Southern Laboratory & Industrial

Call Website Contact the business

Southern Laboratory & Industrial Southern Laboratory and Industrial, Inc.specializes in providing solutions that serve laboratories and various industrial manufacturing facilities.

From purchase and installation to preventative maintenance, we provide a turn-key experience.

What if?....You could support all of your LC-MS instruments with one gas generator ⬇️
09/24/2026

What if?....

You could support all of your LC-MS instruments with one gas generator ⬇️

Adding an instrument or expanding your lab?The right gas supply starts with your instrument’s purity, flow and pressure ...
09/24/2026

Adding an instrument or expanding your lab?

The right gas supply starts with your instrument’s purity, flow and pressure requirements.

Southern Lab & Industrial helps analytical laboratories select LNI — a Velaris brand gas generators for:

• Hydrogen, UHP nitrogen and zero air
• Membrane nitrogen for LC-MS, with or without an integrated compressor

Share your instrument make and model, gas requirements and available utilities. We’ll help identify a configuration that fits your lab.

Schedule a sizing consultation:
https://zurl.co/YAxqt

Questions? Call 713-653-3424.

Heading to Gulf Coast Conference? Let’s talk gas generation at Booth  #101.Join LNI — a Velaris brand — in Galveston on ...
09/16/2026

Heading to Gulf Coast Conference? Let’s talk gas generation at Booth #101.

Join LNI — a Velaris brand — in Galveston on October 13–14 and explore solutions for your laboratory’s hydrogen, nitrogen, and zero-air needs.

In the spotlight: the HG PRO M series hydrogen generator. Bring your application requirements and questions—we’d welcome the opportunity to discuss them with you.

Reserve a time to meet 1-on-1 with at Booth #101
https://zurl.co/wPo1E

📍 Moody Gardens Convention Center • Galveston, TX
📅 October 13–14, 2026 • 9 a.m.–5 p.m.
📌 Booth #101 — exhibiting under Velaris

Stop by and meet our team!
Questions before the show? [email protected]

Need more LCMS grade N2 for your Lab? The NG(A) CASTORE XL iQ 350 splits its capacity two ways: nitrogen for the source,...
09/15/2026

Need more LCMS grade N2 for your Lab?

The NG(A) CASTORE XL iQ 350 splits its capacity two ways: nitrogen for the source, dry air for curtain and drying gas. Useful, unless your lab already has clean instrument air - or your instrument doesn't require dry air at all.

The NG CASTORE XL iQ 350 does not split it.

Same cabinet. Same 7.5 kW three-phase supply. Same touch-screen, RS-485, parallel mode and service counters. One outlet instead of two, and every litre of membrane capacity goes to nitrogen:

350 L/min, LC-MS grade, 8 bar / 116 psi, dew point below -60 deg C.

That is 75 percent more nitrogen than the NG(A) version of the same unit, and roughly 14 LC-MS/MS sources on one supply at 20 L/min each with headroom.

So, the question is not which unit is better. It is whether your instruments need dry air from the generator or not. If they do, NG(A). If your air is already covered, NG 350 and take the N2 flow.

We work that out in the assessment, before anything is quoted.

Free LC-MS nitrogen assessment, link in the first comment.

Swissgas

Ask a national supplier who commissions your generator. The honest answer is usually "you do."That is the actual differe...
08/18/2026

Ask a national supplier who commissions your generator. The honest answer is usually "you do."

That is the actual difference between buying a box and buying a working bench, and it does not show up on the quote.

Here is what an on-site gas project looks like when a local partner runs it with you.

Assess. A Sales Engineer reviews your detectors, your current gas sources and your real flow demand at peak rather than average. Free, and you keep the written specification whether or not you buy anything.

Spec. Model selection with headroom for the instruments you are adding next, not only the ones you are running today.

Commission. On site, once the equipment is placed and connected, verified against specification before anyone relies on it.

Train. Your analysts and facilities team, on the actual unit, not a slide deck.

Support. Preventive maintenance, calibration, parts and service. The part that decides whether year three is uneventful.

Two things stay with you, and we are direct about both. Physical placement and plumbing belong to your facility or your contractor. Method re-establishment belongs to your lab, because your analysts have to be the ones who validate it. We share what we have seen work across other conversions and we are on the phone while you do it.

Same engineer through all five steps.

Link in comments.

Filtration and conversion are not the same thing, and your baseline knows the difference. A filter fills up. A catalyst ...
08/12/2026

Filtration and conversion are not the same thing, and your baseline knows the difference.

A filter fills up. A catalyst does not.

