Brunswick Machine & Hydraulics

Brunswick Machine & Hydraulics Machining, welding, fabrication, and hydraulic repair — including hose replacement — serving Brunswick County, VA and surrounding areas.

Fast, reliable custom fabrication and hydraulic hose repair for local farms, businesses, and individuals.

Changing the oil and filter isn't enough. This is why.This is the inside of a hydraulic tank before a full clean. Years ...
08/29/2026

Changing the oil and filter isn't enough. This is why.

This is the inside of a hydraulic tank before a full clean. Years of sludge and varnish build up on the walls, and none of that comes out just from draining the oil and swapping the filter. Fresh oil goes in, picks up what's left behind, and you're back to contaminated fluid within weeks.

A proper service means getting into the tank itself; wiping it down, clearing the buildup, making sure nothing old is left to contaminate the new oil. It takes longer, but it's the difference between a fix that lasts and one that doesn't.

Want to know what else we do at Brunswick Machine and Hydraulics? Check out the first comment with a link to our website.

Old vs. new — hydraulic cooler replacement done right.That's the old hydraulic cooler on the right, worn down after year...
08/28/2026

Old vs. new — hydraulic cooler replacement done right.

That's the old hydraulic cooler on the right, worn down after years of hard use, next to its brand new replacement on the left. Small part, big job, a failing cooler can lead to overheating and bigger problems down the line if it's not caught in time.

Swapped, tested, and back in service. Just another day keeping equipment running the way it should.

This is what happens when a pin decides it's not leaving on its own.You can spend an hour heating it, hammering it, soak...
08/25/2026

This is what happens when a pin decides it's not leaving on its own.

You can spend an hour heating it, hammering it, soaking it in penetrating oil overnight and trying again in the morning. Or you can cut it.

Rusted solid like this, cutting the pin is faster and just as effective as fighting it all afternoon. The cylinder still comes off either way. One way just costs you less of your day.

This valve block runs an entire piece of equipment. Every section you see here controls a different function, and if eve...
08/24/2026

This valve block runs an entire piece of equipment. Every section you see here controls a different function, and if even one of them wears out, the whole machine loses power or starts drifting on you.

Most people assume that means a new block. New ones are expensive and back-ordered for weeks.

Instead, we pull it apart section by section, clean and inspect every bore, replace what's worn, and rebuild it to spec.

The task is finally complete! Everything has been meticulously reassembled, thoroughly cleaned, and is now perfectly pre...
08/22/2026

The task is finally complete! Everything has been meticulously reassembled, thoroughly cleaned, and is now perfectly prepared to be bolted back on.

📍 Brunswick Machine and Hydraulic

Most people never see what's actually turning the machine. This is it, pulled apart and laid out on the bench.
08/21/2026

Most people never see what's actually turning the machine. This is it, pulled apart and laid out on the bench.

Most people think a hydraulic motor dies from being worn out. Most of the time, it's contamination, dirt and debris gett...
08/20/2026

Most people think a hydraulic motor dies from being worn out. Most of the time, it's contamination, dirt and debris getting where it shouldn't and tearing up the internals from the inside. This is what that looks like once you crack it open.

Ever wonder what "we checked it" actually means? This is it. Every tooth on every gear, looked at one by one before it g...
08/19/2026

Ever wonder what "we checked it" actually means? This is it. Every tooth on every gear, looked at one by one before it goes back together…..so one passed and one failed! Do you know which one is bad?

Another one back in service. This hydraulic driven slew gear came in worn down and went back out ready to work, cleaned,...
08/18/2026

Another one back in service. This hydraulic driven slew gear came in worn down and went back out ready to work, cleaned, inspected, and rebuilt to spec.

That's the job: keep the equipment running so your operation doesn't stop.

📍 Brunswick Machine and Hydraulics

Fresh coat of white paint on this one after the rebuild. Cylinder with integrated brake, back together and ready to load...
08/14/2026

Fresh coat of white paint on this one after the rebuild. Cylinder with integrated brake, back together and ready to load out.

Nice to see it looking this clean before it goes back to work.

Address

Gasburg, VA
23857

Telephone

+14342334830

Website

Alerts

Be the first to know and let us send you an email when Brunswick Machine & Hydraulics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Brunswick Machine & Hydraulics:

Shortcuts

Share

Category