25th Hour Fabrication

25th Hour Fabrication 25th Hour Fabrication, specialising in stainless steel to aluminium, automotive to marine and everything inbetween

Is your aluminium tanks pitted beyond repair?Think you can squeeze in a few more litres? Just want something to last ano...
03/09/2026

Is your aluminium tanks pitted beyond repair?
Think you can squeeze in a few more litres? Just want something to last another 50+years?

Well a new tank is nothing out of our realm and will be a perfect addition to any build, built to outperform the standard and built to last✅️

Alluminium or stainless
-fuel tanks⛽️
-water tanks🌊
-air tanks💨
-tank tanks(never built one but would love to)💥

Any tank. Any material. We've got it covered here at 25th Hour Fabrication⏱️

Sleek set of colour code scrub bars and sliders for Ned's ranger! Fits in perfectly with the aesthetic of the vehicle an...
03/09/2026

Sleek set of colour code scrub bars and sliders for Ned's ranger! Fits in perfectly with the aesthetic of the vehicle and offers the best protection one could ask for💪🏼

For any of your barwork or protection needs, give us a bell at 25th hour fabrication!

17/08/2026

Low profile alluminium roof rack/sliders now available! These are light enough to carry the essentials but keeping that centre of gravity where it needs to be💯

Jacks d22 is breathing well with a new airbox and 4"snorkel💨This is a great upgrade when searching for clean air and esp...
16/08/2026

Jacks d22 is breathing well with a new airbox and 4"snorkel💨

This is a great upgrade when searching for clean air and especially if youre a looking for a tune in the future💥
A custom intake system removes all restrictions from a stock setup, and in most cases they bottleneck down to 2 inches! A turbo needs much more than that💯

Daniel had his gq in for a couple weeks for me to complete front and rear scrub bars, kicked sliders, and a rear bar com...
16/08/2026

Daniel had his gq in for a couple weeks for me to complete front and rear scrub bars, kicked sliders, and a rear bar complete with tire and twin jerry swingaways!

Barwork and protection is one of the most practical modification, providing protection and insurance for wherever your 4wd can take you🌳

Bookings are still filling quick. Send us a message and get your vehicle protected at 25th hour fabrication!

Liam's 105 is now fitted with some scrub bars and kicked sliders💥 ready to now hit some tracks and hopefully not trees.....
16/08/2026

Liam's 105 is now fitted with some scrub bars and kicked sliders💥 ready to now hit some tracks and hopefully not trees... but if the inevitable happens, the protection is there!!

💥IT'S BACK!!💥 AND NOW FITTED WITH SOME ARMOUR!After getting some clean cool air into it with the snorkels, matt bought h...
05/08/2026

💥IT'S BACK!!💥 AND NOW FITTED WITH SOME ARMOUR!

After getting some clean cool air into it with the snorkels, matt bought his cfmoto back in for the protection it needs🛡
Fitted with a lightweight bullbar, scrub rails and side rails out of 40 od, 3mm wall aluminium totalling in at only 16kg!

Finished in a raptor coating to try eliminate paint wear while smashing through the scrub💪🏼

With these buggys getting more and more popular its important to keep them lasting as long as possible, so get your wish list together and get your booking sorted at 25th hour fabrication!!

What a gorgeous piece of art this ute is😍A few items completed on Shaun's fj45-A full stainless 2.5"-3" twin exhaust inc...
26/07/2026

What a gorgeous piece of art this ute is😍
A few items completed on Shaun's fj45-

A full stainless 2.5"-3" twin exhaust including resonators and mufflers giving the v8 a beautiful rumble and tone🎶

A seamless satin black Powdercoated 4" snorkel, low cut to keep it all in proportion✅️

Having the round top filter, we've made up a plenum so suit an airbox housing a pod filter to ensure everything is airtight to the snorkel💨

A few other items ticked off the list for roadworthy include;
-Shortened front shaft
-battery tray mount repair and stiffening
-radiator support mount
-small rust repair of footwell

It was a pleasure to work on such a beautiful ute, and it hope to see it back in soon for a bit more work!

For any of your fabrication needs, message us at 25th Hour Fabrication💯

The snorkels from last post are now fitted!! And Josh guessed right, they belong to a cfmoto u10💥 Matt came back after h...
19/07/2026

The snorkels from last post are now fitted!! And Josh guessed right, they belong to a cfmoto u10💥

Matt came back after he purchased this new cfmoto and was looking for some longevity and reliability when cruising through the scrub and dust, and these raised intakes for the cvt and engine air is just what he needed!

Next up for this little rig will be a bull bar and scrub bars in the near future💯

Can you guess what these intake snorkels are for? I bet you wont😉Theres a FREE STICKER for anyone that guesses the right...
16/07/2026

Can you guess what these intake snorkels are for? I bet you wont😉

Theres a FREE STICKER for anyone that guesses the right vehicle!

The last post may be giving it away🤐

Address

Landy Street
Briagolong, VIC
3860

Telephone

0456199576

Website

Alerts

Be the first to know and let us send you an email when 25th Hour Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to 25th Hour Fabrication:

Shortcuts

Share

Category