TechCorr

01/16/2020

Online Tank Inspection....
No Shut downs or no draining of tanks.
https://youtu.be/wAqCnjMJjPQ
Santosh Gavankar Surya Munnaluri Gaurav Chopra Prakash Minch Anil Kumar G Marlon de Rosales Techcorr USA Techcorr Usa TechCorr Techcorr TechCorr TechCorr TechCorr Europe Techcorr USA Management Tech Corr USA

02/13/2019

TechCorr is proud to announce its wide range of In-Service & Out-Of-Service TANK INSPECTION Services!

Edward Rodrigues Santosh Gavankar Surya Munnaluri Gaurav Chopra Prakash Minch Anil Kumar G TechCorr USA LLC Techcorr Indonesia TechCorr México Techcorr USA

12/24/2018

TechCorr Wishes one and all A Happy Christmas & A Very Prosperous New Year.

TechCorr TechCorr USA LLC Techcorr Indonesia TechCorr México TechCorr Europe Techcorr USA Techcorr USA Techcorr USA Management Edward Rodrigues Santosh Gavankar Surya Munnaluri Anil Kumar G Gaurav Chopra Prakash Minch Oswaldo Diaz Russell Black Billy Yackel

11/28/2018

No need to open you tanks....
No shut down needed...
Online Tank Inspection as per API guidelines...
http://onestopndt.com/listings/businesses/techcorr-inc/



One Stop NDT Santosh Gavankar Edward Rodrigues Reshma Bhalekar Bhavesh Sawant Surya Munnaluri TechCorr Techcorr USA TechCorr USA LLC Techcorr USA TechCorr USA,LLC Techcorr Indonesia TechCorr México TechCorr Europe

11/25/2018

If you think you qualify.... Please submit your resume.
Santosh Gavankar Surya Munnaluri Anil Kumar G Edward Rodrigues

08/19/2018

TechCorr is a leading Advanced NDT Services Company. Contact us for...

- Long Range Ultrasonic Testing (LRUT) for 100% inspection of pipelines from a single location.

- Pulsed Eddy Current Testing (PECT) for detecting corrosion under insulation. Under Water Pulsed Eddy Current Testing for detecting corrosion under insulation in subsea pipelines, Jetty piles, offshore Risers, etc. with the help of a diver.

- Short Range Ultrasonic Testing (SRUT) for the inspection of tank annular plates and under pipe supports.

- Acoustic Emission Testing (AET) for Online Inspection of Tank floor.

- Automated Corrosion Mapping is an ultrasonic technique utilized to scan one-hundred percent of a steel surface in ambient and high temperature.

- Online Tank Inspection using Robotics while the tank is in service.

- Tube Inspection of ferrous and non-ferrous tubes using RFT, NFT & IRIS.

- 3D Laser Corrosion Mapping for Laser Scanning Of Corroded Pipelines, Vessels & Tanks.

- Magnetic Flux Leakage for inspection of above ground storage tanks during shut down.

- Wire Rope Testing detects and measures localized defects or deterioration and loss of material.

- Composite Repair of corroded, leaked, cracked or damaged pipelines, vessels, tank roof etc.

- Visual AIM consulting services and software for total Asset Integrity Management system.

TechCorr TechCorr USA LLC Techcorr USA Management Techcorr Indonesia TechCorr México TechCorr México Edward Rodrigues Santosh Gavankar Surya Munnaluri Anil Kumar G Gaurav Chopra Prakash Minch

08/02/2018

Acoustic Emission Testing (AET) is a Non-Destructive Testing (NDT) method that is used to analyze emitted sound waves caused by defects or discontinuities. These acoustic waves are induced by small deformations, corrosion or cracking, which occur prior to structural failure due to the stress conditions created by the contents of the equipment or by environmental conditions. It is therefore possible, with AET, to locate structural defects and to monitor the propagation and development of discontinuities. Because of the versatility of AET, it has many industrial applications (e.g. assessing structural integrity, detecting flaws, testing for leaks, corrosion, monitoring weld quality, etc...).

Over the years, TechCorr has gained extensive experience in inspecting Above Ground Storage Tanks (AST) for leaks, corrosion and inspecting storage spheres for structural integrity using Acoustic Emission Testing to ensure structural integrity.

3D image showing the acoustic activity of a tank shell bottom and side walls with red indicating corrosion A Powerful Screening Tool Acoustic emission testing (AET) is a powerful screening technique that provides real time, 100% volumetric monitoring of in-service equipment. AET uses advanced equipm...

07/09/2018

> Can inspect on temperatures ranging from -20 Degree to 720 Degree C.
> EMAT technique is a non contact technique and does not require a couplant as there is no actual contact.
> The readings can be picked from a distance of 4mm from the base metal.
> This all makes EMAT an extremely effective instrument for non-contact ultrasonic examination of plates, strips, pipes, bars, billets and etc.

TechCorr TechCorr USA LLC Techcorr Indonesia TechCorr Europe TechCorr México Santosh Gavankar Edward Rodrigues Surya Munnaluri Anil Kumar G Durgarao Palada Gaurav Chopra