What are the opening hours?

Monday 9am - 5pm Tuesday 9am - 5pm Wednesday 9am - 5pm Thursday 9am - 5pm Friday 9am - 5pm

AYA INC

Name: AYA INC
Address: Las Vegas, NV, US
Telephone: +17252006805

AYA INC is a reseller of hydraulic attachments. If you need a rockbreaker or a attachment give us a

11/25/2025

AYA Hydraulic Breaker — built for nasty rock and wet ground. Heavy one-piece housing and through-bolt core keep the hammer tight under side loads; long-life lower bushing centers the tool in boulder work. Nitrogen-assisted piston delivers consistent impact energy, while dual dampers cut shock back to the boom.
Typical mid-size setup
Carrier: 14–26 t excavators
Oil flow: 120–170 L/min · Working pressure: 160–185 bar
Blow rate: 400–700 bpm (auto-variable)
Tool: 135–150 mm diameter, moil/chisel/rock point options
Options: auto-greaser, dust/water suppression, underwater kit, silenced box
Send your carrier model + aux flow/pressure — we’ll size the exact AYA hammer kit for your job.

11/22/2025

AYA Auger Drive / Earth Drill — clean holes, fast cycles. High-torque planetary gearbox with heavy-duty output shaft and shock-load protection for tough soils.
Typical ranges
Carrier class: 5–25 t excavators
Oil flow: 70–180 L/min · Pressure: 170–230 bar
Output torque: 5–30 kNm (drive size dependent)
Flight diameters: 150–900 mm · Extensions: 1–3 m
Features: forward/reverse, case-drain for continuous duty, rock/clay tooth options, alignment cradle & pilot bit
Send your excavator model + aux flow/pressure — we’ll size the exact AYA auger kit.

11/20/2025

AYA Hydraulic Breaker — built for tough ground and long shifts. Monoblock body with sound-proof housing, nitrogen energy system and anti-blank fire control delivers fast, controlled blows with less stress on the boom.
Typical mid-size specs
Carrier class: 12–24 t excavators
Oil flow: 120–170 L/min · Working pressure: 150–180 bar
Impact energy: 3–5 kJ · Blow rate: 400–800 bpm
Tool Ø: 120–135 mm (moil/chisel/blunt)
Options: auto-greasing, dust collar, underwater kit, rotation bracket
Send your excavator model + aux flow/pressure — we’ll size the exact AYA kit (mount, hoses, and setup).

11/19/2025

AYA Hydraulic Rock/Concrete Saw — precision cutting for reinforced concrete, rock and asphalt. High-torque radial piston motor drives a balanced blade for straight, low-vibration cuts; integrated water ports suppress dust and cool the blade for longer life.
Technical highlights
Blade Ø 1.2–1.8 m (model-dependent) → cut depth up to 0.9 m
Required aux. hydraulics: 120–220 L/min, 180–320 bar
Direct-drive, high-torque motor with variable speed
Heavy-duty gearbox + double row bearings for side-load stability
Water/dust suppression, optional guarding & depth gauge
Ideal for: trenching, wall openings, quarry faces, asphalt cuts
Send your excavator model + aux flow/pressure—we’ll spec the correct saw kit (mount, hoses, and flow control).

11/17/2025

AYA AT-Series Hydraulic Breaker — box-silenced, monoblock toughness for harsh jobsites. The nitrogen-charged accumulator and energy-recovery system deliver consistent blows while anti-blank-fire protects the tool and bushings. Built for long service with a heavy-duty lower sleeve and oversized piston.
Technical highlights
Carrier class: ≈14–26 t excavators (model-dependent)
Hydraulic window: 120–180 L/min @ 160–185 bar
Impact energy class: ~3.5–5.0 kJ, blow rate 350–700 bpm
135 mm tool (moil/chisel/flat options)
Sound-attenuated box housing + vibration isolation
Options: auto-grease, dust-suppression ports, underwater kit
Need the exact match? DM your excavator model, aux flow & pressure—we’ll spec the right breaker.

11/12/2025

AYA Rotary Drum Cutter — precision cutting with controlled vibration.
Transverse twin-drum head with a high-torque planetary drive and tungsten-carbide picks delivers clean profiles in rock, concrete and shotcrete. The water-spray kit shown
keeps dust down and cools the picks for longer service life. Perfect for trenching, scaling, tunnel refurb and wall profiling.
Technical highlights
Carrier range: ~8–35 t excavators (model-dependent)
Hydraulic window: ≈60–220 L/min oil flow, up to 200–350 bar working pressure
Low noise/low vibration vs. breakers; selectable pick pattern for material hardness
Anti-stall valve and robust gearbox for steady torque at low RPM
Replaceable wear sleeves & quick-change picks reduce downtime
Options: dust suppression/water kit, auto-grease, floating skid, 360° rotation adapters
Need the right size? Share your excavator model, aux flow/pressure and application— our team will spec the ideal cutter.

