AKERS Engineering

03/27/2026

Head over to the AKERS Engineering YouTube channel to get caught up on why orders were on hold for a week. Absolute blast doing some product testing and shenanigans in Moab, UT.
https://youtu.be/4aoKGWlDPjg?si=iUebuwMz9Xx3cfVw

03/27/2026

Moab, UT is an amazing place and we can't wait to back there. 6 days was only enough to get sample of the epic trails, hikes and scenery. Check out this video for some of the rock crawling and shenanigans that went down!

Rock crawling on some of the most iconic trails near Moab, Utah recorded in 4K with the help of a new generation of drone.🦎Innovative products: akersenginee...

08/20/2025

The newest GECKO24 build - The “TOXIC AVENGER”
Never would have guessed how insane these SWB can get. It’s tiny, but deadly out there killing lines on the rocks.
Had to switch up from the norm ( Mini Komodo) to throw in a brushed PN90 to meet rules for the newest micro games. Still a ton of fun, and always cool to see how many different build configurations this tiny chassis can accommodate.
120mm WB / 338g / 65% F bias / OD front / 55mm tires / quick release battery tray / Flex Booster Disconnect

🪨
🪨
🪨

08/13/2025

Awesome night out with the GECKO24 V2 last night at Flat Rock RC near Shelbyville, TN. I hate taking cash money from good friends, but you’re going to have to build those GECKOs up to keep your money!
😜🍻🦎🪨
Some moving footage to come when I get a free minute.
🪨
🪨
🪨

08/11/2025

Without further ado…you may now proceed to akersengineering.com to obtain the high performance parts you’ve been waiting so very, very patiently for!! 🙌
✅ U.ROCK restocked X3 variants + NEW
✅ GECKO24 V2 in forged carbon and titanium
✅ GECKO24 V1, regular version for those scaler builds with bumpers

Lots of new accessories available for these chassis as well. “U.ROCK Accessories” consolidated to one product page.

Lots more to come too. Restocking 1.3/1.8 comp beadlock wheels in a few hours later today.

🪨
🪨
🪨

03/03/2025

Is AKERS Engineering sending off his favorite micro crawlers to some YouTuber whom I’ve never met before with only a promise and man’s word that they’ll be looked after….

….YEP!

p.s. - USPS, PLEASE don’t mess this up. 🙏🏻

🪨
🪨
🪨

12/13/2024

NEW tie rod and drag link combo is now available for your Meus +5mm Isokinetic axles. Have your 🎂 and eat it too while you enjoy more steering angle, more traction through turns, more clearance over stock AND no slop.

akersengineering.com

This tie rod is slightly longer than stock for more toe out which=
✅ More steering angle without needing to get the Dremel out since steering stops are on the front of the axle.
✅ Meticulously designed to maximize steering angle while demising as close to the axle housing as possible.
✅ No plastic rod ends to get loose and break or make for poor response.
✅ Improved Ackerman angle for more traction while turning.
🪨
🪨
🪨

12/13/2024

Lettsssss GOOOO!!!

🛒 akersengineering.com

The new GECKO24 Komp King V2 is LIVE on the website. Have a look and let us know what you think! It took some time and creativity to improve on a chassis that already performs so well.

We were able to trim a lot of fat (relatively speaking) from the belly of the GECKO24. The most notable feature is the incorporation of an exclusive skid that makes the transition from the links much smoother with far less to hang up on. It’s the best of both worlds: flat belly skid with an ultra low CoG and it also captures the upper links mounts with double shear mount. It’s very similar to the stock pattern, but not quite the same. This skid is 100% reversible too which open up a lot of creative things to do with your AE Motor Mounts.

2 skids to choose from, 3 different sliders, and an optional shock tower setup will allow you to breath new levels of performance into any of your SCX24-based rigs.

Thank you all for the support and patience! Enjoy!

🪨
🪨
🪨

12/12/2024

SO many new products and so much getting restocked. Apologies for the delay in getting these out but I don’t want to restock the products 1 by 1 and have people paying for shipping multiple times or missing out on the new drops!

Will be working late to try and have all the products on the website tonight, drafted - and we’ll go live tomorrow evening.

Thank you for your patience, I hope you’ll think it was worth the wait! STAY TUNED!

🎁 🎄 🎅 Goal is to get as organized as possible so that we can get these parts out the door and under your trees ASAP!
🪨
🪨
🪨

11/22/2024

More high-quality, USA-Made, gravity-defying, unique RC chassis and components are on the horizon! 🌅 🚢

Leaving one office, commuting back to another. THANK YOU ALL for the support and patience. A record for the most orders in a 3-week period was broken recently. Y’all are awesome and I look forward to supplying you with the parts you’ve all been waiting for!
🪨
🪨
🪨

10/28/2024

Middle TN - Rejoice! Starting today is carrying some select AE parts to help you up your SCX24 game (and without the need to pay for shipping 😎). Make sure to bring your transmitter so that you can bolt your new parts on in the staging area and immediately hit the trails. If you forget batteries, that’s okay- DHL has you covered there too.
Go show some support for your LHS and show why you appreciate having instant access to more parts on shelves and pegs.
DHL also carries a ton of other awesome products from the best brands in the business!

🛒 3320 US Highway 41 A North, Unionville, TN 37180

•
•
•

10/22/2024

There’s been a ton of interest in this 1/10 IGUANA LCG chassis configured as a “Cheater / ProMod” so I’ve started to print some accessories to make that easily available. It’s such a simple, lightweight setup that is a blast to carry around and crawl lines wherever you find them

Working on revamping certain products on the website that can have all of these extra add-ons to make the ordering experience more streamlined and user friendly. Currently it feels like you have to hunt around and know what’s compatible. Stay tuned!
🪨
🪨
🪨
🦎