Hoffman Welding and Services

Hoffman Welding and Services Local, insured welding serving Leola, SD. Ag fabrication including gates, creep panels, free‑standing panels, and aluminum.

Mobile welding for equipment, cattle fence, and on‑site repairs. Custom gates with slam latches or retrofits.

Been busy and forget to post to social media 😅Here's a repair I did this morning. Tractor side bucket mount was hanging ...
08/02/2026

Been busy and forget to post to social media 😅

Here's a repair I did this morning. Tractor side bucket mount was hanging on by a thread, and the bucket had quite a few cracks. Got it all ground out and welded back up!

I can do full on-site mobile welding, with welder/generator, torch, etc. on board, ready to tackle any challenge!

- Willem Hoffman, Hoffman Welding & Services

I can do aluminum!The hinges on this ATV ramp had seen better days. Got them rewelded and beefed up. Reach out if you ne...
06/13/2026

I can do aluminum!

The hinges on this ATV ramp had seen better days. Got them rewelded and beefed up.

Reach out if you need anything!

Willem Hoffman
605-252-2034

Had an order for a custom panel with walk thru gate come in Saturday night. Done by Monday and delivered on Tuesday! Tir...
06/09/2026

Had an order for a custom panel with walk thru gate come in Saturday night. Done by Monday and delivered on Tuesday!

Tired of gates or panels that don't quite fit? I can build to your exact dimensions and accommodate almost any style of hinge and latch.

Give Willem a call at 605-252-2034.

Got a call about a grapple that snapped after some previous welds gave out. We cleaned it up, chased out the cracks, and...
05/16/2026

Got a call about a grapple that snapped after some previous welds gave out. We cleaned it up, chased out the cracks, and burned in some fresh dual‑shield to get it back in working shape.

This is a temporary fix—the plate is stressed and already showing fractures. A proper long‑term repair means fabricating a new bracket and rebuilding it the right way.

For now, it’s back in service and holding strong until the full rebuild happens!

Give me a call at 605-252-2034 for your welding repair needs in the Leola and surrounding area!

Wrapped up a small but important job Sunday — a brisket bar that didn’t match the customer’s cattle chute. I reworked th...
05/12/2026

Wrapped up a small but important job Sunday — a brisket bar that didn’t match the customer’s cattle chute. I reworked the bar, fabricated new mounting points, and fit everything so it operates the way it should. Clean, strong, and ready for work 💪

Hoffman Welding & Services
605-252-2034

05/05/2026

Slam latch retrofit on existing gate and post. Contact for more info!

I am now accepting orders for portable panels, gates & custom requests!Portable 10' panels are built from 1x1 square tub...
04/10/2026

I am now accepting orders for portable panels, gates & custom requests!

Portable 10' panels are built from 1x1 square tube. $195 per 14 GA panel @ 85lbs or $145 per 16 GA panel @ 66lbs. These are lightweight but stout panels, easily moved by hand.

Supporting two options for gates. A heavy-duty option built from 1.5" 11 GA frame and 1.25" 14 GA rungs and a medium-duty option built from 1.5" 14 GA frame and 1.25" 14 GA rungs. These are competitively priced against typical competitors while being much stronger. Welded hinges support 3/4" J bolts (also included with price) & come with 40" chain & keeper. Up to 14' will be bent tube frame, but can support non-bent up to 20'. Gate size measures 5" short to account for hinge spacing (ie. 10' gate measures 9' 7" actual). Pricing and weights are listed in pictures.

Prices are for bare metal. I can paint for an additional $50 / product.

I currently have a 10' 11GA gate and a 12' 14 GA gate available on hand.

I can support whatever hinge spacing needed on panels or gates if you want something compatible with what you already own.

I can also support custom sizes or requirements. Included in pictures is a custom creep gate I built. The one shown priced out to $335.

I am also offering delivery and gate hanging services. I can support your standard j-bolt through wood posts or welded on hinges.

I also plan to keep 3/4" J bolts, chain keepers & quick latches on hand if you need just those.

I am experimenting with some clamp on hinges for my 1.5" gates as well as some quick spring latch options, I will update when these options are available.

Please reach out to Willem Hoffman @ 605-252-2034 anytime for orders or quotes!

How much stuff can I fit in the back of this longbed 😂 Moving some portable panels I built for temporary calving pens. A...
04/05/2026

How much stuff can I fit in the back of this longbed 😂

Moving some portable panels I built for temporary calving pens. A guy can never have too many panels on hand! These are 10' x 5' built from 1x1 14 gauge, easy to move by hand.

I've got some gate projects going on as well. I'll post at a later time some standard sizes and pricing that i plan to produce. In the meantime, feel free to reach out to get a quote or submit an order!

Hoffman Welding and Services
Willem Hoffman
605-252-2034

Built this torque wrench stand for a good friend of mine. Works great to support extensions on torque wrenches/breaker b...
03/24/2026

Built this torque wrench stand for a good friend of mine. Works great to support extensions on torque wrenches/breaker bars for deep well rims (duallys, tractors, trailers, etc.). Supports up to 1" drive (opening measures 1.25" on each slot). The one pictured is 48" height to support tractors. I can build to any height requirement. Price on a 48" stand is $265.

Please reach out to Willem Hoffman at 605-252-2034 or on messenger if you would like one!

Address

Leola, SD
57456

Website

Alerts

Be the first to know and let us send you an email when Hoffman Welding and Services posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Hoffman Welding and Services:

Shortcuts

Share

Category