https://www.facebook.com/100617145892078/

Modified & Driven Fabrication

Name: Modified & Driven Fabrication
Address: Caboolture, QLD, 4510, AU
Telephone: +61421231835
Price range: $
Rating: 5

Home
Australia
Caboolture, QLD
Modified & Driven Fabrication

Call Directions

qualified automotive body builder
offering custom fabrication and repair work onsite available
(1)

01/11/2026

Another tidy addition to this super clean HQ build 🔥

We fitted a set of AES valves to finish off the exhaust setup, giving the customer the best of both worlds with the touch of a button.

Wanting to join the club with a reliable valve system get in touch for and AES Valve setup to suit your build

20/10/2026

🛠️ cylinderHead Saved by Modified and Driven Fabrication!

This customer came to us with a water jacket wall that had corroded away, hoping to save the cylinder head rather than replace it.
We got stuck into it, grinding all the corrosion back with carbide burrs before using the TIG to rebuild the damaged passage.

Once the weld repair was complete, the head was ready to head off to the machine shop, where they were able to machine the repaired area back to spec. 💪

Another example of how the right fabrication work can save parts that might otherwise be destined for the scrap pile!

At Modified and Driven Fabrication, we tackle the jobs others turn away

20/10/2026

Custom 4-inch aluminium intake pipe fabricated and fitted onsite for this stunning Nova! 🛠️

Built to suit the setup, with all work completed onsite for the ultimate in customer convenience. No mucking around with transport

we bring the fabrication to you! 💪

📍 From big jobs to small, we get it done.

20/09/2026

This crack in the stainless cyclone vacume tank was severely damping this vac trucks efficiency so we cam out out side of normal hours and got it tig welded back up
keeping the truck out on site making money

17/09/2026

🔧 FROM OFF-THE-SHELF TO SOMETHING DIFFERENT 🔥

After fitting an off-the-shelf exhaust system, this customer decided they wanted something a little different for the rear — so that’s where we came in.

We modified the existing system to a twin rear setup, exiting out both sides of the vehicle. This required modifying and cutting the rear bar to suit the new exhaust layout.

We fitted a pair of Growl mufflers, then finished it off with a set of custom-made exhaust tips, fabricated specifically to suit the new bumper cut-outs perfectly.

To top it all off, the tips were passivated after welding to remove the oxide layer, leaving them with a clean, polished finish that ties the whole setup together. 👌

Another example of why sometimes an off-the-shelf system is just the starting point

🔥custom fabrication is what makes it yours🔥

09/09/2026

🔒 A simple upgrade to make a bloody big difference

This truck had already had the factory whale-tail lock busted open, so the job was to come up with a stronger and more practical way of securing each compartment.

We fabricated and fitted custom padlock tabs to every door, giving each compartment its own solid locking point and making it a hell of a lot harder to simply force the doors open.

Sometimes the best solution isn't complicated🔧

Got a truck, trailer or piece of equipment that needs a stronger, smarter or custom solution?
Give us a call. We’ll build it to suit.

08/09/2026

2" bonnet-exit screamer pipe on this Toyota Mark II 🔥

Custom fabricated with a stainless steel dress ring on both the inside and outside of the bonnet, finished off with a custom heat shield to help protect the surrounding components from the heat.

Clean, functional and built specifically to suit the car — not just a hole cut in the bonnet. 👌

Got a custom idea for your build? Give us a call.

30/08/2026

A.E.S valves for when you feel like someones watching you 🤫🫣🤫

21/08/2026

Gate upgrade without replacing the existing posts 🔧

Fabricated and welded custom mounting plates to suit the electronic worm-drive gates openers increasing the post width to 100mm without having to replace the existing posts.

We then hung and installed the gates, ready for actuators instal

Another custom solution to get the job done without ripping everything out and starting again. 💪

15/08/2026

Big or small, we do it all. 🔧

From the smallest repairs and modifications to full custom fabrication projects — if it needs making, modifying or welding, give us a call.

📲 Contact us for your next job — big or small.

Address

Caboolture, QLD
4510

Telephone

+61421231835

Website

facebook.com

Alerts

Be the first to know and let us send you an email when Modified & Driven Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.