HorkusFlux Electronics LLC

05/21/2026

When you have to mount a limit switch on a non-stationary piece of equipment. Get creative.
This has been a super fun project so far.
Can’t wait to show the complete project.

05/11/2026

New Governor Controls 😎👍

05/02/2026

New controller installed and operating great

05/02/2026

Nobody upgrades controllers faster

04/18/2026

https://www.linkedin.com/posts/landon-williams-4b2a64348_locomotive-rr-control-ugcPost-7451057384954736640-Ltwf?utm_source=share&utm_medium=member_ios&rcm=ACoAAFcCe8YBiKRsN2KkrFDRa0jT08DMF-kB2lg

Take control of your locomotive!!! Design stage finished. 😎 An upgraded version of a signal conversion module. This is designed for 72vdc locomotive relay logic as input signals and produces a perfect 12 or 24v signal for PLC’s. These are able to have custom programming for changing input to ou...

04/15/2026

Put alot into this one… 74v to 12/24v i/o module.
Specifically designed for locomotives to convert sloppy relay logic signals to perfect signals for PLC use.

04/01/2026

Similar Service Coming Soon!!
Will be available for electrical panels up-to 600 volts.

Credit :- Goes to All the Respected Owners 🎗️❤️

03/24/2026

Panel building gets tedious. 2 of 5 custom boxes.

03/18/2026

Every now and then you have to get the fun tools out for testing & trouble shooting.

03/16/2026

A new client was having difficulty finding someone to repair their gate controller. The system had some issues after sitting inactive for a while. (Nobody could/would service the equipment)
After some diagnostics, replacing a burned control board, and re-aligning an actuator mount from an inadequate install…. The Client is now operational.

Happy to have solved the issue when no others could. 🤗