Kremin, Inc.

09/02/2026

In aerospace and defense manufacturing, quality isn't a department. It's a system.

Kremin's quality process runs from first article through production — CMM inspection, in-process gauging, full traceability on every job. When a customer needs documentation for a flight-critical component, we have it.

This video walks through why quality control is non-negotiable in CNC manufacturing and how we approach it. If you're qualifying a supplier for a critical program, this is relevant to your checklist.

CTA: Watch here: https://hubs.la/Q04t97xN0

At Kremin Inc., our quality system meets or exceeds industry standa...

08/31/2026

Caption:
Not every shop has 5-axis capability. And the ones that do don't always use it the right way.

At Kremin, 5-axis milling means we can machine complex geometries in a single setup — reducing fixturing, eliminating repositioning error, and holding tighter tolerances on the features that matter most. For aerospace and defense components, that matters.

Our team put together a clear explanation of what 5-axis milling is, when it's the right call, and what it means for part quality. If you're evaluating machine shops for complex work, this will help you ask better questions.

CTA: Watch here: https://hubs.la/Q04t999F0

5-axis milling is a technique uses at Kremin Inc. machine shop, but...

08/26/2026

Some tolerances can't be chased with turning or milling alone.

Kremin's precision grinding services handle the jobs where surface finish, cylindricity, and diameter tolerance have to be held to tenths — not thousandths. It's a finishing step that separates a part that passes inspection from one that doesn't.

If you're sourcing components with tight finish requirements, this is worth a look. We walk through our grinding capability and the types of parts it's built for.

Watch here: https://hubs.la/Q04t9mk40

At Kremin, we attempt to machine all of our customers' parts comple...

08/24/2026

Every precision manufacturer will tell you they hold tight tolerances. Not every shop can show you why.

Kremin Inc. has been delivering precision machined components for aerospace, defense, energy, and industrial customers for decades. Our team, our equipment, and our quality systems are built around one principle: the part has to be right.

We put together a short video that introduces who we are, what we do, and why our customers keep coming back. Worth three minutes if you work with machined components.

https://hubs.la/Q04t9lyt0

Kremin Inc. is an American machine shop in Frankenmuth, MI speciali...

08/19/2026

One small process change on your shop floor can compound into real time savings across a full shift. Simple, fast, and free to implement. Watch this one.

https://hubs.la/Q04p4Pfd0

07/29/2026

Oil mist control isn't glamorous, but it's a real operational cost if you're not managing it right.

At Kremin, we've run two different mist collection systems side by side to see which actually performs. The Mist-Fit 550 is a traditional filtering setup — and it works, but we had to make custom modifications to keep it from burning through disposable filters at a rate that killed the economics.

Honest review. No sugarcoating. If you're evaluating mist collectors for your shop, watch this before you buy.

Watch here:

Oil mist collectors play an important role in a busy machine shop, ...

07/27/2026

Running a part longer than the Z1 stroke of your Swiss lathe? You need a rechuck operation — and you need it coded correctly.

Chase goes deep on the programming process, walking through the setup logic and then running a part live so you can see the code and the machine side by side. One of the more practical Swiss lathe tutorials we've put out.

Watch here:

When you need to run a part that is longer than the Z1 stroke of yo...

07/22/2026

5-axis milling is a real capability here at Kremin — but it's not always the right call for your production run.

This video breaks down what 5-axis actually enables, where it makes sense, and where a simpler approach gets you to the same result faster. If you're an engineer or buyer evaluating machining processes for a complex part, this is worth 5 minutes of your time.

Watch here:

5-axis milling is a technique uses at Kremin Inc. machine shop, but...

07/15/2026

Tighter tolerances. Smaller components. Less setup complexity on intricate geometries.

Swiss turning isn't the right process for every job — but when it is, nothing else competes. Kremin has built our production capabilities around it, and this video explains exactly why and when it makes sense for your parts.

If you're sourcing precision components for aerospace, defense, medical, or energy applications, watch this before your next RFQ.

Watch here:

Swiss turning is a form of CNC manufacturing that allows for even t...