11/10/2025

AYA Hydraulic Breaker — crafted for impact, powered for change.
Box-type, noise-damped housing with a monoblock cylinder delivers high reliability and low vibration. Gas-assistedpower cell + energy-recovery valve maintain blow energy under tough back-pressures. Built for quarrying, trenching and demolition.
Technical highlights
Carrier compatibility: multiple sizes from compact to 30-ton class (share your carrier model for the best match)
Wide hydraulic window: typ. 70–180 L/min oil flow, up to 180–200 bar working pressure (model-dependent)
Anti-blank firing protection to reduce tool and bushing wear
Long-life wear bushings; dust seal & optional water kit for silica control
Auto-grease ready (1/8” port) for continuous tool lubrication
Through-bolt-free design for faster service and higher uptime
Side/Top mount options; fits quick couplers
Need sizing? Tell us your excavator model, auxiliary flow/pressure and pin size—we’ll spec the perfect AYA hammer.

11/07/2025

AYA Rotary Drum Cutter — precision milling for rock & reinforced concrete when low vibration and tight tolerances matter. Perfect for trenching, wall profiling, tunnel rehab and bridge decks.

Technical highlights

Carrier range: 8–16 t excavators
Required flow: ≈ 70–120 L/min @ up to 320 bar (back-pressure ≤ 10bar)
High-torque planetary drive for constant cutting force
Carbide picks with quick-change holders; replaceable wear plates
Low noise & vibration vs. breakers; minimal overbreak
Works horizontally or vertically; optional water/dust ports for silica control
Compatible with tilt-rotators; plug-and-play two-hose connection
Cut cleaner, faster, and safer where precision beats percussive impact.

10/31/2025

AYA AT-500M Hydraulic Breaker — built for consistent power and low maintenance in quarrying and heavy demolition.
Key specs
Carrier class: ~18–26 t excavators
Operating weight: ~1,500–1,800 kg (with tool)
Tool diameter: ~125–135 mm
Oil flow: ~120–160 L/min @ 160–180 bar (back-pressure ≤ ~7 bar)
Impact rate: ~400–700 bpm
Single-body monoblock design for rigidity and fewer leak paths Nitrogen gas assist for constant blow energy and cooler operation Heavy-duty lower bushing + dust seal; optional auto-lube and sound-suppressed housing
Delivers controlled, high-energy blows for oversized rock breaking, trenching, and foundation work—day in, day out.

10/29/2025

Cut cleaner, faster trenches. AYA excavator chain cutter delivers a narrow, uniform trench with low vibration/low noise, ideal for utilities and fiber. Dual-motor planetary drive puts torque to the picks; sealed bearings and wear plates extend life.

• Typical trench: 300–800 mm width, to 2.0 m depth (depending on
boom/chain set)
• Hydraulic demand: 120–220 L/min @ 320–350 bar
• Cutter speed: 60–120 rpm, output torque 12–30 kNm
• 22/25 mm carbide picks, quick chain change for different widths
• Options: water spray dust suppression, auto-lube, tilt-rotator ready
Builds precise trenches in hard soil to medium rock with minimal over-break
and easy backfill.

10/22/2025

Power that travels with your crew. AYA hydraulic breaker delivers high impact energy with a nitrogen-assisted piston, anti-blank firing, and a silenced box housing. Wide flow window for easy pairing, auto-grease ready, and tool options (moil/chisel/compaction) for rock, concrete, or trenching—
built to hit hard and run cool with low maintenance.

10/20/2025

Precision trenching from plan to ground. Our chain trencher’s high-torque drive, carbide picks, and adjustable depth control keep cuts straight, clean, and spec-true—perfect for power, fiber, and drainage lines.

Address

Las Vegas, NV

Opening Hours

Monday	9am - 5pm
Tuesday	9am - 5pm
Wednesday	9am - 5pm
Thursday	9am - 5pm
Friday	9am - 5pm

Telephone

+17252006805

Website

http://www.ayainc.net/

Alerts

Be the first to know and let us send you an email when AYA INC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to AYA INC:

Shortcuts

Address
Telephone
Opening Hours
Alerts
Contact The Business
Claim ownership or report listing

Want your business to be the top-listed Engineering Company in Las Vegas?