30 or Truck Warz, no testing till eliminated)
Outlaw 5.30 & Truck Warz Chip Draw 7:00pm

Outlaw 5.30 OTT Shootout-$100 Entry, 100% PB
Outlaw Truck Warz OTT-$50 Entry, 100% PB
TNT-$20

Saturday Night 8/1
Gate Open at 3pm, $20 Gate Fee
Chip Draw at 5:45pm
First Round by 6:30pm

SC Raceworks Small Tire-$3,000 to Win & Free Entry
Small Tire Second Chance-$100 Entry, 100% PB
Brutal Speed and Tuning Outlaw 5.30-$500 on Top, $200 Entry
Outlaw 5.30 Second Chance-$100 Entry, 100% PB
Pro Tree Motorsports Street Racer 6.30-$250 on Top, $100 Entry
7.00 Index-$100 Entry, 100% PB
8.00 Index-$50 Entry, 100% PB

Class Rules:

SC Raceworks Small Tire
•Door Car Only
•28x10.5 Non W Slick, 28x11.5x15 DOT Bias Ply, or 275/60/15 Drag Radial. 17 inch or larger wheel allowed any size drag radial or drag slick
•Any Power Adder
•Any Transmission
•Any Fuel
•No Wheelie Bars
•AWD OK

Brutal Speed and Tuning Outlaw 5.30
•5.30 Index
•28x10.5 non w or 275/60/15 or smaller unless equipped from the factory on 17in rim or bigger.
•Must be a door car
•No wheelie bars/throttle stops/delay boxes (delay box must be 0’d out)
•No time slips
•AWD allowed

Pro Tree Motorsports Street Racer
•6.30 Index
•28x10.5 non w or 275/60/15 or smaller unless equipped from the factory on 17in rim or bigger.
•Must be a door car
•No wheelie bars/throttle stops/delay boxes (delay box must be 0’d out)
•No time slips
•AWD allowed

7.00 & 8.00 Index
•Any Door Car
•Any Size Tire
•No Throttle Stops

Outlaw Truck Warz
•Must be a factory production truck, suv, or wagon (must have a tailgate)
•Power Adder: Single for gas trucks (twins is considered single), multiple for diesel trucks
•Tire: 28x10.5 Non W, 275/60 Drag Radial, 28x11.5 DOT Bias Ply or Smaller. 4wd or Modern Trucks that came with bigger can run whatever)
•Exterior: Working Headlights & Tail lights, Full bed
•Exhaust: Exit Anywhere
•5.90 cap, no times shown, random chip draw

General Rules:
•Water Burnout Only, 1 Burnout Only (must make smoke, will be given only one more attempt if don’t)
•.400 Pro Tree Start
•First is Worst
•Cross Center (Tire Over Line) DQ
•Hit the Wall DQ
•Chip Drawn Race (Every Round). Pairs Will Be Ran in the Order They’re Drawn.
•Bye Run: If You’re Drawn as the Bye, You Will Be the First Pass of the Round Unless Semis Then You Will Be Second. Chip Drawn Bye Run Does Not Have to Make the Pass, Break Beams Under Power, ETC. If Chip Drawn Bye Makes the Pass, There is NO WAY THEY CAN LOSE. Competition (Broke) Bye Run Must Break the Beams in the Lane They Were Drawn. Competition (Broke) Bye Run Can Not Lose By Given Above Rules

Double Entry Allowed but YOU MUST MAKE THE CALL, WE WILL NOT WAIT ON YOU.

In Case of Issues, You Have 2 Minutes Before the Water Box and 2 Minutes After the Burnout (Must Cross Into Water Box Under Power). Opponent has the Option to Give You His 2 Minutes.

Courtesy Staging in Effect, You’ll be Backed Out Once, Second Time is DQ

By Putting Your Chip in the Bag, You Agree to these Rules set by Race Director Corey Stamper and Race Director has Final Decision.

It’s gonna be a fun night of racing!!
07/09/2026

It’s gonna be a fun night of racing!!

🔥 THURSDAY NIGHT UNDER THE LIGHTS! 🔥

Looking for something fun to do tonight? Come spend your Thursday at Shadyside Dragway!

🏁 Test & Tune
💀 Outlaw 5.30 List
🛻Truck Warz

Whether you’re bringing your ride down the track or just kicking back in the stands, there’s nothing like the sights, sounds, and horsepower of a summer night at the drag strip.

🕕 Gates open at 5 PM
🏎️ Racing until 10 PM
🎟️ Just $15 Admission

Tag your racing buddies and make plans to join us tonight!

📍2149 Honey Haven Farm Rd.
Shelby, NC

06/26/2026

Michael N Amanda Laney getting it done last night in HomeBrew!

This is arguable one of the baddest Lil Gangstas cars around piloted by Michael Laney. We are grateful he has chose us t...
03/25/2026

This is arguable one of the baddest Lil Gangstas cars around piloted by Michael Laney. We are grateful he has chose us to help with some of the Fabrication on HOMEBREW! We are ready to see it action here soon.

Lil Gangstas competitors looking to earn an invite to King of the South at Shadyside Dragway May 21-24 will have a prime opportunity this weekend. The 2nd annual Hoosier RTRA Carolina Gold at Shadyside will feature Lil Gangstas winning $5,000 on top of entry fees, with the top eight cars earning invites to compete for $30k at KotS during the Strange Engineering Ronnie Buff Memorial Weekend.

Had the pleasure of doing a strut tower brace for a beautiful roush charged 2016 mustang. Thank you  Chris Roberts for a...
03/25/2026

Had the pleasure of doing a strut tower brace for a beautiful roush charged 2016 mustang. Thank you Chris Roberts for allowing us to help you out.

Address

Denver, NC

Telephone

+17049995183

Website

Alerts

Be the first to know and let us send you an email when Hester’s Performance Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hester’s Performance Fabrication:

Shortcuts

Share