BRW Technologies, LLC

06/02/2025

02/04/2025

Kohler K341 cast iron engine, bored .040 and honed, blocked decked, valve seats ground ready for assembly.

We work on these types of engines all the time.

BRW Technologies, LLC brwtechnologies.com

12/31/2024

Do you have a engine that has a Nickesil plated cylinder that needs to be bored? We can machine out the nickesil and put in a cast iron sleeve. This allows the cylinder to be returned back to standard sizes or over-bored. Saves you $$$ money and gets you riding again!

12/31/2024

This what we are doing this week. Kohler K341 cast iron flat head engine out of a concrete saw that we bought a while ago. Bored .030 oversize and decked the block. Valve grinding next, and then ready to measure the crank to see if a standard size rod will work.

12/31/2024

Do you have a tractor or industrial engine that needs the carb rebuilt? We can do that and get you up and running in no time.

12/31/2024

Do you have a snowmobile that needs engine work? We can bore, hone and sleeve motorcycle, jetski, small engines, and snowmobile engines.

check our website at brwtechnologies.com

12/21/2024

Rebuilding a Holley Dominator carb today for a drag race car. Fully tested and ready to go!

12/21/2024

Cut out Nickesil and bored for cast iron sleeve. KTM 2 stroke 250 engine. We can save your modern engines with a cheaper alternative to Nickesil plating.

12/21/2024

Decking and boring a Kohler K341 16hp cast iron engine block today. We never know what will come in next!

11/14/2024

We can bore and hone small engine cylinders, Jetski Cylinders, Motorcycle cylinders, etc. We charge $100 per cylinder to bore and hone. Cost of pistons and gaskets not included, but we can source those parts for you.

Ask us bout shipping!

Need a cylinder sleeved? We can do that too!
BRW Technologies, LLC

11/14/2024

Do you need a Carb rebuild for your boat or classic car? We can rebuild Edelbrock, Holley, Rochester, Motorcraft, and many other carb brands.

We can also rebuild motorcycle and jetski carbs.

11/14/2024

Have a piston blow up in your jetski? Let us re-work the cylinder heads. We also bore and hone cylinders and re-sleeve cylinders. Have a Nickesil plated cylinder, but dont have the money to re-plate? Let us sleeve it with a cast iron sleeve and save you $$$$.

Ask us about shipping.

BRW Technologies, LLC
Greer, SC