That distinction is the whole reason an on-site zero air generator behaves differently from the carbon trap on your house air line.

A trap adsorbs. It holds hydrocarbons on a bed until the bed is saturated, and then it passes them straight through. You get no warning. The baseline simply starts drifting again, gradually enough that most labs go looking at the column first.

Catalytic oxidation converts. Air passes over a heated platinum-group bed and the hydrocarbons come out the other side as CO₂ and water. Nothing is stored, so nothing saturates.

There is a second difference that catches more labs out. Activated carbon handles C₃ and above reasonably well. It does not remove methane. Methane breaks through a carbon trap within hours to days and reaches the flame, where an FID counts it exactly like any other carbon.

At under 0.05 ppm total hydrocarbons, methane included, your detection limit stops being a function of what the air happened to contain that morning. It becomes a function of your method, which is the only variable in the chain you actually control.

We are running complimentary FID Gas Assessments for a limited time. A Sales Engineer sizes the zero air and hydrogen your bench needs and writes you a specification you keep either way.

Link in comments.

Both of these are the same sample. That is a healthy GC-FID, correctly reporting what reached the detector. Every diagno...
08/06/2026

Both of these are the same sample.

That is a healthy GC-FID, correctly reporting what reached the detector. Every diagnostic you would run on it comes back clean. The column is fine. The inlet is fine. The method is fine.

The only difference between these two traces is the air feeding the flame.

An FID burns hydrogen in air and counts the carbon it sees. It cannot tell carbon that arrived in your sample from carbon that arrived in your air supply. Cylinder air varies bottle to bottle. House compressors pull in whatever the building breathes. An activated-carbon trap removes the heavier hydrocarbons and lets methane through within days.

The lower trace is the same injection on catalytic zero air at under 0.05 ppm THC. Same peaks, same retention times. The baseline is flat because the only carbon left is yours.

That is the entire argument for on-site zero air, and it is the kind of problem that survives troubleshooting, which is what makes it expensive.

Want a free FID gas assessment? A Sales Engineer specs the zero air and hydrogen pair for your bench and writes you a specification you keep either way. No obligation or commitment required.

Traces illustrate the effect of air-supply hydrocarbons on an FID baseline, not data from a specific instrument.

Link in comments.

One liter of liquid nitrogen becomes about 700 liters of gas — enough to push breathable oxygen out of a small lab.That'...
06/26/2026

One liter of liquid nitrogen becomes about 700 liters of gas — enough to push breathable oxygen out of a small lab.
That's why cryogenic dewars carry cold-burn and asphyxiation risk and often need an oxygen-depletion monitor on the wall. On-site membrane generation removes the cryogenic hazard entirely: it makes what your LC-MS needs from ordinary compressed air, at safe pressures, on demand.

Friday Fact #3: the safest dewar is the one you no longer need. Worth a forward to whoever owns lab safety in your building.

Request a quote → https://zurl.co/zeJ5C

Your nitrogen dewar lost money last weekend — while the lab sat empty.Liquid nitrogen evaporates around the clock. Night...
06/19/2026

Your nitrogen dewar lost money last weekend — while the lab sat empty.
Liquid nitrogen evaporates around the clock. Nights, weekends, holidays: gas you already paid for vents off whether a single sample ran or not. A membrane generator only makes nitrogen when your LC-MS actually asks for it — from the air that's already there. Nothing to deliver, nothing to lose to evaporation.

Friday Fact #2: the cheapest nitrogen is the kind you don't have to keep buying. Ever added up your annual dewar rentals + deliveries? The number surprises most people.

Request a quote → https://zurl.co/lecS5

🌍🔬 As we close out this month of celebrating laboratory science and innovation, we reflect on the critical role that lab...
10/30/2024

🌍🔬 As we close out this month of celebrating laboratory science and innovation, we reflect on the critical role that laboratories play in driving progress across industries. From developing sustainable energy solutions to advancing nuclear research and ensuring compliance with global standards, labs are at the heart of discovery. 💡⚙️

With cutting-edge products from industry leaders like LNI Swissgas, Nel, NXT Power, On Site Gas Systems, Ibis Scientific, and water purification specialists, laboratories are empowered to push boundaries, shape the future, and create a brighter tomorrow for all. 🌱🔋

Let's continue to support the innovations that fuel progress in science, technology, and sustainability. 🌍✨

Address

Houston, TX

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+12816689154

Alerts

Be the first to know and let us send you an email when Southern Laboratory & Industrial posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Southern Laboratory & Industrial:

Shortcuts

Share