Britson's Heating Cooling and Efficiency LLC

Britson's Heating Cooling and Efficiency LLC Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Britson's Heating Cooling and Efficiency LLC, Heating, ventilating & air conditioning service, 4225 Fluer Drive #184, Des Moines, IA.

This customer had a gas valve that was failing last winter but I was able to keep it going.  This year the exhaust motor...
01/24/2026

This customer had a gas valve that was failing last winter but I was able to keep it going. This year the exhaust motor got really noisy and eventually failed.
In 2019 another contractor put in a new A/C. Well they used the original cased coil cabinet and placed the taller new evaporator coil into the shorter Cased Coil cabinet, chewed up the sides of the cabinet as the new coil drained in different locations. Well we'll change the entire cased coil when it's time for the 2019 A/C to be replaced.
The original installation used a large return drop ductwork, then installed a 16" x 20" x 1" air filter box. Well the furnace manufacturer required that to be a 20" x 25" return air opening into the original furnace. We've updated the return drop ductwork, added the additional box underneath the furnace to allow for a proper return air opening for the new furnace as well as adding a larger air filter cabinet. We don't just replace equipment we improve the entire installation!

Britson's has helped out another customer in need of new equipment!   Tail end of the summer months the first systems ai...
01/24/2026

Britson's has helped out another customer in need of new equipment! Tail end of the summer months the first systems air conditioner compressor failed electrically. They decided to hold off for spring of 2026 to replace the A/C portion of the system. Well the furnace had other ideas. We also found another of their furnaces was not keeping up to the desired temperature. We found it has a heat exchanger failure that was causing safety switches to trip and need manually reset, but only run for a short time thereafter.
We installed two new furnaces, upgraded the ductwork on the return side to keep the new equipment running efficiently with proper airflow, replaced the entire intake/ exhaust on the first new furnace as it was installed with improper sloping for condensate drainage as well as improper PVC piping as it was intended for waste water drainage not for pressure, and will be replacing intake/ exhaust piping to the second furnace in the near future for the same reason.
We added the new evaporator coil to the first system in order to make the supply side of the ductwork complete and shorten the time it will take to install the new A/C portion of the system in the spring.

Enhance your home's comfort and efficiency with a heat pump mini-split system. These systems are ideal for home addition...
09/18/2024

Enhance your home's comfort and efficiency with a heat pump mini-split system. These systems are ideal for home additions and supplementing existing heating and cooling setups. Boasting a SEER2 cooling rating of 25.5 and an EER2 heating rating of 13.8, these systems provide quiet and efficient operation below 50 decibels. Additionally, the government offers a $2,000 tax credit for their installation. Reach out to Britson's Heating-Cooling and Efficiency, LLC at (515) 316-9769 for a quote or any HVAC needs.

A 120-year-old home with a 30-year-old addition, previously converted to four apartments using a single furnace. It has ...
08/18/2024

A 120-year-old home with a 30-year-old addition, previously converted to four apartments using a single furnace. It has been mandated by the city to separate its ductwork. Installing four furnaces or mini-split systems was not feasible due to the layout and limited breaker panel space. To resolve this, we installed 4 radiators in each apartment and connected them to a new boiler with a four-zone circulation pump controller, enabling independent or simultaneous operation of each zone.

Call Britson's Heating-Cooling and Efficiency, LLC for all your HVAC needs. (515) 316-9769

Client contentment guaranteed! Whether you require a small repair or need new equipment, Britson's is the company to cal...
08/05/2024

Client contentment guaranteed! Whether you require a small repair or need new equipment, Britson's is the company to call.

This homeowner had been smelling gas.  Found four leaks throughout the house.  Removed all gas lines and applied new thr...
03/20/2024

This homeowner had been smelling gas. Found four leaks throughout the house. Removed all gas lines and applied new thread sealant to all connections. Turned the gas meter back on and marked my line on the half foot lbs scale and wouldn't you know it, I've still got a leak. After digging a little bit around the meter and inside the crawlspace I can see a 3/4" union totally covered in concrete! Also found a 1/2" copper tubing coming from the concrete area! Well now what? Homeowner has chosen to risk it and they'll chip away at the concrete and get back to me when I can access the piping.

Go fund my business ๐Ÿ˜‰  It is time to start giving your equipment regular maintenance.  Call today to get your spring che...
02/22/2024

Go fund my business ๐Ÿ˜‰ It is time to start giving your equipment regular maintenance. Call today to get your spring check for $85. Refrigerant levels are checked, electrical components are confirmed ready for the season, and oh my are the condenser coils clean after this service! (515) 316-9769
We also offer maintenance plans starting at $215/ year to keep your system operating properly, efficiently, and safely all year long!

Who puts new parts on this unit without looking over the entire packaged unit? I was asked to just replace the air filte...
01/20/2024

Who puts new parts on this unit without looking over the entire packaged unit? I was asked to just replace the air filters. As I walked away from the unit, the furnace exhaust was running but it was cold. I found the roll-out switch was tripped. Take a look at those rusty seams on the heat exchanger tubes! A previous company had recently replaced the exhaust motor and circuit board. New heat exchanger or a new unit. Somethings got to go! Safety first people!

Engineering at its finest!  ๐Ÿคจ  Let's run a harness of wiring to the burner, gas valve, and flame sensor.  Oh wait we for...
01/20/2024

Engineering at its finest! ๐Ÿคจ Let's run a harness of wiring to the burner, gas valve, and flame sensor. Oh wait we forgot the ignitor! Let's put a hole IN THE MIDDLE OF A PLATE OF METAL ABOVE THE BURNER AREA! All of this was too much for the last guy. The last guy couldn't be bothered to put it all back together again properly. ๐Ÿ˜’
You can hear the spark occurring at the burner and gas smell out of the exhaust pipe. I thought let's pull it all out to see what's the area of ignition look like? That's when I found that the gas valve had frost all over the bottom. Yep, it was time to go sit in the van and warm up! After the gas valve and I were thawed out I reassembled the entire burner area. Another great idea of the engineers was to add a 45 degree elbow on the exhaust pipe, get the exhaust further away from the intake hood. Let's add a 90 degree elbow down off of that 45 degree elbow. Now the exhaust can be at a perfect height to be blown right back into the intake hood. We should place the gas valve right next to the intake hood. I made an engineering decision and removed the second elbow! All is well again. Enjoy your heat everyone.

01/01/2024

Happy New Year!

To bring in the next year we are offering $700 discount on New installations for all of January!

$75 fall maintenance services on existing systems to confirm your equipment is ready for the colder weather ahead.

The cold weather always comes to Iowa. You're better off knowing that your equipment is ready and safe to operate properly than to be without when it is needed most.

Call today for the greatest HVAC services available. Friendly, upfront, honest, and professional.

Address

4225 Fluer Drive #184
Des Moines, IA
50321

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Alerts

Be the first to know and let us send you an email when Britson's Heating Cooling and Efficiency LLC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share