Ammolytics

Home
Ammolytics

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Ammolytics, Science, Technology & Engineering, .

Ammolytics is a collaborative data-analysis platform, with the goal of improving the signal-to-noise ratio of information and ideas within the reloading and competitive marksmanship community.

25/11/2025

CAP Lite shipping now! Store link in bio.

To celebrate the launch of our first retail product, we're giving you 25% off.

Keep your muzzle velocity more consistent and avoid the mess from losing humidity packs that get lost in your powder jug. Time to get serious about your match reloads and get a CAP Lite.

Each CAP Lite includes:
- one seal designed for specific powder jugs
- one hanger to hold the humidity pack
- one 32% two-way humidity pack from Boveda
- one badass Ammolytics sticker

Designed to be affordable, durable, and most importantly, to work. Made here in the USA.

10 packs refills of the humidity packs are also available, limit one per order.

Sale ends December 1st and discount pricing applies only to the CAP Lite.

07/07/2025

Production samples of the CAP Lite arrived!

left: H8-Lite for 8lb jugs like those used by Hodgdon and Shooters World powders.

right: V-Lite for Vithivouri powder jugs

19/05/2025

Primer test results. Wow 🤯

While this is just preliminary evidence, I certainly wasn't expecting the results to be so dramatic.

Disclaimers:
1. Sample size of 10 rounds each is too small for my preference.
2. Rounds with CCI #41 were fired first to make sure I was on target at 600yd.
3. Lot numbers were recorded, but not age of primers.

Load recipe:
- Once fired Lake City brass (2020), swaged
- 80gr Sierra MatchKing
- 24.0gr Vithivouri N140 (humidity locked at 49%)

20/01/2025

Goodie bag is full of samples, ready to hand out at SHOT Show!

Behind the scenes: I designed a stamp and 3D printed it with flexible material, then used it to mark the boxes.

27/03/2024

Powder humidity experiment, Wrap-up

Photo 1: Powder sample weights over time. Every day for a week then a month later.

- Two spill incidents, oops.
- Powder that touches humidity packs does appear to absorb more moisture and exhibit slowly less stable weight over time.
- Humidity packs work, airflow & seals are important!

Photo 2: Temp and relative humidity readings over time (Kestrel Drops).

- Gaps in data are from batteries dying.
- Humidity packs maintain exceptional consistent relative humidity!

I can share the spreadsheet publicly if folks want to see it!

What's next? I'll post a video shortly with an explained and preview. 🤓

See you in the future! 💡⚡

12/02/2024

Powder humidity experiment, Day 5

Football bores me 😒
Here's some data 🤓

The last three measurements have been relatively stable compared to the first two days, especially for the two samples inside the experiment.

The difference between the indoor and outdoor control samples is now about 0.040 grams (0.62 grains), as far as I can tell due solely to water absorption & loss.

Unless there's a drastic change, I'll measure two more days.

See you in the future 💡⚡

01/02/2024

Love to see the industry moving forward through innovation & competition!

15/08/2021

Range test photo dump! 👇

1) Detecting bullet-exit at the muzzle with an oscilloscope and the bayo sensor.

2) Probes connected to modified audio cable. Sensor wiring diagram reference helps to avoid mistakes.

3) 100MHz sample of the voltage generated when a bullet passes a sensor. Successful test!

4) What luck! The test platform fits perfectly on top of the crate! This is where I store/organize all electronic gadgets.

5) Does that sensor look straight to you? I can never tell 🤷‍♂️

6) 10 shot group at 50yd with the rifle test platform. Pretty good but not great. More work to do. 3D printed parts should help.

Shout out to for the arca rail parts, and to for the barrel used in this experiment!

Address

Website

https://blog.ammolytics.com/

Alerts

Be the first to know and let us send you an email when Ammolytics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Want your business to be the top-listed Engineering Company?

Country:

City: