A R Welding LLC

10/01/2026

Here at A R Welding we are venturing into the candle industry. We would like to know your opinions on what flavor you would light up in your shop?

09/25/2026

One of our most valued customers returned needing a grapple for his tractor repaired. As you can see it’s been “fixed” before. We ended up cutting all the boogers off and the racing it and straightening the arm out to give him another 10 years of work, hopefully longer!

09/21/2026

With hunting season around the corner, a customer of ours needed 3 hog pen drop gates built in order to trap hogs on his land. He brought us a drawing constructed by AI. The drawing needed some changes in order to be realistic but we got it reworked and built.

Give us a shout for any and all your welding needs! Aluminum,stainless,carbon, etc!

09/17/2026

A customer of ours decided to convert the semi truck fuel tank into an external fuel tank to keep on the back of his truck while working out of town. He needing two small leaning posts welded to the front in order to keep it topside for strapping purposes, along with a 2” NPT female thread-o-let for his pump to thread into.

Give us a shout for any and all your welding/fabrication needs. This includes aluminum, stainless, carbon etc.!

09/15/2026

A customer of ours had a platform for his boat built by another local welder. As you can see it was not very easy on the eye. He contacted us asking if we could remake it. He sent us the same design he had sent the other welder and this was the finished product!

Give us a shout for any and all your welding and fabrication needs!

07/15/2026

We had a customer contact us wanting to build a 2.5” stainless exhaust for his ‘69 Camaro with a roadster chassis. We have done multiple exhaust systems over the years but nothing to this extent. The Camaro now has true dual equal length 2.5” stainless, along with an x pipe and electric cutouts followed by 2 vibrant ultra quiet resonators. We built the exhaust to be fully removable and only takes 10-15 minutes for complete install. (In the picture there is a missing flex pipe, we were waiting on the second one the come in)

07/03/2026

A customer of ours needed his ‘69 Camaro gas tank chopped in order to clear his new chassis. While wanting to keep the factory mount point we came up with this design in order to minimize the low of gallons in the tank,( only 2.5 gallons of space were deleted). After a lot of purging of the tank we chopped off what was needed to ensure clearance of the tank and cut out new end caps as shown in the pictures.

06/12/2026

05/19/2026

Returning customer came in wanting to put railing on the top of his toolbox. After getting some measurements we came up with this so it can look as if it came from the factory with rails!

We’re running a deal for toolbox railing at $200 for midsize truck toolboxes and $250 for full size toolboxes. Give us a shout to get yours done!

05/14/2026

Currently we are running a package deal with our teardrop exhaust tips! $350 gets you not only a muffler delete but a dual teardrop tip with installation. Give us a call or message to book today!