OEM Dynamics

OEM Dynamics Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from OEM Dynamics, Engineering service, 7 Convair Avenue, Ballina.

OEM Dynamics Pty Limited is an Australian owned and operated Company which has been active in the manufacture and supply of Mechanical Power Transmission and Heat Transfer products since 1975.

31/08/2026

When a standard cooler won’t fit, the solution may need to be engineered—not simply sourced.

The cooler featured in this video arrived in Australia as part of an imported machine. Its cooling element was not suited to the operating environment and was becoming clogged with debris.

OEM Dynamics assessed the failure, reverse engineered the existing unit and redesigned the cooling arrangement to allow debris to pass more freely.

For this particular project, the redesigned replacement was supplied in less than six weeks.

From reverse engineering and cooler selection through to design, fabrication and assembly, OEM Dynamics supports custom air cooler and replacement heat exchanger projects from our Ballina, NSW facility.

See the complete project story and explore our custom cooling capability:

https://oemdynamics.com.au/custom-air-coolers-engineered-for-your-application?utm_source=linkedin&utm_medium=social&utm_campaign=custom_air_coolers_sep_2026

18/08/2026

Need to identify a splined coupling, hub or shaft?

Start with four important details:

1. Component type
2. Number of spline teeth
3. Approximate spline diameter
4. Overall length

Then compare the complete spline specification before ordering. Components that look similar—or even begin to fit together—are not necessarily interchangeable.

Our new practical guide shows the complete process, including how to find the matching product through the OEM Dynamics website.

Watch the video and read the guide:

https://oemdynamics.com.au/how-to-identify-and-order-a-splined-component

Find it. Check it. Order it online.

03/08/2026

Does your hydraulic pump-drive application need more than an off-the-shelf gearbox?

OEM Dynamics can help select, configure and modify hydraulic pump-drive solutions to suit your engine, pumps, operating requirements and installation constraints.

From standard Technodrive and Durst pump drives to application-specific modifications, lubrication systems, cooling solutions and complete engineered assemblies, our team provides practical support throughout the life of the equipment.

In this video, Dave explains how our experience and in-house manufacturing capabilities allow us to:

⚙️ Engineer pump-drive solutions for demanding applications
⚙️ Modify standard products to meet specific requirements
⚙️ Repair and refurbish existing pump drives
⚙️ Provide ongoing parts and technical support

Whether you are developing new equipment, replacing an existing drive or solving a reliability problem, talk to OEM Dynamics about your application.

Watch the video and explore our hydraulic pump-drive capabilities:

https://oemdynamics.com.au/hydraulic-pump-drive-solutions

Well done Toby — proud apprentice moment at OEM DynamicsWe are proud to recognise Toby, our 2nd-year Certificate III Eng...
15/07/2026

Well done Toby — proud apprentice moment at OEM Dynamics

We are proud to recognise Toby, our 2nd-year Certificate III Engineering apprentice, who recently competed in the WorldSkills Australia 2026 Regional Turning Competition held at the Wollongbar TAFE campus.

Toby was one of seven competitors who stepped up to test their turning, measurement, planning and machining skills in a competitive trade environment.

Entering a competition like this is a strong achievement. It takes confidence to put your skills to the test, work under pressure and represent your trade.

At OEM Dynamics, we are proud to support apprentices as they develop the practical skills, discipline and problem-solving ability needed in Australian manufacturing.

Well done Toby. A great effort and a valuable experience.

02/07/2026

Does your gearbox lubrication system need better cooling, filtration or monitoring?

OEM Dynamics designs and manufactures custom l**e oil systems that combine cooling, oil circulation, filtration, instrumentation and controls into one integrated package.

Rather than coordinating separate suppliers for the cooler, pump, filters, valves, frame, pipework and monitoring equipment, customers can work with one Australian engineering and manufacturing partner.

Systems can be designed to include:

- Air-cooled or water-cooled heat exchangers
- Simplex or duplex oil filtration
- Pumps, motors, tanks and reservoirs
- Pressure and temperature protection
- Filter-condition and system monitoring
- Pipework, frames and electrical controls

Watch our new video and learn how OEM Dynamics can engineer a lubrication and cooling package around your gearbox and operating conditions.

Learn more:

https://oemdynamics.com.au/custom-l**e-oil-systems-and-cooling-modules

15/06/2026

Running Hot?

Excessive oil temperatures can reduce hydraulic efficiency, accelerate wear and shorten component life.

This short video shows one of our DYNACOOL coaxial pump coolers being manufactured and prepared for dispatch at OEM Dynamics.

Whether you're designing a new system or solving an overheating issue, our team can help identify the right cooling solution for your application.

Contact OEM Dynamics to discuss your cooling requirements on 0266818800

03/06/2026

Engineered for Reliable Hydraulic Power

FLEXILOCK Hydraulic Pump Drive Kits provide a complete solution for directly coupling diesel engines to hydraulic pumps.

With over 300 SAE and DIN configurations available, FLEXILOCK systems are designed to simplify installation while delivering reliable long-term performance across industrial, agricultural and mobile hydraulic applications.

✔ SAE & DIN configurations
✔ Engineered drive systems
✔ Reliable engine-to-pump coupling
✔ Global application support

Learn more:

https://oemdynamics.com.au/flexilock-hydraulic-pump-drive-kits

17/05/2026

Complex parts. Fewer setups. Greater machining efficiency.

OEM Dynamics’ lights-out manufacturing capability helps reduce handling, improve consistency and maximise spindle utilisation across batch production runs.

Using advanced multitasking CNC machining, we combine turning, milling and drilling in a single setup to improve repeatability and production efficiency for precision components.

✔ Shafts
✔ Housings
✔ Couplings
✔ Manifolds
✔ Bell housings
✔ Custom precision parts

See our lights-out manufacturing capability in action:
https://oemdynamics.com.au/lights-out-manufacturing

04/05/2026

Looking to reduce machining costs?

Lights-out manufacturing allows automated CNC machining with less manual handling and fewer setups.

That means:
✔ Lower cost per part
✔ Better consistency
✔ More efficient production

Learn more:
https://oemdynamics.com.au/lights-out-manufacturing

15/04/2026

Here is an example of an engineered design upgrade.

This splined slip hub came to us as a welded 2-piece component. We reverse engineered and redesigned it into a single-piece CNC machined part using 4140 steel, finished with nitriding for durability.

And manufatured the matng shaft.

* Stronger
* More reliable
* Built to last

See how we do it
https://oemdynamics.com.au/aftermarket

Address

7 Convair Avenue
Ballina, NSW
2478

Telephone

+61266818800

Website

Alerts

Be the first to know and let us send you an email when OEM Dynamics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category